diff options
Diffstat (limited to 'src/libspeex/echo_diagnostic.m')
-rw-r--r-- | src/libspeex/echo_diagnostic.m | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/src/libspeex/echo_diagnostic.m b/src/libspeex/echo_diagnostic.m new file mode 100644 index 0000000..aebf390 --- /dev/null +++ b/src/libspeex/echo_diagnostic.m @@ -0,0 +1,72 @@ +% Attempts to diagnose AEC problems from recorded samples +% +% out = echo_diagnostic(rec_file, play_file, out_file, tail_length) +% +% Computes the full matrix inversion to cancel echo from the +% recording 'rec_file' using the far end signal 'play_file' using +% a filter length of 'tail_length'. The output is saved to 'out_file'. +function out = echo_diagnostic(rec_file, play_file, out_file, tail_length) + +F=fopen(rec_file,'rb'); +rec=fread(F,Inf,'short'); +fclose (F); +F=fopen(play_file,'rb'); +play=fread(F,Inf,'short'); +fclose (F); + +rec = [rec; zeros(1024,1)]; +play = [play; zeros(1024,1)]; + +N = length(rec); +corr = real(ifft(fft(rec).*conj(fft(play)))); +acorr = real(ifft(fft(play).*conj(fft(play)))); + +[a,b] = max(corr); + +if b > N/2 + b = b-N; +end +printf ("Far end to near end delay is %d samples\n", b); +if (b > .3*tail_length) + printf ('This is too much delay, try delaying the far-end signal a bit\n'); +else if (b < 0) + printf ('You have a negative delay, the echo canceller has no chance to cancel anything!\n'); + else + printf ('Delay looks OK.\n'); + end + end +end +N2 = round(N/2); +corr1 = real(ifft(fft(rec(1:N2)).*conj(fft(play(1:N2))))); +corr2 = real(ifft(fft(rec(N2+1:end)).*conj(fft(play(N2+1:end))))); + +[a,b1] = max(corr1); +if b1 > N2/2 + b1 = b1-N2; +end +[a,b2] = max(corr2); +if b2 > N2/2 + b2 = b2-N2; +end +drift = (b1-b2)/N2; +printf ('Drift estimate is %f%% (%d samples)\n', 100*drift, b1-b2); +if abs(b1-b2) < 10 + printf ('A drift of a few (+-10) samples is normal.\n'); +else + if abs(b1-b2) < 30 + printf ('There may be (not sure) excessive clock drift. Is the capture and playback done on the same soundcard?\n'); + else + printf ('Your clock is drifting! No way the AEC will be able to do anything with that. Most likely, you''re doing capture and playback from two different cards.\n'); + end + end +end +acorr(1) = .001+1.00001*acorr(1); +AtA = toeplitz(acorr(1:tail_length)); +bb = corr(1:tail_length); +h = AtA\bb; + +out = (rec - filter(h, 1, play)); + +F=fopen(out_file,'w'); +fwrite(F,out,'short'); +fclose (F); |