remove most libraries from the source tree

1 files changed, 0 insertions, 399 deletions

diff --git a/src/libcurl-7.35.0/curl/multi.h b/src/libcurl-7.35.0/curl/multi.h
deleted file mode 100644
index 3c4acb0f..00000000
--- a/src/libcurl-7.35.0/curl/multi.h
+++ /dev/null
@@ -1,399 +0,0 @@
-#ifndef __CURL_MULTI_H
-#define __CURL_MULTI_H
-/***************************************************************************
- *                                  _   _ ____  _
- *  Project                     ___| | | |  _ \| |
- *                             / __| | | | |_) | |
- *                            | (__| |_| |  _ <| |___
- *                             \___|\___/|_| \_\_____|
- *
- * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * This software is licensed as described in the file COPYING, which
- * you should have received as part of this distribution. The terms
- * are also available at http://curl.haxx.se/docs/copyright.html.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the COPYING file.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ***************************************************************************/
-/*
-  This is an "external" header file. Don't give away any internals here!
-
-  GOALS
-
-  o Enable a "pull" interface. The application that uses libcurl decides where
-    and when to ask libcurl to get/send data.
-
-  o Enable multiple simultaneous transfers in the same thread without making it
-    complicated for the application.
-
-  o Enable the application to select() on its own file descriptors and curl's
-    file descriptors simultaneous easily.
-
-*/
-
-/*
- * This header file should not really need to include "curl.h" since curl.h
- * itself includes this file and we expect user applications to do #include
- * <curl/curl.h> without the need for especially including multi.h.
- *
- * For some reason we added this include here at one point, and rather than to
- * break existing (wrongly written) libcurl applications, we leave it as-is
- * but with this warning attached.
- */
-#include "curl.h"
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef void CURLM;
-
-typedef enum {
-  CURLM_CALL_MULTI_PERFORM = -1, /* please call curl_multi_perform() or
-                                    curl_multi_socket*() soon */
-  CURLM_OK,
-  CURLM_BAD_HANDLE,      /* the passed-in handle is not a valid CURLM handle */
-  CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */
-  CURLM_OUT_OF_MEMORY,   /* if you ever get this, you're in deep sh*t */
-  CURLM_INTERNAL_ERROR,  /* this is a libcurl bug */
-  CURLM_BAD_SOCKET,      /* the passed in socket argument did not match */
-  CURLM_UNKNOWN_OPTION,  /* curl_multi_setopt() with unsupported option */
-  CURLM_ADDED_ALREADY,   /* an easy handle already added to a multi handle was
-                            attempted to get added - again */
-  CURLM_LAST
-} CURLMcode;
-
-/* just to make code nicer when using curl_multi_socket() you can now check
-   for CURLM_CALL_MULTI_SOCKET too in the same style it works for
-   curl_multi_perform() and CURLM_CALL_MULTI_PERFORM */
-#define CURLM_CALL_MULTI_SOCKET CURLM_CALL_MULTI_PERFORM
-
-typedef enum {
-  CURLMSG_NONE, /* first, not used */
-  CURLMSG_DONE, /* This easy handle has completed. 'result' contains
-                   the CURLcode of the transfer */
-  CURLMSG_LAST /* last, not used */
-} CURLMSG;
-
-struct CURLMsg {
-  CURLMSG msg;       /* what this message means */
-  CURL *easy_handle; /* the handle it concerns */
-  union {
-    void *whatever;    /* message-specific data */
-    CURLcode result;   /* return code for transfer */
-  } data;
-};
-typedef struct CURLMsg CURLMsg;
-
-/* Based on poll(2) structure and values.
- * We don't use pollfd and POLL* constants explicitly
- * to cover platforms without poll(). */
-#define CURL_WAIT_POLLIN    0x0001
-#define CURL_WAIT_POLLPRI   0x0002
-#define CURL_WAIT_POLLOUT   0x0004
-
-struct curl_waitfd {
-  curl_socket_t fd;
-  short events;
-  short revents; /* not supported yet */
-};
-
-/*
- * Name:    curl_multi_init()
- *
- * Desc:    inititalize multi-style curl usage
- *
- * Returns: a new CURLM handle to use in all 'curl_multi' functions.
- */
-CURL_EXTERN CURLM *curl_multi_init(void);
-
-/*
- * Name:    curl_multi_add_handle()
- *
- * Desc:    add a standard curl handle to the multi stack
- *
- * Returns: CURLMcode type, general multi error code.
- */
-CURL_EXTERN CURLMcode curl_multi_add_handle(CURLM *multi_handle,
-                                            CURL *curl_handle);
-
- /*
-  * Name:    curl_multi_remove_handle()
-  *
-  * Desc:    removes a curl handle from the multi stack again
-  *
-  * Returns: CURLMcode type, general multi error code.
-  */
-CURL_EXTERN CURLMcode curl_multi_remove_handle(CURLM *multi_handle,
-                                               CURL *curl_handle);
-
- /*
-  * Name:    curl_multi_fdset()
-  *
-  * Desc:    Ask curl for its fd_set sets. The app can use these to select() or
-  *          poll() on. We want curl_multi_perform() called as soon as one of
-  *          them are ready.
-  *
-  * Returns: CURLMcode type, general multi error code.
-  */
-CURL_EXTERN CURLMcode curl_multi_fdset(CURLM *multi_handle,
-                                       fd_set *read_fd_set,
-                                       fd_set *write_fd_set,
-                                       fd_set *exc_fd_set,
-                                       int *max_fd);
-
-/*
- * Name:     curl_multi_wait()
- *
- * Desc:     Poll on all fds within a CURLM set as well as any
- *           additional fds passed to the function.
- *
- * Returns:  CURLMcode type, general multi error code.
- */
-CURL_EXTERN CURLMcode curl_multi_wait(CURLM *multi_handle,
-                                      struct curl_waitfd extra_fds[],
-                                      unsigned int extra_nfds,
-                                      int timeout_ms,
-                                      int *ret);
-
- /*
-  * Name:    curl_multi_perform()
-  *
-  * Desc:    When the app thinks there's data available for curl it calls this
-  *          function to read/write whatever there is right now. This returns
-  *          as soon as the reads and writes are done. This function does not
-  *          require that there actually is data available for reading or that
-  *          data can be written, it can be called just in case. It returns
-  *          the number of handles that still transfer data in the second
-  *          argument's integer-pointer.
-  *
-  * Returns: CURLMcode type, general multi error code. *NOTE* that this only
-  *          returns errors etc regarding the whole multi stack. There might
-  *          still have occurred problems on invidual transfers even when this
-  *          returns OK.
-  */
-CURL_EXTERN CURLMcode curl_multi_perform(CURLM *multi_handle,
-                                         int *running_handles);
-
- /*
-  * Name:    curl_multi_cleanup()
-  *
-  * Desc:    Cleans up and removes a whole multi stack. It does not free or
-  *          touch any individual easy handles in any way. We need to define
-  *          in what state those handles will be if this function is called
-  *          in the middle of a transfer.
-  *
-  * Returns: CURLMcode type, general multi error code.
-  */
-CURL_EXTERN CURLMcode curl_multi_cleanup(CURLM *multi_handle);
-
-/*
- * Name:    curl_multi_info_read()
- *
- * Desc:    Ask the multi handle if there's any messages/informationals from
- *          the individual transfers. Messages include informationals such as
- *          error code from the transfer or just the fact that a transfer is
- *          completed. More details on these should be written down as well.
- *
- *          Repeated calls to this function will return a new struct each
- *          time, until a special "end of msgs" struct is returned as a signal
- *          that there is no more to get at this point.
- *
- *          The data the returned pointer points to will not survive calling
- *          curl_multi_cleanup().
- *
- *          The 'CURLMsg' struct is meant to be very simple and only contain
- *          very basic informations. If more involved information is wanted,
- *          we will provide the particular "transfer handle" in that struct
- *          and that should/could/would be used in subsequent
- *          curl_easy_getinfo() calls (or similar). The point being that we
- *          must never expose complex structs to applications, as then we'll
- *          undoubtably get backwards compatibility problems in the future.
- *
- * Returns: A pointer to a filled-in struct, or NULL if it failed or ran out
- *          of structs. It also writes the number of messages left in the
- *          queue (after this read) in the integer the second argument points
- *          to.
- */
-CURL_EXTERN CURLMsg *curl_multi_info_read(CURLM *multi_handle,
-                                          int *msgs_in_queue);
-
-/*
- * Name:    curl_multi_strerror()
- *
- * Desc:    The curl_multi_strerror function may be used to turn a CURLMcode
- *          value into the equivalent human readable error string.  This is
- *          useful for printing meaningful error messages.
- *
- * Returns: A pointer to a zero-terminated error message.
- */
-CURL_EXTERN const char *curl_multi_strerror(CURLMcode);
-
-/*
- * Name:    curl_multi_socket() and
- *          curl_multi_socket_all()
- *
- * Desc:    An alternative version of curl_multi_perform() that allows the
- *          application to pass in one of the file descriptors that have been
- *          detected to have "action" on them and let libcurl perform.
- *          See man page for details.
- */
-#define CURL_POLL_NONE   0
-#define CURL_POLL_IN     1
-#define CURL_POLL_OUT    2
-#define CURL_POLL_INOUT  3
-#define CURL_POLL_REMOVE 4
-
-#define CURL_SOCKET_TIMEOUT CURL_SOCKET_BAD
-
-#define CURL_CSELECT_IN   0x01
-#define CURL_CSELECT_OUT  0x02
-#define CURL_CSELECT_ERR  0x04
-
-typedef int (*curl_socket_callback)(CURL *easy,      /* easy handle */
-                                    curl_socket_t s, /* socket */
-                                    int what,        /* see above */
-                                    void *userp,     /* private callback
-                                                        pointer */
-                                    void *socketp);  /* private socket
-                                                        pointer */
-/*
- * Name:    curl_multi_timer_callback
- *
- * Desc:    Called by libcurl whenever the library detects a change in the
- *          maximum number of milliseconds the app is allowed to wait before
- *          curl_multi_socket() or curl_multi_perform() must be called
- *          (to allow libcurl's timed events to take place).
- *
- * Returns: The callback should return zero.
- */
-typedef int (*curl_multi_timer_callback)(CURLM *multi,    /* multi handle */
-                                         long timeout_ms, /* see above */
-                                         void *userp);    /* private callback
-                                                             pointer */
-
-CURL_EXTERN CURLMcode curl_multi_socket(CURLM *multi_handle, curl_socket_t s,
-                                        int *running_handles);
-
-CURL_EXTERN CURLMcode curl_multi_socket_action(CURLM *multi_handle,
-                                               curl_socket_t s,
-                                               int ev_bitmask,
-                                               int *running_handles);
-
-CURL_EXTERN CURLMcode curl_multi_socket_all(CURLM *multi_handle,
-                                            int *running_handles);
-
-#ifndef CURL_ALLOW_OLD_MULTI_SOCKET
-/* This macro below was added in 7.16.3 to push users who recompile to use
-   the new curl_multi_socket_action() instead of the old curl_multi_socket()
-*/
-#define curl_multi_socket(x,y,z) curl_multi_socket_action(x,y,0,z)
-#endif
-
-/*
- * Name:    curl_multi_timeout()
- *
- * Desc:    Returns the maximum number of milliseconds the app is allowed to
- *          wait before curl_multi_socket() or curl_multi_perform() must be
- *          called (to allow libcurl's timed events to take place).
- *
- * Returns: CURLM error code.
- */
-CURL_EXTERN CURLMcode curl_multi_timeout(CURLM *multi_handle,
-                                         long *milliseconds);
-
-#undef CINIT /* re-using the same name as in curl.h */
-
-#ifdef CURL_ISOCPP
-#define CINIT(name,type,num) CURLMOPT_ ## name = CURLOPTTYPE_ ## type + num
-#else
-/* The macro "##" is ISO C, we assume pre-ISO C doesn't support it. */
-#define LONG          CURLOPTTYPE_LONG
-#define OBJECTPOINT   CURLOPTTYPE_OBJECTPOINT
-#define FUNCTIONPOINT CURLOPTTYPE_FUNCTIONPOINT
-#define OFF_T         CURLOPTTYPE_OFF_T
-#define CINIT(name,type,number) CURLMOPT_/**/name = type + number
-#endif
-
-typedef enum {
-  /* This is the socket callback function pointer */
-  CINIT(SOCKETFUNCTION, FUNCTIONPOINT, 1),
-
-  /* This is the argument passed to the socket callback */
-  CINIT(SOCKETDATA, OBJECTPOINT, 2),
-
-    /* set to 1 to enable pipelining for this multi handle */
-  CINIT(PIPELINING, LONG, 3),
-
-   /* This is the timer callback function pointer */
-  CINIT(TIMERFUNCTION, FUNCTIONPOINT, 4),
-
-  /* This is the argument passed to the timer callback */
-  CINIT(TIMERDATA, OBJECTPOINT, 5),
-
-  /* maximum number of entries in the connection cache */
-  CINIT(MAXCONNECTS, LONG, 6),
-
-  /* maximum number of (pipelining) connections to one host */
-  CINIT(MAX_HOST_CONNECTIONS, LONG, 7),
-
-  /* maximum number of requests in a pipeline */
-  CINIT(MAX_PIPELINE_LENGTH, LONG, 8),
-
-  /* a connection with a content-length longer than this
-     will not be considered for pipelining */
-  CINIT(CONTENT_LENGTH_PENALTY_SIZE, OFF_T, 9),
-
-  /* a connection with a chunk length longer than this
-     will not be considered for pipelining */
-  CINIT(CHUNK_LENGTH_PENALTY_SIZE, OFF_T, 10),
-
-  /* a list of site names(+port) that are blacklisted from
-     pipelining */
-  CINIT(PIPELINING_SITE_BL, OBJECTPOINT, 11),
-
-  /* a list of server types that are blacklisted from
-     pipelining */
-  CINIT(PIPELINING_SERVER_BL, OBJECTPOINT, 12),
-
-  /* maximum number of open connections in total */
-  CINIT(MAX_TOTAL_CONNECTIONS, LONG, 13),
-
-  CURLMOPT_LASTENTRY /* the last unused */
-} CURLMoption;
-
-
-/*
- * Name:    curl_multi_setopt()
- *
- * Desc:    Sets options for the multi handle.
- *
- * Returns: CURLM error code.
- */
-CURL_EXTERN CURLMcode curl_multi_setopt(CURLM *multi_handle,
-                                        CURLMoption option, ...);
-
-
-/*
- * Name:    curl_multi_assign()
- *
- * Desc:    This function sets an association in the multi handle between the
- *          given socket and a private pointer of the application. This is
- *          (only) useful for curl_multi_socket uses.
- *
- * Returns: CURLM error code.
- */
-CURL_EXTERN CURLMcode curl_multi_assign(CURLM *multi_handle,
-                                        curl_socket_t sockfd, void *sockp);
-
-#ifdef __cplusplus
-} /* end of extern "C" */
-#endif
-
-#endif