diff options
Diffstat (limited to 'src/libcurl/curl/multi.h')
| -rw-r--r-- | src/libcurl/curl/multi.h | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/src/libcurl/curl/multi.h b/src/libcurl/curl/multi.h new file mode 100644 index 0000000..05aeafc --- /dev/null +++ b/src/libcurl/curl/multi.h @@ -0,0 +1,344 @@ +#ifndef __CURL_MULTI_H +#define __CURL_MULTI_H +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2006, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * $Id: multi.h,v 1.38 2006-08-04 18:53:48 danf Exp $ + ***************************************************************************/ +/* + This is an "external" header file. Don't give away any internals here! + + GOALS + + o Enable a "pull" interface. The application that uses libcurl decides where + and when to ask libcurl to get/send data. + + o Enable multiple simultaneous transfers in the same thread without making it + complicated for the application. + + o Enable the application to select() on its own file descriptors and curl's + file descriptors simultaneous easily. + +*/ +#if defined(_WIN32) && !defined(WIN32) +/* Chris Lewis mentioned that he doesn't get WIN32 defined, only _WIN32 so we + make this adjustment to catch this. */ +#define WIN32 1 +#endif + +#if defined(WIN32) && !defined(_WIN32_WCE) && !defined(__GNUC__) && \ + !defined(__CYGWIN__) || defined(__MINGW32__) +#if !(defined(_WINSOCKAPI_) || defined(_WINSOCK_H)) +/* The check above prevents the winsock2 inclusion if winsock.h already was + included, since they can't co-exist without problems */ +#include <winsock2.h> +#endif +#else + +/* HP-UX systems version 9, 10 and 11 lack sys/select.h and so does oldish + libc5-based Linux systems. Only include it on system that are known to + require it! */ +#if defined(_AIX) || defined(NETWARE) || defined(__NetBSD__) || defined(_MINIX) +#include <sys/select.h> +#endif + +#ifndef _WIN32_WCE +#include <sys/socket.h> +#endif +#include <sys/time.h> +#include <sys/types.h> +#endif + +/* + * This header file should not really need to include "curl.h" since curl.h + * itself includes this file and we expect user applications to do #include + * <curl/curl.h> without the need for especially including multi.h. + * + * For some reason we added this include here at one point, and rather than to + * break existing (wrongly written) libcurl applications, we leave it as-is + * but with this warning attached. + */ +#include "curl.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef void CURLM; + +#ifndef curl_socket_typedef +/* Public socket typedef */ +#ifdef WIN32 +typedef SOCKET curl_socket_t; +#define CURL_SOCKET_BAD INVALID_SOCKET +#else +typedef int curl_socket_t; +#define CURL_SOCKET_BAD -1 +#endif +#define curl_socket_typedef +#endif /* curl_socket_typedef */ + +typedef enum { + CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() or + curl_multi_socket*() soon */ + CURLM_OK, + CURLM_BAD_HANDLE, /* the passed-in handle is not a valid CURLM handle */ + CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */ + CURLM_OUT_OF_MEMORY, /* if you ever get this, you're in deep sh*t */ + CURLM_INTERNAL_ERROR, /* this is a libcurl bug */ + CURLM_BAD_SOCKET, /* the passed in socket argument did not match */ + CURLM_UNKNOWN_OPTION, /* curl_multi_setopt() with unsupported option */ + CURLM_LAST +} CURLMcode; + +/* just to make code nicer when using curl_multi_socket() you can now check + for CURLM_CALL_MULTI_SOCKET too in the same style it works for + curl_multi_perform() and CURLM_CALL_MULTI_PERFORM */ +#define CURLM_CALL_MULTI_SOCKET CURLM_CALL_MULTI_PERFORM + +typedef enum { + CURLMSG_NONE, /* first, not used */ + CURLMSG_DONE, /* This easy handle has completed. 'result' contains + the CURLcode of the transfer */ + CURLMSG_LAST /* last, not used */ +} CURLMSG; + +struct CURLMsg { + CURLMSG msg; /* what this message means */ + CURL *easy_handle; /* the handle it concerns */ + union { + void *whatever; /* message-specific data */ + CURLcode result; /* return code for transfer */ + } data; +}; +typedef struct CURLMsg CURLMsg; + +/* + * Name: curl_multi_init() + * + * Desc: inititalize multi-style curl usage + * + * Returns: a new CURLM handle to use in all 'curl_multi' functions. + */ +CURL_EXTERN CURLM *curl_multi_init(void); + +/* + * Name: curl_multi_add_handle() + * + * Desc: add a standard curl handle to the multi stack + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_add_handle(CURLM *multi_handle, + CURL *curl_handle); + + /* + * Name: curl_multi_remove_handle() + * + * Desc: removes a curl handle from the multi stack again + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_remove_handle(CURLM *multi_handle, + CURL *curl_handle); + + /* + * Name: curl_multi_fdset() + * + * Desc: Ask curl for its fd_set sets. The app can use these to select() or + * poll() on. We want curl_multi_perform() called as soon as one of + * them are ready. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_fdset(CURLM *multi_handle, + fd_set *read_fd_set, + fd_set *write_fd_set, + fd_set *exc_fd_set, + int *max_fd); + + /* + * Name: curl_multi_perform() + * + * Desc: When the app thinks there's data available for curl it calls this + * function to read/write whatever there is right now. This returns + * as soon as the reads and writes are done. This function does not + * require that there actually is data available for reading or that + * data can be written, it can be called just in case. It returns + * the number of handles that still transfer data in the second + * argument's integer-pointer. + * + * Returns: CURLMcode type, general multi error code. *NOTE* that this only + * returns errors etc regarding the whole multi stack. There might + * still have occurred problems on invidual transfers even when this + * returns OK. + */ +CURL_EXTERN CURLMcode curl_multi_perform(CURLM *multi_handle, + int *running_handles); + + /* + * Name: curl_multi_cleanup() + * + * Desc: Cleans up and removes a whole multi stack. It does not free or + * touch any individual easy handles in any way. We need to define + * in what state those handles will be if this function is called + * in the middle of a transfer. + * + * Returns: CURLMcode type, general multi error code. + */ +CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle); + +/* + * Name: curl_multi_info_read() + * + * Desc: Ask the multi handle if there's any messages/informationals from + * the individual transfers. Messages include informationals such as + * error code from the transfer or just the fact that a transfer is + * completed. More details on these should be written down as well. + * + * Repeated calls to this function will return a new struct each + * time, until a special "end of msgs" struct is returned as a signal + * that there is no more to get at this point. + * + * The data the returned pointer points to will not survive calling + * curl_multi_cleanup(). + * + * The 'CURLMsg' struct is meant to be very simple and only contain + * very basic informations. If more involved information is wanted, + * we will provide the particular "transfer handle" in that struct + * and that should/could/would be used in subsequent + * curl_easy_getinfo() calls (or similar). The point being that we + * must never expose complex structs to applications, as then we'll + * undoubtably get backwards compatibility problems in the future. + * + * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out + * of structs. It also writes the number of messages left in the + * queue (after this read) in the integer the second argument points + * to. + */ +CURL_EXTERN CURLMsg *curl_multi_info_read(CURLM *multi_handle, + int *msgs_in_queue); + +/* + * Name: curl_multi_strerror() + * + * Desc: The curl_multi_strerror function may be used to turn a CURLMcode + * value into the equivalent human readable error string. This is + * useful for printing meaningful error messages. + * + * Returns: A pointer to a zero-terminated error message. + */ +CURL_EXTERN const char *curl_multi_strerror(CURLMcode); + +/* + * Name: curl_multi_socket() and + * curl_multi_socket_all() + * + * Desc: An alternative version of curl_multi_perform() that allows the + * application to pass in one of the file descriptors that have been + * detected to have "action" on them and let libcurl perform. + * See man page for details. + */ +#define CURL_POLL_NONE 0 +#define CURL_POLL_IN 1 +#define CURL_POLL_OUT 2 +#define CURL_POLL_INOUT 3 +#define CURL_POLL_REMOVE 4 + +#define CURL_SOCKET_TIMEOUT CURL_SOCKET_BAD + +typedef int (*curl_socket_callback)(CURL *easy, /* easy handle */ + curl_socket_t s, /* socket */ + int what, /* see above */ + void *userp, /* private callback + pointer */ + void *socketp); /* private socket + pointer */ + +CURL_EXTERN CURLMcode curl_multi_socket(CURLM *multi_handle, curl_socket_t s, + int *running_handles); + +CURL_EXTERN CURLMcode curl_multi_socket_all(CURLM *multi_handle, + int *running_handles); + +/* + * Name: curl_multi_timeout() + * + * Desc: Returns the maximum number of milliseconds the app is allowed to + * wait before curl_multi_socket() or curl_multi_perform() must be + * called (to allow libcurl's timed events to take place). + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_timeout(CURLM *multi_handle, + long *milliseconds); + +#undef CINIT /* re-using the same name as in curl.h */ + +#ifdef CURL_ISOCPP +#define CINIT(name,type,number) CURLMOPT_ ## name = CURLOPTTYPE_ ## type + number +#else +/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */ +#define LONG CURLOPTTYPE_LONG +#define OBJECTPOINT CURLOPTTYPE_OBJECTPOINT +#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT +#define OFF_T CURLOPTTYPE_OFF_T +#define CINIT(name,type,number) CURLMOPT_/**/name = type + number +#endif + +typedef enum { + /* This is the socket callback function pointer */ + CINIT(SOCKETFUNCTION, FUNCTIONPOINT, 1), + + /* This is the argument passed to the socket callback */ + CINIT(SOCKETDATA, OBJECTPOINT, 2), + + CURLMOPT_LASTENTRY /* the last unused */ +} CURLMoption; + + +/* + * Name: curl_multi_setopt() + * + * Desc: Sets options for the multi handle. + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle, + CURLMoption option, ...); + + +/* + * Name: curl_multi_assign() + * + * Desc: This function sets an association in the multi handle between the + * given socket and a private pointer of the application. This is + * (only) useful for curl_multi_socket uses. + * + * Returns: CURLM error code. + */ +CURL_EXTERN CURLMcode curl_multi_assign(CURLM *multi_handle, + curl_socket_t sockfd, void *sockp); + +#ifdef __cplusplus +} /* end of extern "C" */ +#endif + +#endif |