diff options
Diffstat (limited to 'src/qcommon/unzip.c')
| -rw-r--r-- | src/qcommon/unzip.c | 4297 |
1 files changed, 4297 insertions, 0 deletions
diff --git a/src/qcommon/unzip.c b/src/qcommon/unzip.c new file mode 100644 index 0000000..ac95609 --- /dev/null +++ b/src/qcommon/unzip.c @@ -0,0 +1,4297 @@ +/***************************************************************************** + * name: unzip.c + * + * desc: IO on .zip files using portions of zlib + * + * $Archive: /MissionPack/code/qcommon/unzip.c $ + * + *****************************************************************************/ + +#include "../client/client.h" +#include "unzip.h" + +/* unzip.h -- IO for uncompress .zip files using zlib + Version 0.15 beta, Mar 19th, 1998, + + Copyright (C) 1998 Gilles Vollant + + This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g + WinZip, InfoZip tools and compatible. + Encryption and multi volume ZipFile (span) are not supported. + Old compressions used by old PKZip 1.x are not supported + + THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE + CAN CHANGE IN FUTURE VERSION !! + I WAIT FEEDBACK at mail info@winimage.com + Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution + + Condition of use and distribution are the same than zlib : + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + +*/ +/* for more info about .ZIP format, see + ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip + PkWare has also a specification at : + ftp://ftp.pkware.com/probdesc.zip */ + +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.1.3, July 9th, 1998 + + Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-1998 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + + +#ifndef _ZCONF_H +#define _ZCONF_H + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +#define OF(args) args +#endif + +typedef unsigned char Byte; /* 8 bits */ +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ +typedef Byte *voidp; + +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#endif /* _ZCONF_H */ + +#define ZLIB_VERSION "1.1.3" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +/* Allowed flush values; see deflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Possible values of the data_type field */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL (void *)0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +// static const char * zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +int deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +// static int deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so (that is, total_in bytes). + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). +*/ + + +// static int deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +int inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +static int inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_SYNC_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise + it sets strm->adler to the adler32 checksum of all output produced + so (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. +*/ + + +static int inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +int deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +/* +static int deflateSetDictionary OF((z_streamp strm, + const Byte *dictionary, + uInt dictLength)); +*/ +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. + + Upon return of this function, strm->adler is set to the Adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +/* +static int deflateCopy OF((z_streamp dest, + z_streamp source)); +*/ +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +// static int deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +/* +static int deflateParams OF((z_streamp strm, + int level, + int strategy)); +*/ +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +/* +int inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative + memLevel). msg is set to null if there is no error message. inflateInit2 + does not perform any decompression apart from reading the zlib header if + present: this will be done by inflate(). (So next_in and avail_in may be + modified, but next_out and avail_out are unchanged.) +*/ + +/* +static int inflateSetDictionary OF((z_streamp strm, + const Byte *dictionary, + uInt dictLength)); +*/ +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate + if this call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler32 value returned by this call of + inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary). + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +// static int inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +static int inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +/* +static int compress OF((Byte *dest, uLong *destLen, + const Byte *source, uLong sourceLen)); +*/ +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +/* +static int compress2 OF((Byte *dest, uLong *destLen, + const Byte *source, uLong sourceLen, + int level)); +*/ +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +/* +static int uncompress OF((Byte *dest, uLong *destLen, + const Byte *source, uLong sourceLen)); +*/ +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ + + +typedef voidp gzFile; + +gzFile gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h". (See the description + of deflateInit2 for more information about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +gzFile gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +int gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +int gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +int gzwrite OF((gzFile file, + const voidp buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +int QDECL gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ + +int gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +char * gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +int gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +int gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +int gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +long gzseek OF((gzFile file, + long offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +int gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +long gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +int gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +int gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +// static const char * gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +static uLong adler32 OF((uLong adler, const Byte *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +/* +static int deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +static int inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +static int deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +*/ +static int inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); + +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + + +// static const char * zError OF((int err)); +// static int inflateSyncPoint OF((z_streamp z)); +// static const uLong * get_crc_table OF((void)); + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +// static const char *z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = (char*)ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + + /* Common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#ifdef HAVE_STRERROR + extern char *strerror OF((int)); +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + +#define zmemcpy Com_Memcpy +#define zmemcmp memcmp +#define zmemzero(dest, len) Com_Memset(dest, 0, len) + +/* Diagnostic functions */ +#ifdef _ZIP_DEBUG_ + int z_verbose = 0; +# define Assert(cond,msg) assert(cond); + //{if(!(cond)) Sys_Error(msg);} +# define Trace(x) {if (z_verbose>=0) Sys_Error x ;} +# define Tracev(x) {if (z_verbose>0) Sys_Error x ;} +# define Tracevv(x) {if (z_verbose>1) Sys_Error x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) Sys_Error x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) Sys_Error x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (*check_func) OF((uLong check, const Byte *buf, uInt len)); +static voidp zcalloc OF((voidp opaque, unsigned items, unsigned size)); +static void zcfree OF((voidp opaque, voidp ptr)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidp)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + + +#if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) && \ + !defined(CASESENSITIVITYDEFAULT_NO) +#define CASESENSITIVITYDEFAULT_NO +#endif + + +#ifndef UNZ_BUFSIZE +#define UNZ_BUFSIZE (65536) +#endif + +#ifndef UNZ_MAXFILENAMEINZIP +#define UNZ_MAXFILENAMEINZIP (256) +#endif + +#ifndef ALLOC +# define ALLOC(size) (Z_Malloc(size)) +#endif +#ifndef TRYFREE +# define TRYFREE(p) {if (p) Z_Free(p);} +#endif + +#define SIZECENTRALDIRITEM (0x2e) +#define SIZEZIPLOCALHEADER (0x1e) + + + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ + +/* +static int unzlocal_getByte(FILE *fin,int *pi) +{ + unsigned char c; + int err = fread(&c, 1, 1, fin); + if (err==1) + { + *pi = (int)c; + return UNZ_OK; + } + else + { + if (ferror(fin)) + return UNZ_ERRNO; + else + return UNZ_EOF; + } +} +*/ + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets +*/ +static int unzlocal_getShort (FILE* fin, uLong *pX) +{ + short v; + + fread( &v, sizeof(v), 1, fin ); + + *pX = LittleShort( v); + return UNZ_OK; + +/* + uLong x ; + int i; + int err; + + err = unzlocal_getByte(fin,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +*/ +} + +static int unzlocal_getLong (FILE *fin, uLong *pX) +{ + int v; + + fread( &v, sizeof(v), 1, fin ); + + *pX = LittleLong( v); + return UNZ_OK; + +/* + uLong x ; + int i; + int err; + + err = unzlocal_getByte(fin,&i); + x = (uLong)i; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<8; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<16; + + if (err==UNZ_OK) + err = unzlocal_getByte(fin,&i); + x += ((uLong)i)<<24; + + if (err==UNZ_OK) + *pX = x; + else + *pX = 0; + return err; +*/ +} + + +/* My own strcmpi / strcasecmp */ +static int strcmpcasenosensitive_internal (const char* fileName1,const char* fileName2) +{ + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1<c2) + return -1; + if (c1>c2) + return 1; + } +} + + +#ifdef CASESENSITIVITYDEFAULT_NO +#define CASESENSITIVITYDEFAULTVALUE 2 +#else +#define CASESENSITIVITYDEFAULTVALUE 1 +#endif + +#ifndef STRCMPCASENOSENTIVEFUNCTION +#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal +#endif + +/* + Compare two filename (fileName1,fileName2). + If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) + If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi + or strcasecmp) + If iCaseSenisivity = 0, case sensitivity is defaut of your operating system + (like 1 on Unix, 2 on Windows) + +*/ +extern int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity) +{ + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); + + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} + +#define BUFREADCOMMENT (0x400) + +/* + Locate the Central directory of a zipfile (at the end, just before + the global comment) +*/ +extern uLong unzlocal_SearchCentralDir(FILE *fin) +{ + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (fseek(fin,0,SEEK_END) != 0) + return 0; + + + uSizeFile = ftell( fin ); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackRead<uMaxBack) + { + uLong uReadSize,uReadPos ; + int i; + if (uBackRead+BUFREADCOMMENT>uMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (fseek(fin,uReadPos,SEEK_SET)!=0) + break; + + if (fread(buf,(uInt)uReadSize,1,fin)!=1) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } + + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; +} + +extern unzFile unzReOpen (const char* path, unzFile file) +{ + unz_s *s; + FILE * fin; + + fin=fopen(path,"rb"); + if (fin==NULL) + return NULL; + + s=(unz_s*)ALLOC(sizeof(unz_s)); + Com_Memcpy(s, (unz_s*)file, sizeof(unz_s)); + + s->file = fin; + return (unzFile)s; +} + +/* + Open a Zip file. path contain the full pathname (by example, + on a Windows NT computer "c:\\test\\zlib109.zip" or on an Unix computer + "zlib/zlib109.zip". + If the zipfile cannot be opened (file don't exist or in not valid), the + return value is NULL. + Else, the return value is a unzFile Handle, usable with other function + of this unzip package. +*/ +extern unzFile unzOpen (const char* path) +{ + unz_s us; + unz_s *s; + uLong central_pos,uL; + FILE * fin ; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + fin=fopen(path,"rb"); + if (fin==NULL) + return NULL; + + central_pos = unzlocal_SearchCentralDir(fin); + if (central_pos==0) + err=UNZ_ERRNO; + + if (fseek(fin,central_pos,SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unzlocal_getLong(fin,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir */ + if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* zipfile comment length */ + if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((central_pos<us.offset_central_dir+us.size_central_dir) && + (err==UNZ_OK)) + err=UNZ_BADZIPFILE; + + if (err!=UNZ_OK) + { + fclose(fin); + return NULL; + } + + us.file=fin; + us.byte_before_the_zipfile = central_pos - + (us.offset_central_dir+us.size_central_dir); + us.central_pos = central_pos; + us.pfile_in_zip_read = NULL; + + + s=(unz_s*)ALLOC(sizeof(unz_s)); + *s=us; +// unzGoToFirstFile((unzFile)s); + return (unzFile)s; +} + + +/* + Close a ZipFile opened with unzipOpen. + If there is files inside the .Zip opened with unzipOpenCurrentFile (see later), + these files MUST be closed with unzipCloseCurrentFile before call unzipClose. + return UNZ_OK if there is no problem. */ +extern int unzClose (unzFile file) +{ + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + if (s->pfile_in_zip_read!=NULL) + unzCloseCurrentFile(file); + + fclose(s->file); + TRYFREE(s); + return UNZ_OK; +} + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. */ +extern int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info) +{ + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; +} + + +/* + Translate date/time from Dos format to tm_unz (readable more easilty) +*/ +static void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm) +{ + uLong uDate; + uDate = (uLong)(ulDosDate>>16); + ptm->tm_mday = (uInt)(uDate&0x1f) ; + ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; + ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; + + ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); + ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; + ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; +} + +/* + Get Info about the current file in the zipfile, with internal only info +*/ +static int unzlocal_GetCurrentFileInfoInternal (unzFile file, + unz_file_info *pfile_info, + unz_file_info_internal + *pfile_info_internal, + char *szFileName, + uLong fileNameBufferSize, + void *extraField, + uLong extraFieldBufferSize, + char *szComment, + uLong commentBufferSize) +{ + unz_s* s; + unz_file_info file_info; + unz_file_info_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (fseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) { + if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + } + if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; + + unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); + + if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename<fileNameBufferSize) + { + *(szFileName+file_info.size_filename)='\0'; + uSizeRead = file_info.size_filename; + } + else + uSizeRead = fileNameBufferSize; + + if ((file_info.size_filename>0) && (fileNameBufferSize>0)) + if (fread(szFileName,(uInt)uSizeRead,1,s->file)!=1) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + + if ((err==UNZ_OK) && (extraField!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_extra<extraFieldBufferSize) + uSizeRead = file_info.size_file_extra; + else + uSizeRead = extraFieldBufferSize; + + if (lSeek!=0) { + if (fseek(s->file,lSeek,SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) { + if (fread(extraField,(uInt)uSizeRead,1,s->file)!=1) + err=UNZ_ERRNO; + } + lSeek += file_info.size_file_extra - uSizeRead; + } + else + lSeek+=file_info.size_file_extra; + + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_comment<commentBufferSize) + { + *(szComment+file_info.size_file_comment)='\0'; + uSizeRead = file_info.size_file_comment; + } + else + uSizeRead = commentBufferSize; + + if (lSeek!=0) { + if (fseek(s->file,lSeek,SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) { + if (fread(szComment,(uInt)uSizeRead,1,s->file)!=1) + err=UNZ_ERRNO; + } + lSeek+=file_info.size_file_comment - uSizeRead; + } + else + lSeek+=file_info.size_file_comment; + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; +} + + + +/* + Write info about the ZipFile in the *pglobal_info structure. + No preparation of the structure is needed + return UNZ_OK if there is no problem. +*/ +extern int unzGetCurrentFileInfo ( unzFile file, unz_file_info *pfile_info, + char *szFileName, uLong fileNameBufferSize, + void *extraField, uLong extraFieldBufferSize, + char *szComment, uLong commentBufferSize) +{ + return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); +} + +/* + Set the current file of the zipfile to the first file. + return UNZ_OK if there is no problem +*/ +extern int unzGoToFirstFile (unzFile file) +{ + int err=UNZ_OK; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + + +/* + Set the current file of the zipfile to the next file. + return UNZ_OK if there is no problem + return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. +*/ +extern int unzGoToNextFile (unzFile file) +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; +} + +/* + Get the position of the info of the current file in the zip. + return UNZ_OK if there is no problem +*/ +extern int unzGetCurrentFileInfoPosition (unzFile file, unsigned long *pos ) +{ + unz_s* s; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + *pos = s->pos_in_central_dir; + return UNZ_OK; +} + +/* + Set the position of the info of the current file in the zip. + return UNZ_OK if there is no problem +*/ +extern int unzSetCurrentFileInfoPosition (unzFile file, unsigned long pos ) +{ + unz_s* s; + int err; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + s->pos_in_central_dir = pos; + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return UNZ_OK; +} + +/* + Try locate the file szFileName in the zipfile. + For the iCaseSensitivity signification, see unzipStringFileNameCompare + + return value : + UNZ_OK if the file is found. It becomes the current file. + UNZ_END_OF_LIST_OF_FILE if the file is not found +*/ +extern int unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity) +{ + unz_s* s; + int err; + + + uLong num_fileSaved; + uLong pos_in_central_dirSaved; + + + if (file==NULL) + return UNZ_PARAMERROR; + + if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) + return UNZ_PARAMERROR; + + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + + err = unzGoToFirstFile(file); + + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + unzGetCurrentFileInfo(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + return err; +} + + +/* + Read the static header of the current zipfile + Check the coherency of the static header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in static header + (filename and size of extra field data) +*/ +static int unzlocal_CheckCurrentFileCoherencyHeader (unz_s* s, uInt* piSizeVar, + uLong *poffset_local_extrafield, + uInt *psize_local_extrafield) +{ + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; + + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; + + if (fseek(s->file,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,SEEK_SET)!=0) + return UNZ_ERRNO; + + + if (err==UNZ_OK) { + if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + } + if (unzlocal_getShort(s->file,&uData) != UNZ_OK) + err=UNZ_ERRNO; +/* + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; +*/ + if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(s->file,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; + + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; + + + if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; + + *piSizeVar += (uInt)size_filename; + + if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; + + *piSizeVar += (uInt)size_extra_field; + + return err; +} + +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int unzOpenCurrentFile (unzFile file) +{ + int err=UNZ_OK; + int Store; + uInt iSizeVar; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uLong offset_local_extrafield; /* offset of the static extra field */ + uInt size_local_extrafield; /* size of the static extra field */ + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; + + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); + + if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, + &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; + + pfile_in_zip_read_info = (file_in_zip_read_info_s*) + ALLOC(sizeof(file_in_zip_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; + + pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + + if (pfile_in_zip_read_info->read_buffer==NULL) + { + TRYFREE(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } + + pfile_in_zip_read_info->stream_initialised=0; + + if ((s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; + Store = s->cur_file_info.compression_method==0; + + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->compression_method = + s->cur_file_info.compression_method; + pfile_in_zip_read_info->file=s->file; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; + + pfile_in_zip_read_info->stream.total_out = 0; + + if (!Store) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidp)0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=1; + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; + + + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; + + pfile_in_zip_read_info->stream.avail_in = (uInt)0; + + + s->pfile_in_zip_read = pfile_in_zip_read_info; + return UNZ_OK; +} + + +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. + + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int unzReadCurrentFile (unzFile file, void *buf, unsigned len) +{ + int err=UNZ_OK; + uInt iRead = 0; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + + if ((pfile_in_zip_read_info->read_buffer == NULL)) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; + + pfile_in_zip_read_info->stream.next_out = (Byte*)buf; + + pfile_in_zip_read_info->stream.avail_out = (uInt)len; + + if (len>pfile_in_zip_read_info->rest_read_uncompressed) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; + + while (pfile_in_zip_read_info->stream.avail_out>0) + { + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressed<uReadThis) + uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (s->cur_file_info.compressed_size == pfile_in_zip_read_info->rest_read_compressed) + if (fseek(pfile_in_zip_read_info->file, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) + return UNZ_ERRNO; + if (fread(pfile_in_zip_read_info->read_buffer,uReadThis,1, + pfile_in_zip_read_info->file)!=1) + return UNZ_ERRNO; + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; + + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; + + pfile_in_zip_read_info->stream.next_in = + (Byte*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if (pfile_in_zip_read_info->compression_method==0) + { + uInt uDoCopy,i ; + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;i<uDoCopy;i++) + *(pfile_in_zip_read_info->stream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + +// pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, +// pfile_in_zip_read_info->stream.next_out, +// uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; + } + else + { + uLong uTotalOutBefore,uTotalOutAfter; + const Byte *bufBefore; + uLong uOutThis; + int flush=Z_SYNC_FLUSH; + + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; + + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); + + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + +// pfile_in_zip_read_info->crc32 = +// crc32(pfile_in_zip_read_info->crc32,bufBefore, +// (uInt)(uOutThis)); + + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); + + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; +} + + +/* + Give the current position in uncompressed data +*/ +extern long unztell (unzFile file) +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + return (long)pfile_in_zip_read_info->stream.total_out; +} + + +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int unzeof (unzFile file) +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} + + + +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the static-header version of the extra field (sometimes, there is + more info in the static-header version than in the central-header) + + if buf==NULL, it return the size of the static extra field that can be read + + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int unzGetLocalExtrafield (unzFile file,void *buf,unsigned len) +{ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uInt read_now; + uLong size_to_read; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); + + if (buf==NULL) + return (int)size_to_read; + + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; + + if (read_now==0) + return 0; + + if (fseek(pfile_in_zip_read_info->file, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0) + return UNZ_ERRNO; + + if (fread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1) + return UNZ_ERRNO; + + return (int)read_now; +} + +/* + Close the file in zip opened with unzipOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int unzCloseCurrentFile (unzFile file) +{ + int err=UNZ_OK; + + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + +/* + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } +*/ + + TRYFREE(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised) + inflateEnd(&pfile_in_zip_read_info->stream); + + pfile_in_zip_read_info->stream_initialised = 0; + TRYFREE(pfile_in_zip_read_info); + + s->pfile_in_zip_read=NULL; + + return err; +} + + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf) +{ + unz_s* s; + uLong uReadThis ; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; + + if (fseek(s->file,s->central_pos+22,SEEK_SET)!=0) + return UNZ_ERRNO; + + if (uReadThis>0) + { + *szComment='\0'; + if (fread(szComment,(uInt)uReadThis,1,s->file)!=1) + return UNZ_ERRNO; + } + + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; +} + +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_blocks_state; +typedef struct inflate_blocks_state inflate_blocks_statef; + +static inflate_blocks_statef * inflate_blocks_new OF(( + z_streamp z, + check_func c, /* check function */ + uInt w)); /* window size */ + +static int inflate_blocks OF(( + inflate_blocks_statef *, + z_streamp , + int)); /* initial return code */ + +static void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_streamp , + uLong *)); /* check value on output */ + +static int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_streamp)); + +#if 0 +static void inflate_set_dictionary OF(( + inflate_blocks_statef *s, + const Byte *d, /* dictionary */ + uInt n)); /* dictionary length */ + +static int inflate_blocks_sync_point OF(( + inflate_blocks_statef *s)); +#endif + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* Table for deflate from PKZIP's appnote.txt. */ +static const uInt border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). */ + +typedef struct inflate_huft_s inflate_huft; + +struct inflate_huft_s { + union { + struct { + Byte Exop; /* number of extra bits or operation */ + Byte Bits; /* number of bits in this code or subcode */ + } what; + uInt pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit int's) */ + uInt base; /* literal, length base, distance base, + or table offset */ +}; + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1004 huft structures (850 for length/literals + and 154 for distances, the latter actually the result of an + exhaustive search). The actual maximum is not known, but the + value below is more than safe. */ +#define MANY 1440 + +static int inflate_trees_bits OF(( + uInt *, /* 19 code lengths */ + uInt *, /* bits tree desired/actual depth */ + inflate_huft * *, /* bits tree result */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ + +static int inflate_trees_dynamic OF(( + uInt, /* number of literal/length codes */ + uInt, /* number of distance codes */ + uInt *, /* that many (total) code lengths */ + uInt *, /* literal desired/actual bit depth */ + uInt *, /* distance desired/actual bit depth */ + inflate_huft * *, /* literal/length tree result */ + inflate_huft * *, /* distance tree result */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ + +static int inflate_trees_fixed OF(( + uInt *, /* literal desired/actual bit depth */ + uInt *, /* distance desired/actual bit depth */ + inflate_huft * *, /* literal/length tree result */ + inflate_huft * *, /* distance tree result */ + z_streamp)); /* for memory allocation */ + + +/* infcodes.h -- header to use infcodes.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_codes_state; +typedef struct inflate_codes_state inflate_codes_statef; + +static inflate_codes_statef *inflate_codes_new OF(( + uInt, uInt, + inflate_huft *, inflate_huft *, + z_streamp )); + +static int inflate_codes OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +static void inflate_codes_free OF(( + inflate_codes_statef *, + z_streamp )); + +/* infutil.h -- types and macros common to blocks and codes + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +#ifndef _INFUTIL_H +#define _INFUTIL_H + +typedef enum { + TYPE, /* get type bits (3, including end bit) */ + LENS, /* get lengths for stored */ + STORED, /* processing stored block */ + TABLE, /* get table lengths */ + BTREE, /* get bit lengths tree for a dynamic block */ + DTREE, /* get length, distance trees for a dynamic block */ + CODES, /* processing fixed or dynamic block */ + DRY, /* output remaining window bytes */ + DONE, /* finished last block, done */ + BAD} /* got a data error--stuck here */ +inflate_block_mode; + +/* inflate blocks semi-private state */ +struct inflate_blocks_state { + + /* mode */ + inflate_block_mode mode; /* current inflate_block mode */ + + /* mode dependent information */ + union { + uInt left; /* if STORED, bytes left to copy */ + struct { + uInt table; /* table lengths (14 bits) */ + uInt index; /* index into blens (or border) */ + uInt *blens; /* bit lengths of codes */ + uInt bb; /* bit length tree depth */ + inflate_huft *tb; /* bit length decoding tree */ + } trees; /* if DTREE, decoding info for trees */ + struct { + inflate_codes_statef + *codes; + } decode; /* if CODES, current state */ + } sub; /* submode */ + uInt last; /* true if this block is the last block */ + + /* mode independent information */ + uInt bitk; /* bits in bit buffer */ + uLong bitb; /* bit buffer */ + inflate_huft *hufts; /* single malloc for tree space */ + Byte *window; /* sliding window */ + Byte *end; /* one byte after sliding window */ + Byte *read; /* window read pointer */ + Byte *write; /* window write pointer */ + check_func checkfn; /* check function */ + uLong check; /* check on output */ + +}; + + +/* defines for inflate input/output */ +/* update pointers and return */ +#define UPDBITS {s->bitb=b;s->bitk=k;} +#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} +#define UPDOUT {s->write=q;} +#define UPDATE {UPDBITS UPDIN UPDOUT} +#define LEAVE {UPDATE return inflate_flush(s,z,r);} +/* get bytes and bits */ +#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} +#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} +#define NEXTBYTE (n--,*p++) +#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} +#define DUMPBITS(j) {b>>=(j);k-=(j);} +/* output bytes */ +#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q) +#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} +#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} +#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} +#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} +#define OUTBYTE(a) {*q++=(Byte)(a);m--;} +/* load static pointers */ +#define LOAD {LOADIN LOADOUT} + +/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ +static uInt inflate_mask[17]; + +/* copy as much as possible from the sliding window to the output area */ +static int inflate_flush OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +#endif + + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarily, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + + +void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c) +{ + if (c != Z_NULL) + *c = s->check; + if (s->mode == BTREE || s->mode == DTREE) + ZFREE(z, s->sub.trees.blens); + if (s->mode == CODES) + inflate_codes_free(s->sub.decode.codes, z); + s->mode = TYPE; + s->bitk = 0; + s->bitb = 0; + s->read = s->write = s->window; + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0); + Tracev(("inflate: blocks reset\n")); +} + + +inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w) +{ + inflate_blocks_statef *s; + + if ((s = (inflate_blocks_statef *)ZALLOC + (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) + return s; + if ((s->hufts = + (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) + { + ZFREE(z, s); + return Z_NULL; + } + if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL) + { + ZFREE(z, s->hufts); + ZFREE(z, s); + return Z_NULL; + } + s->end = s->window + w; + s->checkfn = c; + s->mode = TYPE; + Tracev(("inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, Z_NULL); + return s; +} + + +int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r) +{ + uInt t; /* temporary storage */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input based on current state */ + while (1) switch (s->mode) + { + case TYPE: + NEEDBITS(3) + t = (uInt)b & 7; + s->last = t & 1; + switch (t >> 1) + { + case 0: /* stored */ + Tracev(("inflate: stored block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + t = k & 7; /* go to byte boundary */ + DUMPBITS(t) + s->mode = LENS; /* get length of stored block */ + break; + case 1: /* fixed */ + Tracev(("inflate: fixed codes block%s\n", + s->last ? " (last)" : "")); + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_trees_fixed(&bl, &bd, &tl, &td, z); + s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); + if (s->sub.decode.codes == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + } + DUMPBITS(3) + s->mode = CODES; + break; + case 2: /* dynamic */ + Tracev(("inflate: dynamic codes block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + s->mode = TABLE; + break; + case 3: /* illegal */ + DUMPBITS(3) + s->mode = BAD; + z->msg = (char*)"invalid block type"; + r = Z_DATA_ERROR; + LEAVE + } + break; + case LENS: + NEEDBITS(32) + if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) + { + s->mode = BAD; + z->msg = (char*)"invalid stored block lengths"; + r = Z_DATA_ERROR; + LEAVE + } + s->sub.left = (uInt)b & 0xffff; + b = k = 0; /* dump bits */ + Tracev(("inflate: stored length %u\n", s->sub.left)); + s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); + break; + case STORED: + if (n == 0) + LEAVE + NEEDOUT + t = s->sub.left; + if (t > n) t = n; + if (t > m) t = m; + zmemcpy(q, p, t); + p += t; n -= t; + q += t; m -= t; + if ((s->sub.left -= t) != 0) + break; + Tracev(("inflate: stored end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + s->mode = s->last ? DRY : TYPE; + break; + case TABLE: + NEEDBITS(14) + s->sub.trees.table = t = (uInt)b & 0x3fff; +#ifndef PKZIP_BUG_WORKAROUND + if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) + { + s->mode = BAD; + z->msg = (char*)"too many length or distance symbols"; + r = Z_DATA_ERROR; + LEAVE + } +#endif + t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); + if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + DUMPBITS(14) + s->sub.trees.index = 0; + Tracev(("inflate: table sizes ok\n")); + s->mode = BTREE; + case BTREE: + while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) + { + NEEDBITS(3) + s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; + DUMPBITS(3) + } + while (s->sub.trees.index < 19) + s->sub.trees.blens[border[s->sub.trees.index++]] = 0; + s->sub.trees.bb = 7; + t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, + &s->sub.trees.tb, s->hufts, z); + if (t != Z_OK) + { + ZFREE(z, s->sub.trees.blens); + r = t; + if (r == Z_DATA_ERROR) + s->mode = BAD; + LEAVE + } + s->sub.trees.index = 0; + Tracev(("inflate: bits tree ok\n")); + s->mode = DTREE; + case DTREE: + while (t = s->sub.trees.table, + s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) + { + inflate_huft *h; + uInt i, j, c; + + t = s->sub.trees.bb; + NEEDBITS(t) + h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); + t = h->bits; + c = h->base; + if (c < 16) + { + DUMPBITS(t) + s->sub.trees.blens[s->sub.trees.index++] = c; + } + else /* c == 16..18 */ + { + i = c == 18 ? 7 : c - 14; + j = c == 18 ? 11 : 3; + NEEDBITS(t + i) + DUMPBITS(t) + j += (uInt)b & inflate_mask[i]; + DUMPBITS(i) + i = s->sub.trees.index; + t = s->sub.trees.table; + if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || + (c == 16 && i < 1)) + { + ZFREE(z, s->sub.trees.blens); + s->mode = BAD; + z->msg = (char*)"invalid bit length repeat"; + r = Z_DATA_ERROR; + LEAVE + } + c = c == 16 ? s->sub.trees.blens[i - 1] : 0; + do { + s->sub.trees.blens[i++] = c; + } while (--j); + s->sub.trees.index = i; + } + } + s->sub.trees.tb = Z_NULL; + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_codes_statef *c; + + tl = NULL; + td = NULL; + bl = 9; /* must be <= 9 for lookahead assumptions */ + bd = 6; /* must be <= 9 for lookahead assumptions */ + t = s->sub.trees.table; + t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), + s->sub.trees.blens, &bl, &bd, &tl, &td, + s->hufts, z); + ZFREE(z, s->sub.trees.blens); + if (t != Z_OK) + { + if (t == (uInt)Z_DATA_ERROR) + s->mode = BAD; + r = t; + LEAVE + } + Tracev(("inflate: trees ok\n")); + if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.decode.codes = c; + } + s->mode = CODES; + case CODES: + UPDATE + if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) + return inflate_flush(s, z, r); + r = Z_OK; + inflate_codes_free(s->sub.decode.codes, z); + LOAD + Tracev(("inflate: codes end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + if (!s->last) + { + s->mode = TYPE; + break; + } + s->mode = DRY; + case DRY: + FLUSH + if (s->read != s->write) + LEAVE + s->mode = DONE; + case DONE: + r = Z_STREAM_END; + LEAVE + case BAD: + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z) +{ + inflate_blocks_reset(s, z, Z_NULL); + ZFREE(z, s->window); + ZFREE(z, s->hufts); + ZFREE(z, s); + Tracev(("inflate: blocks freed\n")); + return Z_OK; +} + +#if 0 +void inflate_set_dictionary(inflate_blocks_statef *s, const Byte *d, uInt n) +{ + zmemcpy(s->window, d, n); + s->read = s->write = s->window + n; +} + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. + * IN assertion: s != Z_NULL + */ +int inflate_blocks_sync_point(inflate_blocks_statef *s) +{ + return s->mode == LENS; +} +#endif + + +/* And'ing with mask[n] masks the lower n bits */ +static uInt inflate_mask[17] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + + +/* copy as much as possible from the sliding window to the output area */ +int inflate_flush(inflate_blocks_statef *s, z_streamp z, int r) +{ + uInt n; + Byte *p; + Byte *q; + + /* static copies of source and destination pointers */ + p = z->next_out; + q = s->read; + + /* compute number of bytes to copy as as end of window */ + n = (uInt)((q <= s->write ? s->write : s->end) - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy as as end of window */ + zmemcpy(p, q, n); + p += n; + q += n; + + /* see if more to copy at beginning of window */ + if (q == s->end) + { + /* wrap pointers */ + q = s->window; + if (s->write == s->end) + s->write = s->window; + + /* compute bytes to copy */ + n = (uInt)(s->write - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy */ + zmemcpy(p, q, n); + p += n; + q += n; + } + + /* update pointers */ + z->next_out = p; + s->read = q; + + /* done */ + return r; +} + +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + + +static int huft_build OF(( + uInt *, /* code lengths in bits */ + uInt, /* number of codes */ + uInt, /* number of "simple" codes */ + const uInt *, /* list of base values for non-simple codes */ + const uInt *, /* list of extra bits for non-simple codes */ + inflate_huft **, /* result: starting table */ + uInt *, /* maximum lookup bits (returns actual) */ + inflate_huft *, /* space for trees */ + uInt *, /* hufts used in space */ + uInt * )); /* space for values */ + +/* Tables for deflate from PKZIP's appnote.txt. */ +static const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* see note #13 above about 258 */ +static const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ +static const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +static const uInt cpdext[30] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ +#define BMAX 15 /* maximum bit length of any code */ + +static int huft_build(uInt *b, uInt n, uInt s, const uInt *d, const uInt *e, inflate_huft ** t, uInt *m, inflate_huft *hp, uInt *hn, uInt *v) +//uInt *b; /* code lengths in bits (all assumed <= BMAX) */ +//uInt n; /* number of codes (assumed <= 288) */ +//uInt s; /* number of simple-valued codes (0..s-1) */ +//const uInt *d; /* list of base values for non-simple codes */ +//const uInt *e; /* list of extra bits for non-simple codes */ +//inflate_huft ** t; /* result: starting table */ +//uInt *m; /* maximum lookup bits, returns actual */ +//inflate_huft *hp; /* space for trees */ +//uInt *hn; /* hufts used in space */ +//uInt *v; /* working area: values in order of bit length */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR + if the given code set is incomplete (the tables are still built in this + case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of + lengths), or Z_MEM_ERROR if not enough memory. */ +{ + + uInt a; /* counter for codes of length k */ + uInt c[BMAX+1]; /* bit length count table */ + uInt f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register uInt i; /* counter, current code */ + register uInt j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */ + register uInt *p; /* pointer into c[], b[], or v[] */ + inflate_huft *q; /* points to current table */ + struct inflate_huft_s r = {{{0, 0}}}; /* table entry for structure assignment */ + inflate_huft *u[BMAX]; /* table stack */ + register int w; /* bits before this table == (l * h) */ + uInt x[BMAX+1]; /* bit offsets, then code stack */ + uInt *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + uInt z; /* number of entries in current table */ + + + /* Generate counts for each bit length */ + p = c; +#define C0 *p++ = 0; +#define C2 C0 C0 C0 C0 +#define C4 C2 C2 C2 C2 + C4 /* clear c[]--assume BMAX+1 is 16 */ + p = b; i = n; + do { + c[*p++]++; /* assume all entries <= BMAX */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (inflate_huft *)Z_NULL; + *m = 0; + return Z_OK; + } + + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((uInt)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((uInt)l > i) + l = i; + *m = l; + + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return Z_DATA_ERROR; + if ((y -= c[i]) < 0) + return Z_DATA_ERROR; + c[i] += y; + + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + n = x[g]; /* set n to length of v */ + + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ + q = (inflate_huft *)Z_NULL; /* ditto */ + z = 0; /* ditto */ + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { + a = c[k]; + while (a--) + { + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = g - w; + z = z > (uInt)l ? l : z; /* table size upper limit */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + if (j < z) + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } + z = 1 << j; /* table entries for j-bit table */ + + /* allocate new table */ + if (*hn + z > MANY) /* (note: doesn't matter for fixed) */ + return Z_MEM_ERROR; /* not enough memory */ + u[h] = q = hp + *hn; + *hn += z; + + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.bits = (Byte)l; /* bits to dump before this table */ + r.exop = (Byte)j; /* bits in this table */ + j = i >> (w - l); + r.base = (uInt)(q - u[h-1] - j); /* offset to this table */ + u[h-1][j] = r; /* connect to last table */ + } + else + *t = q; /* first table is returned result */ + } + + /* set up table entry in r */ + r.bits = (Byte)(k - w); + if (p >= v + n) + r.exop = 128 + 64; /* out of values--invalid code */ + else if (*p < s) + { + r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ + r.base = *p++; /* simple code is just the value */ + } + else + { + r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ + r.base = d[*p++ - s]; + } + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + mask = (1 << w) - 1; /* needed on HP, cc -O bug */ + while ((i & mask) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + mask = (1 << w) - 1; + } + } + } + + + /* Return Z_BUF_ERROR if we were given an incomplete table */ + return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; +} + + +int inflate_trees_bits(uInt *c, uInt *bb, inflate_huft * *tb, inflate_huft *hp, z_streamp z) +//uInt *c; /* 19 code lengths */ +//uInt *bb; /* bits tree desired/actual depth */ +//inflate_huft * *tb; /* bits tree result */ +//inflate_huft *hp; /* space for trees */ +//z_streamp z; /* for messages */ +{ + int r; + uInt hn = 0; /* hufts used in space */ + uInt *v; /* work area for huft_build */ + + if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL, + tb, bb, hp, &hn, v); + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed dynamic bit lengths tree"; + else if (r == Z_BUF_ERROR || *bb == 0) + { + z->msg = (char*)"incomplete dynamic bit lengths tree"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; +} + + +int inflate_trees_dynamic(uInt nl, uInt nd, uInt *c, uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, inflate_huft *hp, z_streamp z) +//uInt nl; /* number of literal/length codes */ +//uInt nd; /* number of distance codes */ +//uInt *c; /* that many (total) code lengths */ +//uInt *bl; /* literal desired/actual bit depth */ +//uInt *bd; /* distance desired/actual bit depth */ +//inflate_huft * *tl; /* literal/length tree result */ +//inflate_huft * *td; /* distance tree result */ +//inflate_huft *hp; /* space for trees */ +//z_streamp z; /* for messages */ +{ + int r; + uInt hn = 0; /* hufts used in space */ + uInt *v; /* work area for huft_build */ + + /* allocate work area */ + if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + + /* build literal/length tree */ + r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); + if (r != Z_OK || *bl == 0) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed literal/length tree"; + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; + } + + /* build distance tree */ + r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); + if (r != Z_OK || (*bd == 0 && nl > 257)) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed distance tree"; + else if (r == Z_BUF_ERROR) { +#ifdef PKZIP_BUG_WORKAROUND + r = Z_OK; + } +#else + z->msg = (char*)"incomplete distance tree"; + r = Z_DATA_ERROR; + } + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"empty distance tree with lengths"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; +#endif + } + + /* done */ + ZFREE(z, v); + return Z_OK; +} + +/* inffixed.h -- table for decoding fixed codes + * Generated automatically by the maketree.c program + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +static uInt fixed_bl = 9; +static uInt fixed_bd = 5; +static inflate_huft fixed_tl[] = { + {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, + {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192}, + {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160}, + {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224}, + {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144}, + {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208}, + {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176}, + {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240}, + {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, + {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200}, + {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168}, + {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232}, + {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152}, + {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216}, + {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184}, + {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248}, + {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, + {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196}, + {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164}, + {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228}, + {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148}, + {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212}, + {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180}, + {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244}, + {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204}, + {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172}, + {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236}, + {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156}, + {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220}, + {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188}, + {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252}, + {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, + {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194}, + {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162}, + {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226}, + {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146}, + {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210}, + {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178}, + {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242}, + {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, + {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202}, + {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170}, + {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234}, + {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154}, + {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218}, + {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186}, + {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250}, + {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, + {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198}, + {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166}, + {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230}, + {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150}, + {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214}, + {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182}, + {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246}, + {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206}, + {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174}, + {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238}, + {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158}, + {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222}, + {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190}, + {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254}, + {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, + {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193}, + {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161}, + {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225}, + {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145}, + {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209}, + {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177}, + {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241}, + {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, + {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201}, + {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169}, + {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233}, + {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153}, + {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217}, + {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185}, + {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249}, + {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, + {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197}, + {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165}, + {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229}, + {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149}, + {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213}, + {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181}, + {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245}, + {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205}, + {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173}, + {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237}, + {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157}, + {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221}, + {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189}, + {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253}, + {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, + {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195}, + {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163}, + {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227}, + {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147}, + {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211}, + {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179}, + {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243}, + {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, + {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203}, + {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171}, + {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235}, + {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155}, + {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219}, + {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187}, + {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251}, + {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, + {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199}, + {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167}, + {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231}, + {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151}, + {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215}, + {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183}, + {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247}, + {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207}, + {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175}, + {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239}, + {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159}, + {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223}, + {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191}, + {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255} + }; +static inflate_huft fixed_td[] = { + {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097}, + {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385}, + {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193}, + {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577}, + {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145}, + {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577}, + {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289}, + {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577} + }; + +int inflate_trees_fixed(uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, z_streamp z) +//uInt *bl; /* literal desired/actual bit depth */ +//uInt *bd; /* distance desired/actual bit depth */ +//inflate_huft * *tl; /* literal/length tree result */ +//inflate_huft * *td; /* distance tree result */ +//z_streamp z; /* for memory allocation */ +{ + *bl = fixed_bl; + *bd = fixed_bd; + *tl = fixed_tl; + *td = fixed_td; + return Z_OK; +} + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* macros for bit input with no checking and for returning unused bytes */ +#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} +#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;} + +/* Called with number of bytes left to write in window at least 258 + (the maximum string length) and number of input bytes available + at least ten. The ten bytes are six bytes for the longest length/ + distance pair plus four bytes for overloading the bit buffer. */ + +static int inflate_fast(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, inflate_blocks_statef *s, z_streamp z) +{ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + uInt ml; /* mask for literal/length tree */ + uInt md; /* mask for distance tree */ + uInt c; /* bytes to copy */ + uInt d; /* distance back to copy from */ + Byte *r; /* copy source pointer */ + + /* load input, output, bit values */ + LOAD + + /* initialize masks */ + ml = inflate_mask[bl]; + md = inflate_mask[bd]; + + /* do until not enough input or output space for fast loop */ + do { /* assume called with m >= 258 && n >= 10 */ + /* get literal/length code */ + GRABBITS(20) /* max bits for literal/length code */ + if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + continue; + } + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits for length */ + e &= 15; + c = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv(("inflate: * length %u\n", c)); + + /* decode distance base of block to copy */ + GRABBITS(15); /* max bits for distance code */ + e = (t = td + ((uInt)b & md))->exop; + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits to add to distance base */ + e &= 15; + GRABBITS(e) /* get extra bits (up to 13) */ + d = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv(("inflate: * distance %u\n", d)); + + /* do the copy */ + m -= c; + if ((uInt)(q - s->window) >= d) /* offset before dest */ + { /* just copy */ + r = q - d; + *q++ = *r++; c--; /* minimum count is three, */ + *q++ = *r++; c--; /* so unroll loop a little */ + } + else /* else offset after destination */ + { + e = d - (uInt)(q - s->window); /* bytes from offset to end */ + r = s->end - e; /* pointer to offset */ + if (c > e) /* if source crosses, */ + { + c -= e; /* copy to end of window */ + do { + *q++ = *r++; + } while (--e); + r = s->window; /* copy rest from start of window */ + } + } + do { /* copy all or what's left */ + *q++ = *r++; + } while (--c); + break; + } + else if ((e & 64) == 0) + { + t += t->base; + e = (t += ((uInt)b & inflate_mask[e]))->exop; + } + else + { + z->msg = (char*)"invalid distance code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + break; + } + if ((e & 64) == 0) + { + t += t->base; + if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + break; + } + } + else if (e & 32) + { + Tracevv(("inflate: * end of block\n")); + UNGRAB + UPDATE + return Z_STREAM_END; + } + else + { + z->msg = (char*)"invalid literal/length code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + } while (m >= 258 && n >= 10); + + /* not enough input or output--restore pointers and return */ + UNGRAB + UPDATE + return Z_OK; +} + +/* infcodes.c -- process literals and length/distance pairs + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + START, /* x: set up for LEN */ + LEN, /* i: get length/literal/eob next */ + LENEXT, /* i: getting length extra (have base) */ + DIST, /* i: get distance next */ + DISTEXT, /* i: getting distance extra */ + COPY, /* o: copying bytes in window, waiting for space */ + LIT, /* o: got literal, waiting for output space */ + WASH, /* o: got eob, possibly still output waiting */ + END, /* x: got eob and all data flushed */ + BADCODE} /* x: got error */ +inflate_codes_mode; + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + inflate_codes_mode mode; /* current inflate_codes mode */ + + /* mode dependent information */ + uInt len; + union { + struct { + inflate_huft *tree; /* pointer into tree */ + uInt need; /* bits needed */ + } code; /* if LEN or DIST, where in tree */ + uInt lit; /* if LIT, literal */ + struct { + uInt get; /* bits to get for extra */ + uInt dist; /* distance back to copy from */ + } copy; /* if EXT or COPY, where and how much */ + } sub; /* submode */ + + /* mode independent information */ + Byte lbits; /* ltree bits decoded per branch */ + Byte dbits; /* dtree bits decoder per branch */ + inflate_huft *ltree; /* literal/length/eob tree */ + inflate_huft *dtree; /* distance tree */ + +}; + + +inflate_codes_statef *inflate_codes_new(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, z_streamp z) +{ + inflate_codes_statef *c; + + if ((c = (inflate_codes_statef *) + ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) + { + c->mode = START; + c->lbits = (Byte)bl; + c->dbits = (Byte)bd; + c->ltree = tl; + c->dtree = td; + Tracev(("inflate: codes new\n")); + } + return c; +} + + +int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r) +{ + uInt j; /* temporary storage */ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Byte *p; /* input data pointer */ + uInt n; /* bytes available there */ + Byte *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + Byte *f; /* pointer to copy strings from */ + inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input and output based on current state */ + while (1) switch (c->mode) + { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + case START: /* x: set up for LEN */ +#ifndef SLOW + if (m >= 258 && n >= 10) + { + UPDATE + r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); + LOAD + if (r != Z_OK) + { + c->mode = r == Z_STREAM_END ? WASH : BADCODE; + break; + } + } +#endif /* !SLOW */ + c->sub.code.need = c->lbits; + c->sub.code.tree = c->ltree; + c->mode = LEN; + case LEN: /* i: get length/literal/eob next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e == 0) /* literal */ + { + c->sub.lit = t->base; + Tracevv((t->base >= 0x20 && t->base < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", t->base)); + c->mode = LIT; + break; + } + if (e & 16) /* length */ + { + c->sub.copy.get = e & 15; + c->len = t->base; + c->mode = LENEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t + t->base; + break; + } + if (e & 32) /* end of block */ + { + Tracevv(("inflate: end of block\n")); + c->mode = WASH; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid literal/length code"; + r = Z_DATA_ERROR; + LEAVE + case LENEXT: /* i: getting length extra (have base) */ + j = c->sub.copy.get; + NEEDBITS(j) + c->len += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + c->sub.code.need = c->dbits; + c->sub.code.tree = c->dtree; + Tracevv(("inflate: length %u\n", c->len)); + c->mode = DIST; + case DIST: /* i: get distance next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e & 16) /* distance */ + { + c->sub.copy.get = e & 15; + c->sub.copy.dist = t->base; + c->mode = DISTEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t + t->base; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid distance code"; + r = Z_DATA_ERROR; + LEAVE + case DISTEXT: /* i: getting distance extra */ + j = c->sub.copy.get; + NEEDBITS(j) + c->sub.copy.dist += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + Tracevv(("inflate: distance %u\n", c->sub.copy.dist)); + c->mode = COPY; + case COPY: /* o: copying bytes in window, waiting for space */ +#ifndef __TURBOC__ /* Turbo C bug for following expression */ + f = (uInt)(q - s->window) < c->sub.copy.dist ? + s->end - (c->sub.copy.dist - (q - s->window)) : + q - c->sub.copy.dist; +#else + f = q - c->sub.copy.dist; + if ((uInt)(q - s->window) < c->sub.copy.dist) + f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); +#endif + while (c->len) + { + NEEDOUT + OUTBYTE(*f++) + if (f == s->end) + f = s->window; + c->len--; + } + c->mode = START; + break; + case LIT: /* o: got literal, waiting for output space */ + NEEDOUT + OUTBYTE(c->sub.lit) + c->mode = START; + break; + case WASH: /* o: got eob, possibly more output */ + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } + FLUSH + if (s->read != s->write) + LEAVE + c->mode = END; + case END: + r = Z_STREAM_END; + LEAVE + case BADCODE: /* x: got error */ + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif +} + + +void inflate_codes_free(inflate_codes_statef *c, z_streamp z) +{ + ZFREE(z, c); + Tracev(("inflate: codes free\n")); +} + +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#define BASE 65521L /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#undef DO1 +#undef DO2 +#undef DO4 +#undef DO8 + +#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* ========================================================================= */ +static uLong adler32(uLong adler, const Byte *buf, uInt len) +{ + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int k; + + if (buf == Z_NULL) return 1L; + + while (len > 0) { + k = len < NMAX ? len : NMAX; + len -= k; + while (k >= 16) { + DO16(buf); + buf += 16; + k -= 16; + } + if (k != 0) do { + s1 += *buf++; + s2 += s1; + } while (--k); + s1 %= BASE; + s2 %= BASE; + } + return (s2 << 16) | s1; +} + + +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995-1998 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +static inflate_blocks_statef * inflate_blocks_new OF(( + z_streamp z, + check_func c, /* check function */ + uInt w)); /* window size */ + +static int inflate_blocks OF(( + inflate_blocks_statef *, + z_streamp , + int)); /* initial return code */ + +static void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_streamp , + uLong *)); /* check value on output */ + +static int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_streamp)); + +#if 0 +static void inflate_set_dictionary OF(( + inflate_blocks_statef *s, + const Byte *d, /* dictionary */ + uInt n)); /* dictionary length */ + +static int inflate_blocks_sync_point OF(( + inflate_blocks_statef *s)); +#endif + +typedef enum { + imMETHOD, /* waiting for method byte */ + imFLAG, /* waiting for flag byte */ + imDICT4, /* four dictionary check bytes to go */ + imDICT3, /* three dictionary check bytes to go */ + imDICT2, /* two dictionary check bytes to go */ + imDICT1, /* one dictionary check byte to go */ + imDICT0, /* waiting for inflateSetDictionary */ + imBLOCKS, /* decompressing blocks */ + imCHECK4, /* four check bytes to go */ + imCHECK3, /* three check bytes to go */ + imCHECK2, /* two check bytes to go */ + imCHECK1, /* one check byte to go */ + imDONE, /* finished check, done */ + imBAD} /* got an error--stay here */ +inflate_mode; + +/* inflate private state */ +struct internal_state { + + /* mode */ + inflate_mode mode; /* current inflate mode */ + + /* mode dependent information */ + union { + uInt method; /* if FLAGS, method byte */ + struct { + uLong was; /* computed check value */ + uLong need; /* stream check value */ + } check; /* if CHECK, check values to compare */ + uInt marker; /* if BAD, inflateSync's marker bytes count */ + } sub; /* submode */ + + /* mode independent information */ + int nowrap; /* flag for no wrapper */ + uInt wbits; /* log2(window size) (8..15, defaults to 15) */ + inflate_blocks_statef + *blocks; /* current inflate_blocks state */ + +}; + + +int inflateReset(z_streamp z) +{ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + z->total_in = z->total_out = 0; + z->msg = Z_NULL; + z->state->mode = z->state->nowrap ? imBLOCKS : imMETHOD; + inflate_blocks_reset(z->state->blocks, z, Z_NULL); + Tracev(("inflate: reset\n")); + return Z_OK; +} + + +int inflateEnd(z_streamp z) +{ + if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->blocks != Z_NULL) + inflate_blocks_free(z->state->blocks, z); + ZFREE(z, z->state); + z->state = Z_NULL; + Tracev(("inflate: end\n")); + return Z_OK; +} + + + +int inflateInit2_(z_streamp z, int w, const char *version, int stream_size) +{ + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != sizeof(z_stream)) + return Z_VERSION_ERROR; + + /* initialize state */ + if (z == Z_NULL) + return Z_STREAM_ERROR; + z->msg = Z_NULL; + if (z->zalloc == Z_NULL) + { + z->zalloc = (void *(*)(void *, unsigned, unsigned))zcalloc; + z->opaque = (voidp)0; + } + if (z->zfree == Z_NULL) z->zfree = (void (*)(void *, void *))zcfree; + if ((z->state = (struct internal_state *) + ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) + return Z_MEM_ERROR; + z->state->blocks = Z_NULL; + + /* handle undocumented nowrap option (no zlib header or check) */ + z->state->nowrap = 0; + if (w < 0) + { + w = - w; + z->state->nowrap = 1; + } + + /* set window size */ + if (w < 8 || w > 15) + { + inflateEnd(z); + return Z_STREAM_ERROR; + } + z->state->wbits = (uInt)w; + + /* create inflate_blocks state */ + if ((z->state->blocks = + inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) + == Z_NULL) + { + inflateEnd(z); + return Z_MEM_ERROR; + } + Tracev(("inflate: allocated\n")); + + /* reset state */ + inflateReset(z); + return Z_OK; +} + +#if 0 +int inflateInit_(z_streamp z, const char *version, int stream_size) +{ + return inflateInit2_(z, DEF_WBITS, version, stream_size); +} +#endif + +#define iNEEDBYTE {if(z->avail_in==0)return r;r=f;} +#define iNEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + +int inflate(z_streamp z, int f) +{ + int r; + uInt b; + + if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) + return Z_STREAM_ERROR; + f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; + r = Z_BUF_ERROR; + while (1) switch (z->state->mode) + { + case imMETHOD: + iNEEDBYTE + if (((z->state->sub.method = iNEXTBYTE) & 0xf) != Z_DEFLATED) + { + z->state->mode = imBAD; + z->msg = (char*)"unknown compression method"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if ((z->state->sub.method >> 4) + 8 > z->state->wbits) + { + z->state->mode = imBAD; + z->msg = (char*)"invalid window size"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + z->state->mode = imFLAG; + case imFLAG: + iNEEDBYTE + b = iNEXTBYTE; + if (((z->state->sub.method << 8) + b) % 31) + { + z->state->mode = imBAD; + z->msg = (char*)"incorrect header check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Tracev(("inflate: zlib header ok\n")); + if (!(b & PRESET_DICT)) + { + z->state->mode = imBLOCKS; + break; + } + z->state->mode = imDICT4; + case imDICT4: + iNEEDBYTE + z->state->sub.check.need = (uLong)iNEXTBYTE << 24; + z->state->mode = imDICT3; + case imDICT3: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 16; + z->state->mode = imDICT2; + case imDICT2: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 8; + z->state->mode = imDICT1; + case imDICT1: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE; + z->adler = z->state->sub.check.need; + z->state->mode = imDICT0; + return Z_NEED_DICT; + case imDICT0: + z->state->mode = imBAD; + z->msg = (char*)"need dictionary"; + z->state->sub.marker = 0; /* can try inflateSync */ + return Z_STREAM_ERROR; + case imBLOCKS: + r = inflate_blocks(z->state->blocks, z, r); + if (r == Z_DATA_ERROR) + { + z->state->mode = imBAD; + z->state->sub.marker = 0; /* can try inflateSync */ + break; + } + if (r == Z_OK) + r = f; + if (r != Z_STREAM_END) + return r; + r = f; + inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); + if (z->state->nowrap) + { + z->state->mode = imDONE; + break; + } + z->state->mode = imCHECK4; + case imCHECK4: + iNEEDBYTE + z->state->sub.check.need = (uLong)iNEXTBYTE << 24; + z->state->mode = imCHECK3; + case imCHECK3: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 16; + z->state->mode = imCHECK2; + case imCHECK2: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE << 8; + z->state->mode = imCHECK1; + case imCHECK1: + iNEEDBYTE + z->state->sub.check.need += (uLong)iNEXTBYTE; + + if (z->state->sub.check.was != z->state->sub.check.need) + { + z->state->mode = imBAD; + z->msg = (char*)"incorrect data check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Tracev(("inflate: zlib check ok\n")); + z->state->mode = imDONE; + case imDONE: + return Z_STREAM_END; + case imBAD: + return Z_DATA_ERROR; + default: + return Z_STREAM_ERROR; + } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif +} + +// defined but not used +#if 0 +int inflateSetDictionary(z_streamp z, const Byte *dictionary, uInt dictLength) +{ + uInt length = dictLength; + + if (z == Z_NULL || z->state == Z_NULL || z->state->mode != imDICT0) + return Z_STREAM_ERROR; + + if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; + z->adler = 1L; + + if (length >= ((uInt)1<<z->state->wbits)) + { + length = (1<<z->state->wbits)-1; + dictionary += dictLength - length; + } + inflate_set_dictionary(z->state->blocks, dictionary, length); + z->state->mode = imBLOCKS; + return Z_OK; +} + +int inflateSync(z_streamp z) +{ + uInt n; /* number of bytes to look at */ + Byte *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->mode != imBAD) + { + z->state->mode = imBAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + static const Byte mark[4] = {0, 0, 0xff, 0xff}; + if (*p == mark[m]) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = imBLOCKS; + return Z_OK; +} + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH + * but removes the length bytes of the resulting empty stored block. When + * decompressing, PPP checks that at the end of input packet, inflate is + * waiting for these length bytes. + */ +int inflateSyncPoint(z_streamp z) +{ + if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL) + return Z_STREAM_ERROR; + return inflate_blocks_sync_point(z->state->blocks); +} +#endif + +voidp zcalloc (voidp opaque, unsigned items, unsigned size) +{ + if (opaque) items += size - size; /* make compiler happy */ + return (voidp)Z_Malloc(items*size); +} + +void zcfree (voidp opaque, voidp ptr) +{ + Z_Free(ptr); + if (opaque) return; /* make compiler happy */ +} + + |