Funko sources as released by Rotacak.HEADmaster

1 files changed, 296 insertions, 0 deletions

diff --git a/src/jpeg-6/jcmainct.c b/src/jpeg-6/jcmainct.c
new file mode 100644
index 0000000..42a02d0
--- /dev/null
+++ b/src/jpeg-6/jcmainct.c
@@ -0,0 +1,296 @@
+/*
+ * jcmainct.c
+ *
+ * Copyright (C) 1994-1995, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the main buffer controller for compression.
+ * The main buffer lies between the pre-processor and the JPEG
+ * compressor proper; it holds downsampled data in the JPEG colorspace.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Note: currently, there is no operating mode in which a full-image buffer
+ * is needed at this step.  If there were, that mode could not be used with
+ * "raw data" input, since this module is bypassed in that case.  However,
+ * we've left the code here for possible use in special applications.
+ */
+#undef FULL_MAIN_BUFFER_SUPPORTED
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_main_controller pub; /* public fields */
+
+  JDIMENSION cur_iMCU_row;	/* number of current iMCU row */
+  JDIMENSION rowgroup_ctr;	/* counts row groups received in iMCU row */
+  boolean suspended;		/* remember if we suspended output */
+  J_BUF_MODE pass_mode;		/* current operating mode */
+
+  /* If using just a strip buffer, this points to the entire set of buffers
+   * (we allocate one for each component).  In the full-image case, this
+   * points to the currently accessible strips of the virtual arrays.
+   */
+  JSAMPARRAY buffer[MAX_COMPONENTS];
+
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+  /* If using full-image storage, this array holds pointers to virtual-array
+   * control blocks for each component.  Unused if not full-image storage.
+   */
+  jvirt_sarray_ptr whole_image[MAX_COMPONENTS];
+#endif
+} my_main_controller;
+
+typedef my_main_controller * my_main_ptr;
+
+
+/* Forward declarations */
+METHODDEF void process_data_simple_main
+	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
+	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+METHODDEF void process_data_buffer_main
+	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
+	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
+#endif
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF void
+start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  // bk001204 - don't use main...
+  my_main_ptr jmain = (my_main_ptr) cinfo->main;
+
+  /* Do nothing in raw-data mode. */
+  if (cinfo->raw_data_in)
+    return;
+
+  jmain->cur_iMCU_row = 0;	/* initialize counters */
+  jmain->rowgroup_ctr = 0;
+  jmain->suspended = FALSE;
+  jmain->pass_mode = pass_mode;	/* save mode for use by process_data */
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    if (jmain->whole_image[0] != NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+    jmain->pub.process_data = process_data_simple_main;
+    break;
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+  case JBUF_SAVE_SOURCE:
+  case JBUF_CRANK_DEST:
+  case JBUF_SAVE_AND_PASS:
+    if (jmain->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    jmain->pub.process_data = process_data_buffer_main;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This routine handles the simple pass-through mode,
+ * where we have only a strip buffer.
+ */
+
+METHODDEF void
+process_data_simple_main (j_compress_ptr cinfo,
+			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			  JDIMENSION in_rows_avail)
+{
+  // bk001204 - don't use main
+  my_main_ptr jmain = (my_main_ptr) cinfo->main;
+
+  while (jmain->cur_iMCU_row < cinfo->total_iMCU_rows) {
+    /* Read input data if we haven't filled the main buffer yet */
+    if (jmain->rowgroup_ctr < DCTSIZE)
+      (*cinfo->prep->pre_process_data) (cinfo,
+					input_buf, in_row_ctr, in_rows_avail,
+					jmain->buffer, &jmain->rowgroup_ctr,
+					(JDIMENSION) DCTSIZE);
+
+    /* If we don't have a full iMCU row buffered, return to application for
+     * more data.  Note that preprocessor will always pad to fill the iMCU row
+     * at the bottom of the image.
+     */
+    if (jmain->rowgroup_ctr != DCTSIZE)
+      return;
+
+    /* Send the completed row to the compressor */
+    if (! (*cinfo->coef->compress_data) (cinfo, jmain->buffer)) {
+      /* If compressor did not consume the whole row, then we must need to
+       * suspend processing and return to the application.  In this situation
+       * we pretend we didn't yet consume the last input row; otherwise, if
+       * it happened to be the last row of the image, the application would
+       * think we were done.
+       */
+      if (! jmain->suspended) {
+	(*in_row_ctr)--;
+	jmain->suspended = TRUE;
+      }
+      return;
+    }
+    /* We did finish the row.  Undo our little suspension hack if a previous
+     * call suspended; then mark the main buffer empty.
+     */
+    if (jmain->suspended) {
+      (*in_row_ctr)++;
+      jmain->suspended = FALSE;
+    }
+    jmain->rowgroup_ctr = 0;
+    jmain->cur_iMCU_row++;
+  }
+}
+
+
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+
+/*
+ * Process some data.
+ * This routine handles all of the modes that use a full-size buffer.
+ */
+
+METHODDEF void
+process_data_buffer_main (j_compress_ptr cinfo,
+			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			  JDIMENSION in_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci;
+  jpeg_component_info *compptr;
+  boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
+
+  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+    /* Realign the virtual buffers if at the start of an iMCU row. */
+    if (main->rowgroup_ctr == 0) {
+      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	   ci++, compptr++) {
+	main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
+	  ((j_common_ptr) cinfo, main->whole_image[ci],
+	   main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
+	   (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
+      }
+      /* In a read pass, pretend we just read some source data. */
+      if (! writing) {
+	*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
+	main->rowgroup_ctr = DCTSIZE;
+      }
+    }
+
+    /* If a write pass, read input data until the current iMCU row is full. */
+    /* Note: preprocessor will pad if necessary to fill the last iMCU row. */
+    if (writing) {
+      (*cinfo->prep->pre_process_data) (cinfo,
+					input_buf, in_row_ctr, in_rows_avail,
+					main->buffer, &main->rowgroup_ctr,
+					(JDIMENSION) DCTSIZE);
+      /* Return to application if we need more data to fill the iMCU row. */
+      if (main->rowgroup_ctr < DCTSIZE)
+	return;
+    }
+
+    /* Emit data, unless this is a sink-only pass. */
+    if (main->pass_mode != JBUF_SAVE_SOURCE) {
+      if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+	/* If compressor did not consume the whole row, then we must need to
+	 * suspend processing and return to the application.  In this situation
+	 * we pretend we didn't yet consume the last input row; otherwise, if
+	 * it happened to be the last row of the image, the application would
+	 * think we were done.
+	 */
+	if (! main->suspended) {
+	  (*in_row_ctr)--;
+	  main->suspended = TRUE;
+	}
+	return;
+      }
+      /* We did finish the row.  Undo our little suspension hack if a previous
+       * call suspended; then mark the main buffer empty.
+       */
+      if (main->suspended) {
+	(*in_row_ctr)++;
+	main->suspended = FALSE;
+      }
+    }
+
+    /* If get here, we are done with this iMCU row.  Mark buffer empty. */
+    main->rowgroup_ctr = 0;
+    main->cur_iMCU_row++;
+  }
+}
+
+#endif /* FULL_MAIN_BUFFER_SUPPORTED */
+
+
+/*
+ * Initialize main buffer controller.
+ */
+
+GLOBAL void
+jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  // bk001204 - don't use main
+  my_main_ptr jmain;
+  int ci;
+  jpeg_component_info *compptr;
+
+  jmain = (my_main_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_main_controller));
+  cinfo->main = (struct jpeg_c_main_controller *) jmain;
+  jmain->pub.start_pass = start_pass_main;
+
+  /* We don't need to create a buffer in raw-data mode. */
+  if (cinfo->raw_data_in)
+    return;
+
+  /* Create the buffer.  It holds downsampled data, so each component
+   * may be of a different size.
+   */
+  if (need_full_buffer) {
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    /* Allocate a full-image virtual array for each component */
+    /* Note we pad the bottom to a multiple of the iMCU height */
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      jmain->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+	 compptr->width_in_blocks * DCTSIZE,
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor) * DCTSIZE,
+	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+    }
+#else
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+  } else {
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    jmain->whole_image[0] = NULL; /* flag for no virtual arrays */
+#endif
+    /* Allocate a strip buffer for each component */
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      jmain->buffer[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 compptr->width_in_blocks * DCTSIZE,
+	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+    }
+  }
+}