diff options
| author | Paweł Redman <pawel.redman@gmail.com> | 2017-03-22 17:56:34 +0100 |
|---|---|---|
| committer | Paweł Redman <pawel.redman@gmail.com> | 2017-03-22 17:56:34 +0100 |
| commit | 6a777afc079c2a8d3af3ecd2145fe8dd50567a39 (patch) | |
| tree | 520f4489cebf8564ef6cb27064ceea45cbc005b3 /src/tools/lcc/doc/4.html | |
Diffstat (limited to 'src/tools/lcc/doc/4.html')
| -rw-r--r-- | src/tools/lcc/doc/4.html | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/src/tools/lcc/doc/4.html b/src/tools/lcc/doc/4.html new file mode 100644 index 0000000..a2e1213 --- /dev/null +++ b/src/tools/lcc/doc/4.html @@ -0,0 +1,754 @@ +<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> +<html> + +<head> +<link HREF="mailto:drh@microsoft.com" REV="made" TITLE="David R. Hanson"> +<title>The lcc 4.1 Code-Generation Interface</title> +</head> + +<body> + +<h1>The lcc 4.1 Code-Generation Interface</h1> + +<p ALIGN="LEFT"><strong><a HREF="http://www.research.microsoft.com/~cwfraser/">Christopher +W. Fraser</a> and <a HREF="http://www.research.microsoft.com/~drh/">David R. Hanson</a>, <a +HREF="http://www.research.microsoft.com/">Microsoft Research</a></strong></p> + +<h2>Contents</h2> + +<dir> + <li><a HREF="#intro">Introduction</a> </li> + <li><a HREF="#metrics">5.1 Type Metrics</a></li> + <li><a HREF="#symbols">5.3 Symbols</a> </li> + <li><a HREF="#operators">5.5 Dag Operators</a></li> + <li><a HREF="#flags">5.6 Interface Flags</a></li> + <li><a HREF="#definitions">5.8 Definitions</a></li> + <li><a HREF="#constants">5.9 Constants</a></li> + <li><a HREF="#upcalls">5.12 Upcalls</a></li> +</dir> + +<h2><a NAME="intro">Introduction</a></h2> + +<p>Version 4.1 is the latest release of <a +HREF="http://www.cs.princeton.edu/software/lcc/">lcc</a>, the ANSI C compiler described in +our book <cite>A Retargetable C Compiler: Design and Implementation</cite> +(Addison-Wesley, 1995, ISBN 0-8053-1670-1). This document summarizes the differences +between the 4.1 code-generation interface and the 3.x interface described in Chap. 5 of <cite>A +Retargetable C Compiler</cite>.</p> + +<p>Previous versions of lcc supported only three sizes of integers, two sizes of floats, +and insisted that pointers fit in unsigned integers (see Sec. 5.1 of <cite>A Retargetable +C Compiler</cite>). These assumptions simplified the compiler, and were suitable for +32-bit architectures. But on 64-bit architectures, such as the DEC ALPHA, it's natural to +have four sizes of integers and perhaps three sizes of floats, and on 16-bit +architectures, 32-bit pointers don't fit in unsigned integers. Also, the 3.x constaints +limited the use of lcc's back ends for other languages, such as Java.</p> + +<p>Version 4.x removes all of these restrictions: It supports any number of sizes for +integers and floats, and the size of pointers need not be related to the size of any of +the integer types. The major changes in the code-generation interface are: + +<ul> + <li>The number of type suffixes has been reduced to 6.</li> + <li>Dag operators are composed of a generic operator, a type suffix, and a size.</li> + <li>Unsigned variants of several operators have been added.</li> + <li>Several interface functions have new signatures.</li> +</ul> + +<p>In addition, version 4.x is written in ANSI C and uses the standard I/O library and +other standard C functions.</p> + +<p>The sections below parallel the subsections of Chap. 5 of <cite>A Retargetable C +Compiler</cite> and summarize the differences between the 3.x and 4.x code-generation +interface. Unaffected subsections are omitted. Page citations refer to pages in <cite>A +Retargetable C Compiler</cite>.</p> + +<h2><a NAME="metrics">5.1 Type Metrics</a></h2> + +<p>There are now 10 metrics in an interface record:</p> + +<pre>Metrics charmetric; +Metrics shortmetric; +Metrics intmetric; +Metrics longmetric; +Metrics longlongmetric; +Metrics floatmetric; +Metrics doublemetric; +Metrics longdoublemetric; +Metrics ptrmetric; +Metrics structmetric;</pre> + +<p>Each of these specifies the size and alignment of the corresponding type. <code>ptrmetric</code> +describes all pointers.</p> + +<h2><a NAME="symbols">5.3 Symbols</a></h2> + +<p>The actual value of a constant is stored in the <code>u.c.v</code> field of a symbol, +which holds a <code>Value</code>:</p> + +<pre>typedef union value { + long i; + unsigned long u; + long double d; + void *p; + void (*g)(void); +} Value;</pre> + +<p>The value is stored in the appropriate field according to its type, which is given by +the symbol's <code>type</code> field.</p> + +<h2><a NAME="operators">5.5 Dag Operators</a></h2> + +<p>The <code>op</code> field a of <code>node</code> structure holds a dag operator, which +consists of a generic operator, a type suffix, and a size indicator. The type suffixes +are:</p> + +<pre>enum { + F=FLOAT, + I=INT, + U=UNSIGNED, + P=POINTER, + V=VOID, + B=STRUCT +}; + +#define sizeop(n) ((n)<<10)</pre> + +<p>Given a generic operator <code>o</code>, a type suffix <code>t</code>, and a size <code>s</code>, +a type- and size-specific operator is formed by <code>o+t+sizeop(s)</code>. For example, <code>ADD+F+sizeop(4)</code> +forms the operator <code>ADDF4</code>, which denotes the sum of two 4-byte floats. +Similarly, <code>ADD+F+sizeop(8)</code> forms <code>ADDF8</code>, which denotes 8-byte +floating addition. In the 3.x code-generation interface, <code>ADDF</code> and <code>ADDD</code> +denoted these operations. There was no size indicator in the 3.x operators because the +type suffix supplied both a type and a size.</p> + +<p>Table 5.1 lists each generic operator, its valid type suffixes, and the number of <code>kids</code> +and <code>syms</code> that it uses; multiple values for <code>kids</code> indicate +type-specific variants. The notations in the <strong>syms</strong> column give the number +of <code>syms</code> values and a one-letter code that suggests their uses: 1V indicates +that <code>syms[0]</code> points to a symbol for a variable, 1C indicates that <code>syms[0]</code> +is a constant, and 1L indicates that <code>syms[0]</code> is a label. For 1S, <code>syms[0]</code> +is a constant whose value is a size in bytes; 2S adds <code>syms[1]</code>, which is a +constant whose value is an alignment. For most operators, the type suffix and size +indicator denote the type and size of operation to perform and the type and size of the +result.</p> + +<table WIDTH="100%" BORDER="0" CELLPADDING="0" CELLSPACING="0"> + <tr> + <td COLSPAN="6" ALIGN="CENTER"><strong>Table 5.1<img SRC="/~drh/resources/dot_clear.gif" + ALT="|" WIDTH="18" HEIGHT="1">Node Operators.</strong></td> + </tr> + <tr> + <td><strong>syms</strong></td> + <td><strong>kids</strong></td> + <td><strong>Operator</strong></td> + <td><strong>Type Suffixes</strong></td> + <td><strong>Sizes</strong></td> + <td><strong>Operation</strong></td> + </tr> + <tr> + <td>1V</td> + <td>0</td> + <td><code>ADDRF</code></td> + <td><code>...P..</code></td> + <td>p</td> + <td>address of a parameter</td> + </tr> + <tr> + <td>1V</td> + <td>0</td> + <td><code>ADDRG</code></td> + <td><code>...P..</code></td> + <td>p</td> + <td>address of a global</td> + </tr> + <tr> + <td>1V</td> + <td>0</td> + <td><code>ADDRL</code></td> + <td><code>...P..</code></td> + <td>p</td> + <td>address of a local</td> + </tr> + <tr> + <td>1C</td> + <td>0</td> + <td><code>CNST</code></td> + <td><code>FIUP..</code></td> + <td>fdx csilh p</td> + <td>constant</td> + </tr> + <tr ALIGN="LEFT" VALIGN="TOP"> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="1" HEIGHT="12"></td> + <td></td> + <td></td> + <td></td> + <td></td> + <td></td> + </tr> + <tr> + <td></td> + <td>1</td> + <td><code>BCOM</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>bitwise complement</td> + </tr> + <tr> + <td>1S</td> + <td>1</td> + <td><code>CVF</code></td> + <td><code>FI....</code></td> + <td>fdx ilh</td> + <td>convert from float</td> + </tr> + <tr> + <td>1S</td> + <td>1</td> + <td><code>CVI</code></td> + <td><code>FIU...</code></td> + <td>fdx csilh csilhp</td> + <td>convert from signed integer</td> + </tr> + <tr> + <td>1S</td> + <td>1</td> + <td><code>CVP</code></td> + <td><code>..U..</code></td> + <td>p</td> + <td>convert from pointer</td> + </tr> + <tr> + <td>1S</td> + <td>1</td> + <td><code>CVU</code></td> + <td><code>.IUP..</code></td> + <td>csilh p</td> + <td>convert from unsigned integer</td> + </tr> + <tr> + <td></td> + <td>1</td> + <td><code>INDIR</code></td> + <td><code>FIUP.B</code></td> + <td>fdx csilh p</td> + <td>fetch</td> + </tr> + <tr> + <td></td> + <td>1</td> + <td><code>NEG</code></td> + <td><code>FI....</code></td> + <td>fdx ilh</td> + <td>negation</td> + </tr> + <tr> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="1" HEIGHT="12"></td> + <td></td> + <td></td> + <td></td> + <td></td> + <td></td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>ADD</code></td> + <td><code>FIUP..</code></td> + <td>fdx ilh ilhp p</td> + <td>addition</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>BAND</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>bitwise AND</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>BOR</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>bitwise inclusive OR</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>BXOR</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>bitwise exclusive OR</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>DIV</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh</td> + <td>division</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>LSH</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>left shift</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>MOD</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>modulus</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>MUL</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh</td> + <td>multiplication</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>RSH</code></td> + <td><code>.IU...</code></td> + <td>ilh</td> + <td>right shift</td> + </tr> + <tr> + <td></td> + <td>2</td> + <td><code>SUB</code></td> + <td><code>FIUP..</code></td> + <td>fdx ilh ilhp p</td> + <td>subtraction</td> + </tr> + <tr> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="1" HEIGHT="12"></td> + <td></td> + <td></td> + <td></td> + <td></td> + <td></td> + </tr> + <tr> + <td>2S</td> + <td>2</td> + <td><code>ASGN</code></td> + <td><code>FIUP.B</code></td> + <td>fdx csilh p</td> + <td>assignment</td> + </tr> + <tr> + <td>1L</td> + <td>2</td> + <td><code>EQ</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh ilhp</td> + <td>jump if equal</td> + </tr> + <tr> + <td>1L</td> + <td>2</td> + <td><code>GE</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh ilhp</td> + <td>jump if greater than or equal</td> + </tr> + <tr> + <td>1L</td> + <td>2</td> + <td><code>GT</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh ilhp</td> + <td>jump if greater than</td> + </tr> + <tr> + <td>1L</td> + <td>2</td> + <td><code>LE</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh ilhp</td> + <td>jump if less than or equal</td> + </tr> + <tr> + <td>1L</td> + <td>2</td> + <td><code>LT</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh ilhp</td> + <td>jump if less than</td> + </tr> + <tr> + <td>1L</td> + <td>2</td> + <td><code>NE</code></td> + <td><code>FIU...</code></td> + <td>fdx ilh ilhp</td> + <td>jump if not equal</td> + </tr> + <tr> + <td></td> + <td></td> + <td></td> + <td></td> + <td></td> + <td></td> + </tr> + <tr> + <td>2S</td> + <td>1</td> + <td><code>ARG</code></td> + <td><code>FIUP.B</code></td> + <td>fdx ilh p</td> + <td>argument</td> + </tr> + <tr> + <td>1</td> + <td>1 or 2</td> + <td><code>CALL</code></td> + <td><code>FIUPVB</code></td> + <td>fdx ilh p</td> + <td>function call</td> + </tr> + <tr> + <td></td> + <td>1</td> + <td><code>RET</code></td> + <td><code>FIUPV.</code></td> + <td>fdx ilh p</td> + <td>return from function</td> + </tr> + <tr> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="1" HEIGHT="12"></td> + <td></td> + <td></td> + <td></td> + <td></td> + <td></td> + </tr> + <tr> + <td></td> + <td>1</td> + <td><code>JUMP</code></td> + <td><code>....V.</code></td> + <td></td> + <td>unconditional jump</td> + </tr> + <tr> + <td>1L</td> + <td>0</td> + <td><code>LABEL</code></td> + <td><code>....V.</code></td> + <td></td> + <td>label definition</td> + </tr> +</table> + +<p>The entries in the <strong>Sizes</strong> column indicate sizes of the operators that +back ends must implement. Letters denote the size of float (f), double (d), long double +(x), character (c), short integer (s), integer (i), long integer (l), "long +long" integer (h) , and pointer (p). These sizes are separated into sets for each +type suffix, except that a single set is used for both I and U when the set for I is +identical to the set for U.</p> + +<p>The actual values for the size indicators, fdxcsilhp, depend on the target. A +specification like <code>ADDF</code>f denotes the operator <code>ADD+F+sizeop(</code>f<code>)</code>, +where "f" is replaced by a target-dependent value, e.g., <code>ADDF4</code> and <code>ADDF8</code>. +For example, back ends must implement the following <code>CVI</code> and <code>MUL</code> +operators.</p> + +<blockquote> + <p><code>CVIF</code>f <code>CVIF</code>d <code>CVIF</code>x<br> + <code>CVII</code>c <code>CVII</code>s <code>CVII</code>i <code>CVII</code>l <code>CVII</code>h<br> + <code>CVIU</code>c <code>CVIU</code>s <code>CVIU</code>i <code>CVIU</code>l <code>CVIU</code>h + <code>CVIU</code>p<br> + <br> + <code>MULF</code>f <code>MULF</code>d <code>MULF</code>x<br> + <code>MULI</code>i <code>MULI</code>l <code>MULI</code>h<br> + <code>MULU</code>i <code>MULU</code>l <code>MULU</code>h</p> +</blockquote> + +<p>On most platforms, there are fewer than three sizes of floats and six sizes of +integers, and pointers are usually the same size as one of the integers. And lcc doesn't +support the "long long" type, so h is not currently used. So the set of +platform-specific operators is usually smaller than the list above suggests. For example, +the X86, SPARC, and MIPS back ends implement the following <code>CVI</code> and <code>MUL</code> +operators.</p> + +<blockquote> + <p><code>CVIF</code>4 <code>CVIF</code>8<br> + <code>CVII</code>1 <code>CVII</code>2 <code>CVII</code>4<br> + <code>CVIU</code>1 <code>CVIU</code>2 <code>CVIU</code>4 <br> + <br> + <code>MULF</code>4 <code>MULF</code>8<br> + <code>MULI</code>4<br> + <code>MULU</code>4</p> +</blockquote> + +<p>The set of operators is thus target-dependent; for example, <code>ADDI8</code> appears +only if the target supports an 8-byte integer type. <a +HREF="ftp://ftp.cs.princeton.edu/pub/packages/lcc/contrib/ops.c"><code>ops.c</code></a> is +a program that, given a set of sizes, prints the required operators and their values, +e.g.,</p> + +<blockquote> + <pre>% <em>ops c=1 s=2 i=4 l=4 h=4 f=4 d=8 x=8 p=4</em> +... + CVIF4=4225 CVIF8=8321 + CVII1=1157 CVII2=2181 CVII4=4229 + CVIU1=1158 CVIU2=2182 CVIU4=4230 +... + MULF4=4561 MULF8=8657 + MULI4=4565 + MULU4=4566 +... +131 operators</pre> +</blockquote> + +<p>The type suffix for a conversion operator denotes the type of the result and the size +indicator gives the size of the result. For example, <code>CVUI4</code> converts an +unsigned (<code>U</code>) to a 4-byte signed integer (<code>I4</code>). The <code>syms[0]</code> +field points to a symbol-table entry for a integer constant that gives the size of the +source operand. For example, if <code>syms[0]</code> in a <code>CVUI4</code> points to a +symbol-table entry for 2, the conversion widens a 2-byte unsigned integer to a 4-byte +signed integer. Conversions that widen unsigned integers zero-extend; those that widen +signed integers sign-extend.</p> + +<p>The front end composes conversions between types <em>T</em><sub>1</sub> and <em>T</em><sub>2</sub> +by widening <em>T</em><sub>1</sub> to it's "supertype", if necessary, converting +that result to <em>T</em><sub>2</sub>'s supertype, then narrowing the result to <em>T</em><sub>2</sub>, +if necessary. The following table lists the supertypes; omitted entries are their own +supertypes.</p> + +<blockquote> + <table BORDER="0" CELLPADDING="0" CELLSPACING="0"> + <tr> + <td><strong>Type</strong></td> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="24" HEIGHT="1"></td> + <td><strong>Supertype</strong></td> + </tr> + <tr> + <td>signed char</td> + <td></td> + <td>int</td> + </tr> + <tr> + <td>signed short</td> + <td></td> + <td>int</td> + </tr> + <tr ALIGN="LEFT" VALIGN="TOP"> + <td>unsigned char</td> + <td></td> + <td>int, if sizeof (char) < sizeof (int)<br> + unsigned, otherwise</td> + </tr> + <tr ALIGN="LEFT" VALIGN="TOP"> + <td>unsigned short</td> + <td></td> + <td>int, if sizeof (short) < sizeof (int)<br> + unsigned, otherwise</td> + </tr> + <tr ALIGN="LEFT" VALIGN="TOP"> + <td>void *</td> + <td></td> + <td>an unsigned type as large as a pointer</td> + </tr> + </table> +</blockquote> + +<p>Pointers are converted to an unsigned type of the same size, even when that type is not +one of the integer types.</p> + +<p>For example, the front end converts a signed short to a float by first converting it to +an int and then to a float. It converts an unsigned short to an int with a single <code>CVUI</code>i +conversion, when shorts are smaller than ints.</p> + +<p>There are now signed and unsigned variants of <code>ASGN</code>, <code>INDIR</code>, <code>BCOM</code>, +<code>BOR</code>, <code>BXOR</code>, <code>BAND</code>, <code>ARG</code>, <code>CALL</code>, +and <code>RET</code> to simplify code generation on platforms that use different +instructions or register set for signed and unsigned operations. Likewise there are now +pointer variants of <code>ASGN</code>, <code>INDIR</code>, <code>ARG</code>, <code>CALL</code>, +and <code>RET</code>.</p> + +<h2><a NAME="flags">5.6 Interface Flags</a></h2> + +<pre>unsigned unsigned_char:1;</pre> + +<p>tells the front end whether plain characters are signed or unsigned. If it's zero, char +is a signed type; otherwise, char is an unsigned type.</p> + +<p>All the interface flags can be set by command-line options, e.g., <code>-Wf-unsigned_char=1</code> +causes plain characters to be unsigned.</p> + +<h2><a NAME="definitions">5.8 Definitions</a></h2> + +<p>The front end announces local variables by calling</p> + +<pre>void (*local)(Symbol);</pre> + +<p>It announces temporaries likewise; these have the symbol's <code>temporary</code> flag +set, which indicates that the symbol will be used only in the next call to <code>gen</code>. +If a temporary's <code>u.t.cse</code> field is nonnull, it points to the node that +computes the value assigned to the temporary; see page 346.</p> + +<p>The front end calls</p> + +<pre>void (*address)(Symbol p, Symbol q, long n);</pre> + +<p>to initialize <code>q</code> to a symbol that represents an address of the form <em>x</em>+<code>n</code>, +where <em>x</em> is the address represented by <code>p</code> and the long integer <code>n</code> +is positive or negative.</p> + +<h2><a NAME="constants">5.9 Constants</a></h2> + +<p>The interface function</p> + +<pre>void (*defconst)(int suffix, int size, Value v);</pre> + +<p>initializes constants. defconst emits directives to define a cell and initialize it to +a constant value. v is the constant value, suffix identifies the type of the value, and +size is the size of the value in bytes. The value of suffix indicates which field of v +holds the value, as shown in the following table.</p> + +<blockquote> + <table BORDER="0" CELLPADDING="1" CELLSPACING="1"> + <tr> + <td><strong>suffix</strong></td> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="24" HEIGHT="1"></td> + <td><strong>v Field</strong></td> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="24" HEIGHT="1"></td> + <td><strong>size</strong></td> + </tr> + <tr> + <td><code>F</code></td> + <td></td> + <td><code>v.d</code></td> + <td></td> + <td>float, double, long double</td> + </tr> + <tr> + <td><code>I</code></td> + <td></td> + <td><code>v.i</code></td> + <td></td> + <td>signed char, signed short, signed int, signed long</td> + </tr> + <tr> + <td><code>U</code></td> + <td></td> + <td><code>v.u</code></td> + <td></td> + <td>unsigned char, unsigned short, unsigned int, unsigned long</td> + </tr> + <tr> + <td><code>P</code></td> + <td></td> + <td><code>v.p</code></td> + <td></td> + <td>void *</td> + </tr> + </table> +</blockquote> + +<p><code>defconst</code> must narrow <code>v.</code>x when <code>size</code> is less than <code>sizeof</code> +<code>v.</code>x; e.g., to emit an unsigned char, <code>defconst</code> should emit <code>(unsigned +char)v.i</code>.</p> + +<h2><a NAME="upcalls">5.12 Upcalls</a></h2> + +<p>lcc 4.x uses standard I/O and its I/O functions have been changed accordingly. lcc +reads input from the standard input, emits code to the standard output, and writes +diagnostics to the standard error output. It uses <code>freopen</code> to redirect these +streams to explicit files, when necessary.</p> + +<p><code>bp</code>, <code>outflush</code>, and <code>outs</code> have been eliminated.</p> + +<pre>extern void fprint(FILE *f, const char *fmt, ...); +extern void print(const char *fmt, ...);</pre> + +<p>print formatted data to file <code>f</code> (<code>fprint</code>) or the standard +output (<code>print</code>). These functions are like standard C's <code>printf</code> and +<code>fprintf</code>, but support only some of the standard conversion specifiers and do +not support flags, precision, and field-width specifications. They support the following +new conversion specifiers in addition to those described on page 99.</p> + +<blockquote> + <table BORDER="0" CELLPADDING="0" CELLSPACING="0"> + <tr> + <td><strong>Specifiers</strong></td> + <td><img SRC="/~drh/resources/dot_clear.gif" ALT="|" WIDTH="24" HEIGHT="1"></td> + <td><strong>Corresponding printf Specifiers</strong></td> + </tr> + <tr> + <td><code>%c</code></td> + <td></td> + <td><code>%c</code></td> + </tr> + <tr> + <td><code>%d %D</code></td> + <td></td> + <td><code>%d %ld</code></td> + </tr> + <tr> + <td><code>%u %U</code></td> + <td></td> + <td><code>%u %lu</code></td> + </tr> + <tr> + <td><code>%x %X</code></td> + <td></td> + <td><code>%x %lx</code></td> + </tr> + <tr> + <td><code>%f %e %g</code></td> + <td></td> + <td><code>%e %f %g</code></td> + </tr> + <tr ALIGN="LEFT" VALIGN="TOP"> + <td><code>%p</code></td> + <td></td> + <td>Converts the corresponding void * argument to unsigned long and prints it with the <code>printf</code> + <code>%#x</code> specifier or just <code>%x</code> when the argument is null.</td> + </tr> + <tr ALIGN="LEFT" VALIGN="TOP"> + <td><code>%I</code></td> + <td></td> + <td>Prints the number of spaces given by the corresponding argument.</td> + </tr> + </table> +</blockquote> + +<pre>#define generic(op) ((op)&0x3F0) +#define specific(op) ((op)&0x3FF)</pre> + +<p><code>generic(op)</code> returns the generic variant of <code>op</code>; that is, +without its type suffix and size indicator. <code>specific(op)</code> returns the +type-specific variant of <code>op</code>; that is, without its size indicator.</p> + +<p><code>newconst</code> has been replaced by</p> + +<pre>extern Symbol intconst(int n);</pre> + +<p>which installs the integer constant <code>n</code> in the symbol table, if necessary, +and returns a pointer to the symbol-table entry.</p> + +<hr> + +<address> + <a HREF="http://www.research.microsoft.com/~cwfraser/">Chris Fraser</a> / <a + HREF="mailto:cwfraser@microsoft.com">cwfraser@microsoft.com</a><br> + <a HREF="http://www.research.microsoft.com/~drh/">David Hanson</a> / <a + HREF="mailto:drh@microsoft.com">drh@microsoft.com</a><br> + $Revision: 145 $ $Date: 2001-10-17 16:53:10 -0500 (Wed, 17 Oct 2001) $ +</address> +</body> +</html> |