diff options
Diffstat (limited to 'src/opus-1.1/celt/rate.c')
-rw-r--r-- | src/opus-1.1/celt/rate.c | 638 |
1 files changed, 0 insertions, 638 deletions
diff --git a/src/opus-1.1/celt/rate.c b/src/opus-1.1/celt/rate.c deleted file mode 100644 index e13d839d..00000000 --- a/src/opus-1.1/celt/rate.c +++ /dev/null @@ -1,638 +0,0 @@ -/* Copyright (c) 2007-2008 CSIRO - Copyright (c) 2007-2009 Xiph.Org Foundation - Written by Jean-Marc Valin */ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER - OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include <math.h> -#include "modes.h" -#include "cwrs.h" -#include "arch.h" -#include "os_support.h" - -#include "entcode.h" -#include "rate.h" - -static const unsigned char LOG2_FRAC_TABLE[24]={ - 0, - 8,13, - 16,19,21,23, - 24,26,27,28,29,30,31,32, - 32,33,34,34,35,36,36,37,37 -}; - -#ifdef CUSTOM_MODES - -/*Determines if V(N,K) fits in a 32-bit unsigned integer. - N and K are themselves limited to 15 bits.*/ -static int fits_in32(int _n, int _k) -{ - static const opus_int16 maxN[15] = { - 32767, 32767, 32767, 1476, 283, 109, 60, 40, - 29, 24, 20, 18, 16, 14, 13}; - static const opus_int16 maxK[15] = { - 32767, 32767, 32767, 32767, 1172, 238, 95, 53, - 36, 27, 22, 18, 16, 15, 13}; - if (_n>=14) - { - if (_k>=14) - return 0; - else - return _n <= maxN[_k]; - } else { - return _k <= maxK[_n]; - } -} - -void compute_pulse_cache(CELTMode *m, int LM) -{ - int C; - int i; - int j; - int curr=0; - int nbEntries=0; - int entryN[100], entryK[100], entryI[100]; - const opus_int16 *eBands = m->eBands; - PulseCache *cache = &m->cache; - opus_int16 *cindex; - unsigned char *bits; - unsigned char *cap; - - cindex = (opus_int16 *)opus_alloc(sizeof(cache->index[0])*m->nbEBands*(LM+2)); - cache->index = cindex; - - /* Scan for all unique band sizes */ - for (i=0;i<=LM+1;i++) - { - for (j=0;j<m->nbEBands;j++) - { - int k; - int N = (eBands[j+1]-eBands[j])<<i>>1; - cindex[i*m->nbEBands+j] = -1; - /* Find other bands that have the same size */ - for (k=0;k<=i;k++) - { - int n; - for (n=0;n<m->nbEBands && (k!=i || n<j);n++) - { - if (N == (eBands[n+1]-eBands[n])<<k>>1) - { - cindex[i*m->nbEBands+j] = cindex[k*m->nbEBands+n]; - break; - } - } - } - if (cache->index[i*m->nbEBands+j] == -1 && N!=0) - { - int K; - entryN[nbEntries] = N; - K = 0; - while (fits_in32(N,get_pulses(K+1)) && K<MAX_PSEUDO) - K++; - entryK[nbEntries] = K; - cindex[i*m->nbEBands+j] = curr; - entryI[nbEntries] = curr; - - curr += K+1; - nbEntries++; - } - } - } - bits = (unsigned char *)opus_alloc(sizeof(unsigned char)*curr); - cache->bits = bits; - cache->size = curr; - /* Compute the cache for all unique sizes */ - for (i=0;i<nbEntries;i++) - { - unsigned char *ptr = bits+entryI[i]; - opus_int16 tmp[MAX_PULSES+1]; - get_required_bits(tmp, entryN[i], get_pulses(entryK[i]), BITRES); - for (j=1;j<=entryK[i];j++) - ptr[j] = tmp[get_pulses(j)]-1; - ptr[0] = entryK[i]; - } - - /* Compute the maximum rate for each band at which we'll reliably use as - many bits as we ask for. */ - cache->caps = cap = (unsigned char *)opus_alloc(sizeof(cache->caps[0])*(LM+1)*2*m->nbEBands); - for (i=0;i<=LM;i++) - { - for (C=1;C<=2;C++) - { - for (j=0;j<m->nbEBands;j++) - { - int N0; - int max_bits; - N0 = m->eBands[j+1]-m->eBands[j]; - /* N=1 bands only have a sign bit and fine bits. */ - if (N0<<i == 1) - max_bits = C*(1+MAX_FINE_BITS)<<BITRES; - else - { - const unsigned char *pcache; - opus_int32 num; - opus_int32 den; - int LM0; - int N; - int offset; - int ndof; - int qb; - int k; - LM0 = 0; - /* Even-sized bands bigger than N=2 can be split one more time. - As of commit 44203907 all bands >1 are even, including custom modes.*/ - if (N0 > 2) - { - N0>>=1; - LM0--; - } - /* N0=1 bands can't be split down to N<2. */ - else if (N0 <= 1) - { - LM0=IMIN(i,1); - N0<<=LM0; - } - /* Compute the cost for the lowest-level PVQ of a fully split - band. */ - pcache = bits + cindex[(LM0+1)*m->nbEBands+j]; - max_bits = pcache[pcache[0]]+1; - /* Add in the cost of coding regular splits. */ - N = N0; - for(k=0;k<i-LM0;k++){ - max_bits <<= 1; - /* Offset the number of qtheta bits by log2(N)/2 - + QTHETA_OFFSET compared to their "fair share" of - total/N */ - offset = ((m->logN[j]+((LM0+k)<<BITRES))>>1)-QTHETA_OFFSET; - /* The number of qtheta bits we'll allocate if the remainder - is to be max_bits. - The average measured cost for theta is 0.89701 times qb, - approximated here as 459/512. */ - num=459*(opus_int32)((2*N-1)*offset+max_bits); - den=((opus_int32)(2*N-1)<<9)-459; - qb = IMIN((num+(den>>1))/den, 57); - celt_assert(qb >= 0); - max_bits += qb; - N <<= 1; - } - /* Add in the cost of a stereo split, if necessary. */ - if (C==2) - { - max_bits <<= 1; - offset = ((m->logN[j]+(i<<BITRES))>>1)-(N==2?QTHETA_OFFSET_TWOPHASE:QTHETA_OFFSET); - ndof = 2*N-1-(N==2); - /* The average measured cost for theta with the step PDF is - 0.95164 times qb, approximated here as 487/512. */ - num = (N==2?512:487)*(opus_int32)(max_bits+ndof*offset); - den = ((opus_int32)ndof<<9)-(N==2?512:487); - qb = IMIN((num+(den>>1))/den, (N==2?64:61)); - celt_assert(qb >= 0); - max_bits += qb; - } - /* Add the fine bits we'll use. */ - /* Compensate for the extra DoF in stereo */ - ndof = C*N + ((C==2 && N>2) ? 1 : 0); - /* Offset the number of fine bits by log2(N)/2 + FINE_OFFSET - compared to their "fair share" of total/N */ - offset = ((m->logN[j] + (i<<BITRES))>>1)-FINE_OFFSET; - /* N=2 is the only point that doesn't match the curve */ - if (N==2) - offset += 1<<BITRES>>2; - /* The number of fine bits we'll allocate if the remainder is - to be max_bits. */ - num = max_bits+ndof*offset; - den = (ndof-1)<<BITRES; - qb = IMIN((num+(den>>1))/den, MAX_FINE_BITS); - celt_assert(qb >= 0); - max_bits += C*qb<<BITRES; - } - max_bits = (4*max_bits/(C*((m->eBands[j+1]-m->eBands[j])<<i)))-64; - celt_assert(max_bits >= 0); - celt_assert(max_bits < 256); - *cap++ = (unsigned char)max_bits; - } - } - } -} - -#endif /* CUSTOM_MODES */ - -#define ALLOC_STEPS 6 - -static OPUS_INLINE int interp_bits2pulses(const CELTMode *m, int start, int end, int skip_start, - const int *bits1, const int *bits2, const int *thresh, const int *cap, opus_int32 total, opus_int32 *_balance, - int skip_rsv, int *intensity, int intensity_rsv, int *dual_stereo, int dual_stereo_rsv, int *bits, - int *ebits, int *fine_priority, int C, int LM, ec_ctx *ec, int encode, int prev, int signalBandwidth) -{ - opus_int32 psum; - int lo, hi; - int i, j; - int logM; - int stereo; - int codedBands=-1; - int alloc_floor; - opus_int32 left, percoeff; - int done; - opus_int32 balance; - SAVE_STACK; - - alloc_floor = C<<BITRES; - stereo = C>1; - - logM = LM<<BITRES; - lo = 0; - hi = 1<<ALLOC_STEPS; - for (i=0;i<ALLOC_STEPS;i++) - { - int mid = (lo+hi)>>1; - psum = 0; - done = 0; - for (j=end;j-->start;) - { - int tmp = bits1[j] + (mid*(opus_int32)bits2[j]>>ALLOC_STEPS); - if (tmp >= thresh[j] || done) - { - done = 1; - /* Don't allocate more than we can actually use */ - psum += IMIN(tmp, cap[j]); - } else { - if (tmp >= alloc_floor) - psum += alloc_floor; - } - } - if (psum > total) - hi = mid; - else - lo = mid; - } - psum = 0; - /*printf ("interp bisection gave %d\n", lo);*/ - done = 0; - for (j=end;j-->start;) - { - int tmp = bits1[j] + (lo*bits2[j]>>ALLOC_STEPS); - if (tmp < thresh[j] && !done) - { - if (tmp >= alloc_floor) - tmp = alloc_floor; - else - tmp = 0; - } else - done = 1; - /* Don't allocate more than we can actually use */ - tmp = IMIN(tmp, cap[j]); - bits[j] = tmp; - psum += tmp; - } - - /* Decide which bands to skip, working backwards from the end. */ - for (codedBands=end;;codedBands--) - { - int band_width; - int band_bits; - int rem; - j = codedBands-1; - /* Never skip the first band, nor a band that has been boosted by - dynalloc. - In the first case, we'd be coding a bit to signal we're going to waste - all the other bits. - In the second case, we'd be coding a bit to redistribute all the bits - we just signaled should be cocentrated in this band. */ - if (j<=skip_start) - { - /* Give the bit we reserved to end skipping back. */ - total += skip_rsv; - break; - } - /*Figure out how many left-over bits we would be adding to this band. - This can include bits we've stolen back from higher, skipped bands.*/ - left = total-psum; - percoeff = left/(m->eBands[codedBands]-m->eBands[start]); - left -= (m->eBands[codedBands]-m->eBands[start])*percoeff; - rem = IMAX(left-(m->eBands[j]-m->eBands[start]),0); - band_width = m->eBands[codedBands]-m->eBands[j]; - band_bits = (int)(bits[j] + percoeff*band_width + rem); - /*Only code a skip decision if we're above the threshold for this band. - Otherwise it is force-skipped. - This ensures that we have enough bits to code the skip flag.*/ - if (band_bits >= IMAX(thresh[j], alloc_floor+(1<<BITRES))) - { - if (encode) - { - /*This if() block is the only part of the allocation function that - is not a mandatory part of the bitstream: any bands we choose to - skip here must be explicitly signaled.*/ - /*Choose a threshold with some hysteresis to keep bands from - fluctuating in and out.*/ -#ifdef FUZZING - if ((rand()&0x1) == 0) -#else - if (codedBands<=start+2 || (band_bits > ((j<prev?7:9)*band_width<<LM<<BITRES)>>4 && j<=signalBandwidth)) -#endif - { - ec_enc_bit_logp(ec, 1, 1); - break; - } - ec_enc_bit_logp(ec, 0, 1); - } else if (ec_dec_bit_logp(ec, 1)) { - break; - } - /*We used a bit to skip this band.*/ - psum += 1<<BITRES; - band_bits -= 1<<BITRES; - } - /*Reclaim the bits originally allocated to this band.*/ - psum -= bits[j]+intensity_rsv; - if (intensity_rsv > 0) - intensity_rsv = LOG2_FRAC_TABLE[j-start]; - psum += intensity_rsv; - if (band_bits >= alloc_floor) - { - /*If we have enough for a fine energy bit per channel, use it.*/ - psum += alloc_floor; - bits[j] = alloc_floor; - } else { - /*Otherwise this band gets nothing at all.*/ - bits[j] = 0; - } - } - - celt_assert(codedBands > start); - /* Code the intensity and dual stereo parameters. */ - if (intensity_rsv > 0) - { - if (encode) - { - *intensity = IMIN(*intensity, codedBands); - ec_enc_uint(ec, *intensity-start, codedBands+1-start); - } - else - *intensity = start+ec_dec_uint(ec, codedBands+1-start); - } - else - *intensity = 0; - if (*intensity <= start) - { - total += dual_stereo_rsv; - dual_stereo_rsv = 0; - } - if (dual_stereo_rsv > 0) - { - if (encode) - ec_enc_bit_logp(ec, *dual_stereo, 1); - else - *dual_stereo = ec_dec_bit_logp(ec, 1); - } - else - *dual_stereo = 0; - - /* Allocate the remaining bits */ - left = total-psum; - percoeff = left/(m->eBands[codedBands]-m->eBands[start]); - left -= (m->eBands[codedBands]-m->eBands[start])*percoeff; - for (j=start;j<codedBands;j++) - bits[j] += ((int)percoeff*(m->eBands[j+1]-m->eBands[j])); - for (j=start;j<codedBands;j++) - { - int tmp = (int)IMIN(left, m->eBands[j+1]-m->eBands[j]); - bits[j] += tmp; - left -= tmp; - } - /*for (j=0;j<end;j++)printf("%d ", bits[j]);printf("\n");*/ - - balance = 0; - for (j=start;j<codedBands;j++) - { - int N0, N, den; - int offset; - int NClogN; - opus_int32 excess, bit; - - celt_assert(bits[j] >= 0); - N0 = m->eBands[j+1]-m->eBands[j]; - N=N0<<LM; - bit = (opus_int32)bits[j]+balance; - - if (N>1) - { - excess = MAX32(bit-cap[j],0); - bits[j] = bit-excess; - - /* Compensate for the extra DoF in stereo */ - den=(C*N+ ((C==2 && N>2 && !*dual_stereo && j<*intensity) ? 1 : 0)); - - NClogN = den*(m->logN[j] + logM); - - /* Offset for the number of fine bits by log2(N)/2 + FINE_OFFSET - compared to their "fair share" of total/N */ - offset = (NClogN>>1)-den*FINE_OFFSET; - - /* N=2 is the only point that doesn't match the curve */ - if (N==2) - offset += den<<BITRES>>2; - - /* Changing the offset for allocating the second and third - fine energy bit */ - if (bits[j] + offset < den*2<<BITRES) - offset += NClogN>>2; - else if (bits[j] + offset < den*3<<BITRES) - offset += NClogN>>3; - - /* Divide with rounding */ - ebits[j] = IMAX(0, (bits[j] + offset + (den<<(BITRES-1))) / (den<<BITRES)); - - /* Make sure not to bust */ - if (C*ebits[j] > (bits[j]>>BITRES)) - ebits[j] = bits[j] >> stereo >> BITRES; - - /* More than that is useless because that's about as far as PVQ can go */ - ebits[j] = IMIN(ebits[j], MAX_FINE_BITS); - - /* If we rounded down or capped this band, make it a candidate for the - final fine energy pass */ - fine_priority[j] = ebits[j]*(den<<BITRES) >= bits[j]+offset; - - /* Remove the allocated fine bits; the rest are assigned to PVQ */ - bits[j] -= C*ebits[j]<<BITRES; - - } else { - /* For N=1, all bits go to fine energy except for a single sign bit */ - excess = MAX32(0,bit-(C<<BITRES)); - bits[j] = bit-excess; - ebits[j] = 0; - fine_priority[j] = 1; - } - - /* Fine energy can't take advantage of the re-balancing in - quant_all_bands(). - Instead, do the re-balancing here.*/ - if(excess > 0) - { - int extra_fine; - int extra_bits; - extra_fine = IMIN(excess>>(stereo+BITRES),MAX_FINE_BITS-ebits[j]); - ebits[j] += extra_fine; - extra_bits = extra_fine*C<<BITRES; - fine_priority[j] = extra_bits >= excess-balance; - excess -= extra_bits; - } - balance = excess; - - celt_assert(bits[j] >= 0); - celt_assert(ebits[j] >= 0); - } - /* Save any remaining bits over the cap for the rebalancing in - quant_all_bands(). */ - *_balance = balance; - - /* The skipped bands use all their bits for fine energy. */ - for (;j<end;j++) - { - ebits[j] = bits[j] >> stereo >> BITRES; - celt_assert(C*ebits[j]<<BITRES == bits[j]); - bits[j] = 0; - fine_priority[j] = ebits[j]<1; - } - RESTORE_STACK; - return codedBands; -} - -int compute_allocation(const CELTMode *m, int start, int end, const int *offsets, const int *cap, int alloc_trim, int *intensity, int *dual_stereo, - opus_int32 total, opus_int32 *balance, int *pulses, int *ebits, int *fine_priority, int C, int LM, ec_ctx *ec, int encode, int prev, int signalBandwidth) -{ - int lo, hi, len, j; - int codedBands; - int skip_start; - int skip_rsv; - int intensity_rsv; - int dual_stereo_rsv; - VARDECL(int, bits1); - VARDECL(int, bits2); - VARDECL(int, thresh); - VARDECL(int, trim_offset); - SAVE_STACK; - - total = IMAX(total, 0); - len = m->nbEBands; - skip_start = start; - /* Reserve a bit to signal the end of manually skipped bands. */ - skip_rsv = total >= 1<<BITRES ? 1<<BITRES : 0; - total -= skip_rsv; - /* Reserve bits for the intensity and dual stereo parameters. */ - intensity_rsv = dual_stereo_rsv = 0; - if (C==2) - { - intensity_rsv = LOG2_FRAC_TABLE[end-start]; - if (intensity_rsv>total) - intensity_rsv = 0; - else - { - total -= intensity_rsv; - dual_stereo_rsv = total>=1<<BITRES ? 1<<BITRES : 0; - total -= dual_stereo_rsv; - } - } - ALLOC(bits1, len, int); - ALLOC(bits2, len, int); - ALLOC(thresh, len, int); - ALLOC(trim_offset, len, int); - - for (j=start;j<end;j++) - { - /* Below this threshold, we're sure not to allocate any PVQ bits */ - thresh[j] = IMAX((C)<<BITRES, (3*(m->eBands[j+1]-m->eBands[j])<<LM<<BITRES)>>4); - /* Tilt of the allocation curve */ - trim_offset[j] = C*(m->eBands[j+1]-m->eBands[j])*(alloc_trim-5-LM)*(end-j-1) - *(1<<(LM+BITRES))>>6; - /* Giving less resolution to single-coefficient bands because they get - more benefit from having one coarse value per coefficient*/ - if ((m->eBands[j+1]-m->eBands[j])<<LM==1) - trim_offset[j] -= C<<BITRES; - } - lo = 1; - hi = m->nbAllocVectors - 1; - do - { - int done = 0; - int psum = 0; - int mid = (lo+hi) >> 1; - for (j=end;j-->start;) - { - int bitsj; - int N = m->eBands[j+1]-m->eBands[j]; - bitsj = C*N*m->allocVectors[mid*len+j]<<LM>>2; - if (bitsj > 0) - bitsj = IMAX(0, bitsj + trim_offset[j]); - bitsj += offsets[j]; - if (bitsj >= thresh[j] || done) - { - done = 1; - /* Don't allocate more than we can actually use */ - psum += IMIN(bitsj, cap[j]); - } else { - if (bitsj >= C<<BITRES) - psum += C<<BITRES; - } - } - if (psum > total) - hi = mid - 1; - else - lo = mid + 1; - /*printf ("lo = %d, hi = %d\n", lo, hi);*/ - } - while (lo <= hi); - hi = lo--; - /*printf ("interp between %d and %d\n", lo, hi);*/ - for (j=start;j<end;j++) - { - int bits1j, bits2j; - int N = m->eBands[j+1]-m->eBands[j]; - bits1j = C*N*m->allocVectors[lo*len+j]<<LM>>2; - bits2j = hi>=m->nbAllocVectors ? - cap[j] : C*N*m->allocVectors[hi*len+j]<<LM>>2; - if (bits1j > 0) - bits1j = IMAX(0, bits1j + trim_offset[j]); - if (bits2j > 0) - bits2j = IMAX(0, bits2j + trim_offset[j]); - if (lo > 0) - bits1j += offsets[j]; - bits2j += offsets[j]; - if (offsets[j]>0) - skip_start = j; - bits2j = IMAX(0,bits2j-bits1j); - bits1[j] = bits1j; - bits2[j] = bits2j; - } - codedBands = interp_bits2pulses(m, start, end, skip_start, bits1, bits2, thresh, cap, - total, balance, skip_rsv, intensity, intensity_rsv, dual_stereo, dual_stereo_rsv, - pulses, ebits, fine_priority, C, LM, ec, encode, prev, signalBandwidth); - RESTORE_STACK; - return codedBands; -} - |