remove most libraries from the source tree

12 files changed, 0 insertions, 1979 deletions

diff --git a/src/libspeex/include/speex/speex.h b/src/libspeex/include/speex/speex.h
deleted file mode 100644
index 82ba0162..00000000
--- a/src/libspeex/include/speex/speex.h
+++ /dev/null
@@ -1,424 +0,0 @@
-/* Copyright (C) 2002-2006 Jean-Marc Valin*/
-/**
-  @file speex.h
-  @brief Describes the different modes of the codec
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef SPEEX_H
-#define SPEEX_H
-/** @defgroup Codec Speex encoder and decoder
- *  This is the Speex codec itself.
- *  @{
- */
-
-#include "speex/speex_bits.h"
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Values allowed for *ctl() requests */
-
-/** Set enhancement on/off (decoder only) */
-#define SPEEX_SET_ENH 0
-/** Get enhancement state (decoder only) */
-#define SPEEX_GET_ENH 1
-
-/*Would be SPEEX_SET_FRAME_SIZE, but it's (currently) invalid*/
-/** Obtain frame size used by encoder/decoder */
-#define SPEEX_GET_FRAME_SIZE 3
-
-/** Set quality value */
-#define SPEEX_SET_QUALITY 4
-/** Get current quality setting */
-/* #define SPEEX_GET_QUALITY 5 -- Doesn't make much sense, does it? */
-
-/** Set sub-mode to use */
-#define SPEEX_SET_MODE 6
-/** Get current sub-mode in use */
-#define SPEEX_GET_MODE 7
-
-/** Set low-band sub-mode to use (wideband only)*/
-#define SPEEX_SET_LOW_MODE 8
-/** Get current low-band mode in use (wideband only)*/
-#define SPEEX_GET_LOW_MODE 9
-
-/** Set high-band sub-mode to use (wideband only)*/
-#define SPEEX_SET_HIGH_MODE 10
-/** Get current high-band mode in use (wideband only)*/
-#define SPEEX_GET_HIGH_MODE 11
-
-/** Set VBR on (1) or off (0) */
-#define SPEEX_SET_VBR 12
-/** Get VBR status (1 for on, 0 for off) */
-#define SPEEX_GET_VBR 13
-
-/** Set quality value for VBR encoding (0-10) */
-#define SPEEX_SET_VBR_QUALITY 14
-/** Get current quality value for VBR encoding (0-10) */
-#define SPEEX_GET_VBR_QUALITY 15
-
-/** Set complexity of the encoder (0-10) */
-#define SPEEX_SET_COMPLEXITY 16
-/** Get current complexity of the encoder (0-10) */
-#define SPEEX_GET_COMPLEXITY 17
-
-/** Set bit-rate used by the encoder (or lower) */
-#define SPEEX_SET_BITRATE 18
-/** Get current bit-rate used by the encoder or decoder */
-#define SPEEX_GET_BITRATE 19
-
-/** Define a handler function for in-band Speex request*/
-#define SPEEX_SET_HANDLER 20
-
-/** Define a handler function for in-band user-defined request*/
-#define SPEEX_SET_USER_HANDLER 22
-
-/** Set sampling rate used in bit-rate computation */
-#define SPEEX_SET_SAMPLING_RATE 24
-/** Get sampling rate used in bit-rate computation */
-#define SPEEX_GET_SAMPLING_RATE 25
-
-/** Reset the encoder/decoder memories to zero*/
-#define SPEEX_RESET_STATE 26
-
-/** Get VBR info (mostly used internally) */
-#define SPEEX_GET_RELATIVE_QUALITY 29
-
-/** Set VAD status (1 for on, 0 for off) */
-#define SPEEX_SET_VAD 30
-
-/** Get VAD status (1 for on, 0 for off) */
-#define SPEEX_GET_VAD 31
-
-/** Set Average Bit-Rate (ABR) to n bits per seconds */
-#define SPEEX_SET_ABR 32
-/** Get Average Bit-Rate (ABR) setting (in bps) */
-#define SPEEX_GET_ABR 33
-
-/** Set DTX status (1 for on, 0 for off) */
-#define SPEEX_SET_DTX 34
-/** Get DTX status (1 for on, 0 for off) */
-#define SPEEX_GET_DTX 35
-
-/** Set submode encoding in each frame (1 for yes, 0 for no, setting to no breaks the standard) */
-#define SPEEX_SET_SUBMODE_ENCODING 36
-/** Get submode encoding in each frame */
-#define SPEEX_GET_SUBMODE_ENCODING 37
-
-/*#define SPEEX_SET_LOOKAHEAD 38*/
-/** Returns the lookahead used by Speex */
-#define SPEEX_GET_LOOKAHEAD 39
-
-/** Sets tuning for packet-loss concealment (expected loss rate) */
-#define SPEEX_SET_PLC_TUNING 40
-/** Gets tuning for PLC */
-#define SPEEX_GET_PLC_TUNING 41
-
-/** Sets the max bit-rate allowed in VBR mode */
-#define SPEEX_SET_VBR_MAX_BITRATE 42
-/** Gets the max bit-rate allowed in VBR mode */
-#define SPEEX_GET_VBR_MAX_BITRATE 43
-
-/** Turn on/off input/output high-pass filtering */
-#define SPEEX_SET_HIGHPASS 44
-/** Get status of input/output high-pass filtering */
-#define SPEEX_GET_HIGHPASS 45
-
-/** Get "activity level" of the last decoded frame, i.e.
-    how much damage we cause if we remove the frame */
-#define SPEEX_GET_ACTIVITY 47
-
-
-/* Preserving compatibility:*/
-/** Equivalent to SPEEX_SET_ENH */
-#define SPEEX_SET_PF 0
-/** Equivalent to SPEEX_GET_ENH */
-#define SPEEX_GET_PF 1
-
-
-
-
-/* Values allowed for mode queries */
-/** Query the frame size of a mode */
-#define SPEEX_MODE_FRAME_SIZE 0
-
-/** Query the size of an encoded frame for a particular sub-mode */
-#define SPEEX_SUBMODE_BITS_PER_FRAME 1
-
-
-
-/** Get major Speex version */
-#define SPEEX_LIB_GET_MAJOR_VERSION 1
-/** Get minor Speex version */
-#define SPEEX_LIB_GET_MINOR_VERSION 3
-/** Get micro Speex version */
-#define SPEEX_LIB_GET_MICRO_VERSION 5
-/** Get extra Speex version */
-#define SPEEX_LIB_GET_EXTRA_VERSION 7
-/** Get Speex version string */
-#define SPEEX_LIB_GET_VERSION_STRING 9
-
-/*#define SPEEX_LIB_SET_ALLOC_FUNC 10
-#define SPEEX_LIB_GET_ALLOC_FUNC 11
-#define SPEEX_LIB_SET_FREE_FUNC 12
-#define SPEEX_LIB_GET_FREE_FUNC 13
-
-#define SPEEX_LIB_SET_WARNING_FUNC 14
-#define SPEEX_LIB_GET_WARNING_FUNC 15
-#define SPEEX_LIB_SET_ERROR_FUNC 16
-#define SPEEX_LIB_GET_ERROR_FUNC 17
-*/
-
-/** Number of defined modes in Speex */
-#define SPEEX_NB_MODES 3
-
-/** modeID for the defined narrowband mode */
-#define SPEEX_MODEID_NB 0
-
-/** modeID for the defined wideband mode */
-#define SPEEX_MODEID_WB 1
-
-/** modeID for the defined ultra-wideband mode */
-#define SPEEX_MODEID_UWB 2
-
-struct SpeexMode;
-
-
-/* Prototypes for mode function pointers */
-
-/** Encoder state initialization function */
-typedef void *(*encoder_init_func)(const struct SpeexMode *mode);
-
-/** Encoder state destruction function */
-typedef void (*encoder_destroy_func)(void *st);
-
-/** Main encoding function */
-typedef int (*encode_func)(void *state, void *in, SpeexBits *bits);
-
-/** Function for controlling the encoder options */
-typedef int (*encoder_ctl_func)(void *state, int request, void *ptr);
-
-/** Decoder state initialization function */
-typedef void *(*decoder_init_func)(const struct SpeexMode *mode);
-
-/** Decoder state destruction function */
-typedef void (*decoder_destroy_func)(void *st);
-
-/** Main decoding function */
-typedef int  (*decode_func)(void *state, SpeexBits *bits, void *out);
-
-/** Function for controlling the decoder options */
-typedef int (*decoder_ctl_func)(void *state, int request, void *ptr);
-
-
-/** Query function for a mode */
-typedef int (*mode_query_func)(const void *mode, int request, void *ptr);
-
-/** Struct defining a Speex mode */ 
-typedef struct SpeexMode {
-   /** Pointer to the low-level mode data */
-   const void *mode;
-
-   /** Pointer to the mode query function */
-   mode_query_func query;
-   
-   /** The name of the mode (you should not rely on this to identify the mode)*/
-   const char *modeName;
-
-   /**ID of the mode*/
-   int modeID;
-
-   /**Version number of the bitstream (incremented every time we break
-    bitstream compatibility*/
-   int bitstream_version;
-
-   /** Pointer to encoder initialization function */
-   encoder_init_func enc_init;
-
-   /** Pointer to encoder destruction function */
-   encoder_destroy_func enc_destroy;
-
-   /** Pointer to frame encoding function */
-   encode_func enc;
-
-   /** Pointer to decoder initialization function */
-   decoder_init_func dec_init;
-
-   /** Pointer to decoder destruction function */
-   decoder_destroy_func dec_destroy;
-
-   /** Pointer to frame decoding function */
-   decode_func dec;
-
-   /** ioctl-like requests for encoder */
-   encoder_ctl_func enc_ctl;
-
-   /** ioctl-like requests for decoder */
-   decoder_ctl_func dec_ctl;
-
-} SpeexMode;
-
-/**
- * Returns a handle to a newly created Speex encoder state structure. For now, 
- * the "mode" argument can be &nb_mode or &wb_mode . In the future, more modes 
- * may be added. Note that for now if you have more than one channels to 
- * encode, you need one state per channel.
- *
- * @param mode The mode to use (either speex_nb_mode or speex_wb.mode) 
- * @return A newly created encoder state or NULL if state allocation fails
- */
-void *speex_encoder_init(const SpeexMode *mode);
-
-/** Frees all resources associated to an existing Speex encoder state. 
- * @param state Encoder state to be destroyed */
-void speex_encoder_destroy(void *state);
-
-/** Uses an existing encoder state to encode one frame of speech pointed to by
-    "in". The encoded bit-stream is saved in "bits".
- @param state Encoder state
- @param in Frame that will be encoded with a +-2^15 range. This data MAY be 
-        overwritten by the encoder and should be considered uninitialised 
-        after the call.
- @param bits Bit-stream where the data will be written
- @return 0 if frame needs not be transmitted (DTX only), 1 otherwise
- */
-int speex_encode(void *state, float *in, SpeexBits *bits);
-
-/** Uses an existing encoder state to encode one frame of speech pointed to by
-    "in". The encoded bit-stream is saved in "bits".
- @param state Encoder state
- @param in Frame that will be encoded with a +-2^15 range
- @param bits Bit-stream where the data will be written
- @return 0 if frame needs not be transmitted (DTX only), 1 otherwise
- */
-int speex_encode_int(void *state, spx_int16_t *in, SpeexBits *bits);
-
-/** Used like the ioctl function to control the encoder parameters
- *
- * @param state Encoder state
- * @param request ioctl-type request (one of the SPEEX_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter
- */
-int speex_encoder_ctl(void *state, int request, void *ptr);
-
-
-/** Returns a handle to a newly created decoder state structure. For now, 
- * the mode argument can be &nb_mode or &wb_mode . In the future, more modes
- * may be added.  Note that for now if you have more than one channels to
- * decode, you need one state per channel.
- *
- * @param mode Speex mode (one of speex_nb_mode or speex_wb_mode)
- * @return A newly created decoder state or NULL if state allocation fails
- */ 
-void *speex_decoder_init(const SpeexMode *mode);
-
-/** Frees all resources associated to an existing decoder state.
- *
- * @param state State to be destroyed
- */
-void speex_decoder_destroy(void *state);
-
-/** Uses an existing decoder state to decode one frame of speech from
- * bit-stream bits. The output speech is saved written to out.
- *
- * @param state Decoder state
- * @param bits Bit-stream from which to decode the frame (NULL if the packet was lost)
- * @param out Where to write the decoded frame
- * @return return status (0 for no error, -1 for end of stream, -2 corrupt stream)
- */
-int speex_decode(void *state, SpeexBits *bits, float *out);
-
-/** Uses an existing decoder state to decode one frame of speech from
- * bit-stream bits. The output speech is saved written to out.
- *
- * @param state Decoder state
- * @param bits Bit-stream from which to decode the frame (NULL if the packet was lost)
- * @param out Where to write the decoded frame
- * @return return status (0 for no error, -1 for end of stream, -2 corrupt stream)
- */
-int speex_decode_int(void *state, SpeexBits *bits, spx_int16_t *out);
-
-/** Used like the ioctl function to control the encoder parameters
- *
- * @param state Decoder state
- * @param request ioctl-type request (one of the SPEEX_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter
- */
-int speex_decoder_ctl(void *state, int request, void *ptr);
-
-
-/** Query function for mode information
- *
- * @param mode Speex mode
- * @param request ioctl-type request (one of the SPEEX_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter
- */
-int speex_mode_query(const SpeexMode *mode, int request, void *ptr);
-
-/** Functions for controlling the behavior of libspeex
- * @param request ioctl-type request (one of the SPEEX_LIB_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown, -2 for invalid parameter
- */
-int speex_lib_ctl(int request, void *ptr);
-
-/** Default narrowband mode */
-extern const SpeexMode speex_nb_mode;
-
-/** Default wideband mode */
-extern const SpeexMode speex_wb_mode;
-
-/** Default "ultra-wideband" mode */
-extern const SpeexMode speex_uwb_mode;
-
-/** List of all modes available */
-extern const SpeexMode * const speex_mode_list[SPEEX_NB_MODES];
-
-/** Obtain one of the modes available */
-const SpeexMode * speex_lib_get_mode (int mode);
-
-#ifndef WIN32
-/* We actually override the function in the narrowband case so that we can avoid linking in the wideband stuff */
-#define speex_lib_get_mode(mode) ((mode)==SPEEX_MODEID_NB ? &speex_nb_mode : speex_lib_get_mode (mode))
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @}*/
-#endif
diff --git a/src/libspeex/include/speex/speex_bits.h b/src/libspeex/include/speex/speex_bits.h
deleted file mode 100644
index a26fb4ce..00000000
--- a/src/libspeex/include/speex/speex_bits.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin */
-/**
-   @file speex_bits.h
-   @brief Handles bit packing/unpacking
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef BITS_H
-#define BITS_H
-/** @defgroup SpeexBits SpeexBits: Bit-stream manipulations
- *  This is the structure that holds the bit-stream when encoding or decoding
- * with Speex. It allows some manipulations as well.
- *  @{
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Bit-packing data structure representing (part of) a bit-stream. */
-typedef struct SpeexBits {
-   char *chars;   /**< "raw" data */
-   int   nbBits;  /**< Total number of bits stored in the stream*/
-   int   charPtr; /**< Position of the byte "cursor" */
-   int   bitPtr;  /**< Position of the bit "cursor" within the current char */
-   int   owner;   /**< Does the struct "own" the "raw" buffer (member "chars") */
-   int   overflow;/**< Set to one if we try to read past the valid data */
-   int   buf_size;/**< Allocated size for buffer */
-   int   reserved1; /**< Reserved for future use */
-   void *reserved2; /**< Reserved for future use */
-} SpeexBits;
-
-/** Initializes and allocates resources for a SpeexBits struct */
-void speex_bits_init(SpeexBits *bits);
-
-/** Initializes SpeexBits struct using a pre-allocated buffer*/
-void speex_bits_init_buffer(SpeexBits *bits, void *buff, int buf_size);
-
-/** Sets the bits in a SpeexBits struct to use data from an existing buffer (for decoding without copying data) */
-void speex_bits_set_bit_buffer(SpeexBits *bits, void *buff, int buf_size);
-
-/** Frees all resources associated to a SpeexBits struct. Right now this does nothing since no resources are allocated, but this could change in the future.*/
-void speex_bits_destroy(SpeexBits *bits);
-
-/** Resets bits to initial value (just after initialization, erasing content)*/
-void speex_bits_reset(SpeexBits *bits);
-
-/** Rewind the bit-stream to the beginning (ready for read) without erasing the content */
-void speex_bits_rewind(SpeexBits *bits);
-
-/** Initializes the bit-stream from the data in an area of memory */
-void speex_bits_read_from(SpeexBits *bits, char *bytes, int len);
-
-/** Append bytes to the bit-stream
- * 
- * @param bits Bit-stream to operate on
- * @param bytes pointer to the bytes what will be appended
- * @param len Number of bytes of append
- */
-void speex_bits_read_whole_bytes(SpeexBits *bits, char *bytes, int len);
-
-/** Write the content of a bit-stream to an area of memory
- * 
- * @param bits Bit-stream to operate on
- * @param bytes Memory location where to write the bits
- * @param max_len Maximum number of bytes to write (i.e. size of the "bytes" buffer)
- * @return Number of bytes written to the "bytes" buffer
-*/
-int speex_bits_write(SpeexBits *bits, char *bytes, int max_len);
-
-/** Like speex_bits_write, but writes only the complete bytes in the stream. Also removes the written bytes from the stream */
-int speex_bits_write_whole_bytes(SpeexBits *bits, char *bytes, int max_len);
-
-/** Append bits to the bit-stream
- * @param bits Bit-stream to operate on
- * @param data Value to append as integer
- * @param nbBits number of bits to consider in "data"
- */
-void speex_bits_pack(SpeexBits *bits, int data, int nbBits);
-
-/** Interpret the next bits in the bit-stream as a signed integer
- *
- * @param bits Bit-stream to operate on
- * @param nbBits Number of bits to interpret
- * @return A signed integer represented by the bits read
- */
-int speex_bits_unpack_signed(SpeexBits *bits, int nbBits);
-
-/** Interpret the next bits in the bit-stream as an unsigned integer
- *
- * @param bits Bit-stream to operate on
- * @param nbBits Number of bits to interpret
- * @return An unsigned integer represented by the bits read
- */
-unsigned int speex_bits_unpack_unsigned(SpeexBits *bits, int nbBits);
-
-/** Returns the number of bytes in the bit-stream, including the last one even if it is not "full"
- *
- * @param bits Bit-stream to operate on
- * @return Number of bytes in the stream
- */
-int speex_bits_nbytes(SpeexBits *bits);
-
-/** Same as speex_bits_unpack_unsigned, but without modifying the cursor position 
- * 
- * @param bits Bit-stream to operate on
- * @param nbBits Number of bits to look for
- * @return Value of the bits peeked, interpreted as unsigned
- */
-unsigned int speex_bits_peek_unsigned(SpeexBits *bits, int nbBits);
-
-/** Get the value of the next bit in the stream, without modifying the
- * "cursor" position 
- * 
- * @param bits Bit-stream to operate on
- * @return Value of the bit peeked (one bit only)
- */
-int speex_bits_peek(SpeexBits *bits);
-
-/** Advances the position of the "bit cursor" in the stream 
- *
- * @param bits Bit-stream to operate on
- * @param n Number of bits to advance
- */
-void speex_bits_advance(SpeexBits *bits, int n);
-
-/** Returns the number of bits remaining to be read in a stream
- *
- * @param bits Bit-stream to operate on
- * @return Number of bits that can still be read from the stream
- */
-int speex_bits_remaining(SpeexBits *bits);
-
-/** Insert a terminator so that the data can be sent as a packet while auto-detecting 
- * the number of frames in each packet 
- *
- * @param bits Bit-stream to operate on
- */
-void speex_bits_insert_terminator(SpeexBits *bits);
-
-#ifdef __cplusplus
-}
-#endif
-
-/* @} */
-#endif
diff --git a/src/libspeex/include/speex/speex_buffer.h b/src/libspeex/include/speex/speex_buffer.h
deleted file mode 100644
index df56f5f1..00000000
--- a/src/libspeex/include/speex/speex_buffer.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* Copyright (C) 2007 Jean-Marc Valin
-      
-   File: speex_buffer.h
-   This is a very simple ring buffer implementation. It is not thread-safe
-   so you need to do your own locking.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-   1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-   2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   3. The name of the author may not be used to endorse or promote products
-   derived from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef SPEEX_BUFFER_H
-#define SPEEX_BUFFER_H
-
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct SpeexBuffer_;
-typedef struct SpeexBuffer_ SpeexBuffer;
-
-SpeexBuffer *speex_buffer_init(int size);
-
-void speex_buffer_destroy(SpeexBuffer *st);
-
-int speex_buffer_write(SpeexBuffer *st, void *data, int len);
-
-int speex_buffer_writezeros(SpeexBuffer *st, int len);
-
-int speex_buffer_read(SpeexBuffer *st, void *data, int len);
-
-int speex_buffer_get_available(SpeexBuffer *st);
-
-int speex_buffer_resize(SpeexBuffer *st, int len);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-
-
-
diff --git a/src/libspeex/include/speex/speex_callbacks.h b/src/libspeex/include/speex/speex_callbacks.h
deleted file mode 100644
index 6f450b3a..00000000
--- a/src/libspeex/include/speex/speex_callbacks.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin*/
-/**
-  @file speex_callbacks.h
-  @brief Describes callback handling and in-band signalling
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef SPEEX_CALLBACKS_H
-#define SPEEX_CALLBACKS_H
-/** @defgroup SpeexCallbacks Various definitions for Speex callbacks supported by the decoder.
- *  @{
- */
-
-#include "speex.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Total number of callbacks */
-#define SPEEX_MAX_CALLBACKS 16
-
-/* Describes all the in-band requests */
-
-/*These are 1-bit requests*/
-/** Request for perceptual enhancement (1 for on, 0 for off) */
-#define SPEEX_INBAND_ENH_REQUEST         0
-/** Reserved */
-#define SPEEX_INBAND_RESERVED1           1
-
-/*These are 4-bit requests*/
-/** Request for a mode change */
-#define SPEEX_INBAND_MODE_REQUEST        2
-/** Request for a low mode change */
-#define SPEEX_INBAND_LOW_MODE_REQUEST    3
-/** Request for a high mode change */
-#define SPEEX_INBAND_HIGH_MODE_REQUEST   4
-/** Request for VBR (1 on, 0 off) */
-#define SPEEX_INBAND_VBR_QUALITY_REQUEST 5
-/** Request to be sent acknowledge */
-#define SPEEX_INBAND_ACKNOWLEDGE_REQUEST 6
-/** Request for VBR (1 for on, 0 for off) */
-#define SPEEX_INBAND_VBR_REQUEST         7
-
-/*These are 8-bit requests*/
-/** Send a character in-band */
-#define SPEEX_INBAND_CHAR                8
-/** Intensity stereo information */
-#define SPEEX_INBAND_STEREO              9
-
-/*These are 16-bit requests*/
-/** Transmit max bit-rate allowed */
-#define SPEEX_INBAND_MAX_BITRATE         10
-
-/*These are 32-bit requests*/
-/** Acknowledge packet reception */
-#define SPEEX_INBAND_ACKNOWLEDGE         12
-
-/** Callback function type */
-typedef int (*speex_callback_func)(SpeexBits *bits, void *state, void *data);
-
-/** Callback information */
-typedef struct SpeexCallback {
-   int callback_id;             /**< ID associated to the callback */
-   speex_callback_func func;    /**< Callback handler function */
-   void *data;                  /**< Data that will be sent to the handler */
-   void *reserved1;             /**< Reserved for future use */
-   int   reserved2;             /**< Reserved for future use */
-} SpeexCallback;
-
-/** Handle in-band request */
-int speex_inband_handler(SpeexBits *bits, SpeexCallback *callback_list, void *state);
-
-/** Standard handler for mode request (change mode, no questions asked) */
-int speex_std_mode_request_handler(SpeexBits *bits, void *state, void *data);
-
-/** Standard handler for high mode request (change high mode, no questions asked) */
-int speex_std_high_mode_request_handler(SpeexBits *bits, void *state, void *data);
-
-/** Standard handler for in-band characters (write to stderr) */
-int speex_std_char_handler(SpeexBits *bits, void *state, void *data);
-
-/** Default handler for user-defined requests: in this case, just ignore */
-int speex_default_user_handler(SpeexBits *bits, void *state, void *data);
-
-
-
-/** Standard handler for low mode request (change low mode, no questions asked) */
-int speex_std_low_mode_request_handler(SpeexBits *bits, void *state, void *data);
-
-/** Standard handler for VBR request (Set VBR, no questions asked) */
-int speex_std_vbr_request_handler(SpeexBits *bits, void *state, void *data);
-
-/** Standard handler for enhancer request (Turn enhancer on/off, no questions asked) */
-int speex_std_enh_request_handler(SpeexBits *bits, void *state, void *data);
-
-/** Standard handler for VBR quality request (Set VBR quality, no questions asked) */
-int speex_std_vbr_quality_request_handler(SpeexBits *bits, void *state, void *data);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @} */
-#endif
diff --git a/src/libspeex/include/speex/speex_config_types.h b/src/libspeex/include/speex/speex_config_types.h
deleted file mode 100644
index bfad7767..00000000
--- a/src/libspeex/include/speex/speex_config_types.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __SPEEX_TYPES_H__
-#define __SPEEX_TYPES_H__
-
-#ifdef _MSC_VER
-typedef __int16 spx_int16_t;
-typedef __int32 spx_int32_t;
-typedef unsigned __int16 spx_uint16_t;
-typedef unsigned __int32 spx_uint32_t;
-#else
-#include <stdint.h>
-typedef int16_t spx_int16_t;
-typedef int32_t spx_int32_t;
-typedef uint16_t spx_uint16_t;
-typedef uint32_t spx_uint32_t;
-#endif
-
-#endif
-
diff --git a/src/libspeex/include/speex/speex_echo.h b/src/libspeex/include/speex/speex_echo.h
deleted file mode 100644
index 77a78468..00000000
--- a/src/libspeex/include/speex/speex_echo.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Copyright (C) Jean-Marc Valin */
-/**
-   @file speex_echo.h
-   @brief Echo cancellation
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-   1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-   2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   3. The name of the author may not be used to endorse or promote products
-   derived from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef SPEEX_ECHO_H
-#define SPEEX_ECHO_H
-/** @defgroup SpeexEchoState SpeexEchoState: Acoustic echo canceller
- *  This is the acoustic echo canceller module.
- *  @{
- */
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Obtain frame size used by the AEC */
-#define SPEEX_ECHO_GET_FRAME_SIZE 3
-
-/** Set sampling rate */
-#define SPEEX_ECHO_SET_SAMPLING_RATE 24
-/** Get sampling rate */
-#define SPEEX_ECHO_GET_SAMPLING_RATE 25
-
-/** Internal echo canceller state. Should never be accessed directly. */
-struct SpeexEchoState_;
-
-/** @class SpeexEchoState
- * This holds the state of the echo canceller. You need one per channel. 
-*/
-
-/** Internal echo canceller state. Should never be accessed directly. */
-typedef struct SpeexEchoState_ SpeexEchoState;
-
-/** Creates a new echo canceller state
- * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms)
- * @param filter_length Number of samples of echo to cancel (should generally correspond to 100-500 ms)
- * @return Newly-created echo canceller state
- */
-SpeexEchoState *speex_echo_state_init(int frame_size, int filter_length);
-
-/** Destroys an echo canceller state 
- * @param st Echo canceller state
-*/
-void speex_echo_state_destroy(SpeexEchoState *st);
-
-/** Performs echo cancellation a frame, based on the audio sent to the speaker (no delay is added
- * to playback in this form)
- *
- * @param st Echo canceller state
- * @param rec Signal from the microphone (near end + far end echo)
- * @param play Signal played to the speaker (received from far end)
- * @param out Returns near-end signal with echo removed
- */
-void speex_echo_cancellation(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out);
-
-/** Performs echo cancellation a frame (deprecated) */
-void speex_echo_cancel(SpeexEchoState *st, const spx_int16_t *rec, const spx_int16_t *play, spx_int16_t *out, spx_int32_t *Yout);
-
-/** Perform echo cancellation using internal playback buffer, which is delayed by two frames
- * to account for the delay introduced by most soundcards (but it could be off!)
- * @param st Echo canceller state
- * @param rec Signal from the microphone (near end + far end echo)
- * @param out Returns near-end signal with echo removed
-*/
-void speex_echo_capture(SpeexEchoState *st, const spx_int16_t *rec, spx_int16_t *out);
-
-/** Let the echo canceller know that a frame was just queued to the soundcard
- * @param st Echo canceller state
- * @param play Signal played to the speaker (received from far end)
-*/
-void speex_echo_playback(SpeexEchoState *st, const spx_int16_t *play);
-
-/** Reset the echo canceller to its original state 
- * @param st Echo canceller state
- */
-void speex_echo_state_reset(SpeexEchoState *st);
-
-/** Used like the ioctl function to control the echo canceller parameters
- *
- * @param st Echo canceller state
- * @param request ioctl-type request (one of the SPEEX_ECHO_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown
- */
-int speex_echo_ctl(SpeexEchoState *st, int request, void *ptr);
-
-#ifdef __cplusplus
-}
-#endif
-
-
-/** @}*/
-#endif
diff --git a/src/libspeex/include/speex/speex_header.h b/src/libspeex/include/speex/speex_header.h
deleted file mode 100644
index f85b2496..00000000
--- a/src/libspeex/include/speex/speex_header.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin */
-/**
-   @file speex_header.h
-   @brief Describes the Speex header
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-
-#ifndef SPEEX_HEADER_H
-#define SPEEX_HEADER_H
-/** @defgroup SpeexHeader SpeexHeader: Makes it easy to write/parse an Ogg/Speex header
- *  This is the Speex header for the Ogg encapsulation. You don't need that if you just use RTP.
- *  @{
- */
-
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct SpeexMode;
-
-/** Length of the Speex header identifier */
-#define SPEEX_HEADER_STRING_LENGTH 8
-
-/** Maximum number of characters for encoding the Speex version number in the header */
-#define SPEEX_HEADER_VERSION_LENGTH 20
-
-/** Speex header info for file-based formats */
-typedef struct SpeexHeader {
-   char speex_string[SPEEX_HEADER_STRING_LENGTH];   /**< Identifies a Speex bit-stream, always set to "Speex   " */
-   char speex_version[SPEEX_HEADER_VERSION_LENGTH]; /**< Speex version */ 
-   spx_int32_t speex_version_id;       /**< Version for Speex (for checking compatibility) */
-   spx_int32_t header_size;            /**< Total size of the header ( sizeof(SpeexHeader) ) */
-   spx_int32_t rate;                   /**< Sampling rate used */
-   spx_int32_t mode;                   /**< Mode used (0 for narrowband, 1 for wideband) */
-   spx_int32_t mode_bitstream_version; /**< Version ID of the bit-stream */
-   spx_int32_t nb_channels;            /**< Number of channels encoded */
-   spx_int32_t bitrate;                /**< Bit-rate used */
-   spx_int32_t frame_size;             /**< Size of frames */
-   spx_int32_t vbr;                    /**< 1 for a VBR encoding, 0 otherwise */
-   spx_int32_t frames_per_packet;      /**< Number of frames stored per Ogg packet */
-   spx_int32_t extra_headers;          /**< Number of additional headers after the comments */
-   spx_int32_t reserved1;              /**< Reserved for future use, must be zero */
-   spx_int32_t reserved2;              /**< Reserved for future use, must be zero */
-} SpeexHeader;
-
-/** Initializes a SpeexHeader using basic information */
-void speex_init_header(SpeexHeader *header, int rate, int nb_channels, const struct SpeexMode *m);
-
-/** Creates the header packet from the header itself (mostly involves endianness conversion) */
-char *speex_header_to_packet(SpeexHeader *header, int *size);
-
-/** Creates a SpeexHeader from a packet */
-SpeexHeader *speex_packet_to_header(char *packet, int size);
-
-/** Frees the memory allocated by either speex_header_to_packet() or speex_packet_to_header() */
-void speex_header_free(void *ptr);
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @} */
-#endif
diff --git a/src/libspeex/include/speex/speex_jitter.h b/src/libspeex/include/speex/speex_jitter.h
deleted file mode 100644
index d68674b1..00000000
--- a/src/libspeex/include/speex/speex_jitter.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin */
-/**
-   @file speex_jitter.h
-   @brief Adaptive jitter buffer for Speex
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef SPEEX_JITTER_H
-#define SPEEX_JITTER_H
-/** @defgroup JitterBuffer JitterBuffer: Adaptive jitter buffer
- *  This is the jitter buffer that reorders UDP/RTP packets and adjusts the buffer size
- * to maintain good quality and low latency.
- *  @{
- */
-
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Generic adaptive jitter buffer state */
-struct JitterBuffer_;
-
-/** Generic adaptive jitter buffer state */
-typedef struct JitterBuffer_ JitterBuffer;
-
-/** Definition of an incoming packet */
-typedef struct _JitterBufferPacket JitterBufferPacket;
-
-/** Definition of an incoming packet */
-struct _JitterBufferPacket {
-   char        *data;       /**< Data bytes contained in the packet */
-   spx_uint32_t len;        /**< Length of the packet in bytes */
-   spx_uint32_t timestamp;  /**< Timestamp for the packet */
-   spx_uint32_t span;       /**< Time covered by the packet (same units as timestamp) */
-   spx_uint16_t sequence;   /**< RTP Sequence number if available (0 otherwise) */
-   spx_uint32_t user_data;  /**< Put whatever data you like here (it's ignored by the jitter buffer) */
-};
-
-/** Packet has been retrieved */
-#define JITTER_BUFFER_OK 0
-/** Packet is lost or is late */
-#define JITTER_BUFFER_MISSING 1
-/** A "fake" packet is meant to be inserted here to increase buffering */
-#define JITTER_BUFFER_INSERTION 2
-/** There was an error in the jitter buffer */
-#define JITTER_BUFFER_INTERNAL_ERROR -1
-/** Invalid argument */
-#define JITTER_BUFFER_BAD_ARGUMENT -2
-
-
-/** Set minimum amount of extra buffering required (margin) */
-#define JITTER_BUFFER_SET_MARGIN 0
-/** Get minimum amount of extra buffering required (margin) */
-#define JITTER_BUFFER_GET_MARGIN 1
-/* JITTER_BUFFER_SET_AVAILABLE_COUNT wouldn't make sense */
-
-/** Get the amount of available packets currently buffered */
-#define JITTER_BUFFER_GET_AVAILABLE_COUNT 3
-/** Included because of an early misspelling (will remove in next release) */
-#define JITTER_BUFFER_GET_AVALIABLE_COUNT 3
-
-/** Assign a function to destroy unused packet. When setting that, the jitter 
-    buffer no longer copies packet data. */
-#define JITTER_BUFFER_SET_DESTROY_CALLBACK 4
-/**  */
-#define JITTER_BUFFER_GET_DESTROY_CALLBACK 5
-
-/** Tell the jitter buffer to only adjust the delay in multiples of the step parameter provided */
-#define JITTER_BUFFER_SET_DELAY_STEP 6
-/**  */
-#define JITTER_BUFFER_GET_DELAY_STEP 7
-
-/** Tell the jitter buffer to only do concealment in multiples of the size parameter provided */
-#define JITTER_BUFFER_SET_CONCEALMENT_SIZE 8
-#define JITTER_BUFFER_GET_CONCEALMENT_SIZE 9
-
-/** Absolute max amount of loss that can be tolerated regardless of the delay. Typical loss 
-    should be half of that or less. */
-#define JITTER_BUFFER_SET_MAX_LATE_RATE 10
-#define JITTER_BUFFER_GET_MAX_LATE_RATE 11
-
-/** Equivalent cost of one percent late packet in timestamp units */
-#define JITTER_BUFFER_SET_LATE_COST 12
-#define JITTER_BUFFER_GET_LATE_COST 13
-
-
-/** Initialises jitter buffer 
- * 
- * @param step_size Starting value for the size of concleanment packets and delay 
-       adjustment steps. Can be changed at any time using JITTER_BUFFER_SET_DELAY_STEP
-       and JITTER_BUFFER_GET_CONCEALMENT_SIZE.
- * @return Newly created jitter buffer state
- */
-JitterBuffer *jitter_buffer_init(int step_size);
-
-/** Restores jitter buffer to its original state 
- * 
- * @param jitter Jitter buffer state
- */
-void jitter_buffer_reset(JitterBuffer *jitter);
-
-/** Destroys jitter buffer 
- * 
- * @param jitter Jitter buffer state
- */
-void jitter_buffer_destroy(JitterBuffer *jitter);
-
-/** Put one packet into the jitter buffer
- * 
- * @param jitter Jitter buffer state
- * @param packet Incoming packet
-*/
-void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet);
-
-/** Get one packet from the jitter buffer
- * 
- * @param jitter Jitter buffer state
- * @param packet Returned packet
- * @param desired_span Number of samples (or units) we wish to get from the buffer (no guarantee)
- * @param current_timestamp Timestamp for the returned packet 
-*/
-int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t desired_span, spx_int32_t *start_offset);
-
-/** Used right after jitter_buffer_get() to obtain another packet that would have the same timestamp.
- * This is mainly useful for media where a single "frame" can be split into several packets.
- * 
- * @param jitter Jitter buffer state
- * @param packet Returned packet
- */
-int jitter_buffer_get_another(JitterBuffer *jitter, JitterBufferPacket *packet);
-
-/** Get pointer timestamp of jitter buffer
- * 
- * @param jitter Jitter buffer state
-*/
-int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter);
-
-/** Advance by one tick
- * 
- * @param jitter Jitter buffer state
-*/
-void jitter_buffer_tick(JitterBuffer *jitter);
-
-/** Telling the jitter buffer about the remaining data in the application buffer
- * @param jitter Jitter buffer state
- * @param rem Amount of data buffered by the application (timestamp units)
- */
-void jitter_buffer_remaining_span(JitterBuffer *jitter, spx_uint32_t rem);
-
-/** Used like the ioctl function to control the jitter buffer parameters
- * 
- * @param jitter Jitter buffer state
- * @param request ioctl-type request (one of the JITTER_BUFFER_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown
-*/
-int jitter_buffer_ctl(JitterBuffer *jitter, int request, void *ptr);
-
-int jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset);
-
-/* @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/src/libspeex/include/speex/speex_preprocess.h b/src/libspeex/include/speex/speex_preprocess.h
deleted file mode 100644
index a0d3aa3d..00000000
--- a/src/libspeex/include/speex/speex_preprocess.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* Copyright (C) 2003 Epic Games
-   Written by Jean-Marc Valin */
-/**
- *  @file speex_preprocess.h
- *  @brief Speex preprocessor. The preprocess can do noise suppression, 
- * residual echo suppression (after using the echo canceller), automatic
- * gain control (AGC) and voice activity detection (VAD).
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-   1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-   2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   3. The name of the author may not be used to endorse or promote products
-   derived from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef SPEEX_PREPROCESS_H
-#define SPEEX_PREPROCESS_H
-/** @defgroup SpeexPreprocessState SpeexPreprocessState: The Speex preprocessor
- *  This is the Speex preprocessor. The preprocess can do noise suppression, 
- * residual echo suppression (after using the echo canceller), automatic
- * gain control (AGC) and voice activity detection (VAD).
- *  @{
- */
-
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-   
-/** State of the preprocessor (one per channel). Should never be accessed directly. */
-struct SpeexPreprocessState_;
-
-/** State of the preprocessor (one per channel). Should never be accessed directly. */
-typedef struct SpeexPreprocessState_ SpeexPreprocessState;
-
-
-/** Creates a new preprocessing state. You MUST create one state per channel processed.
- * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms). Must be
- * the same value as that used for the echo canceller for residual echo cancellation to work.
- * @param sampling_rate Sampling rate used for the input.
- * @return Newly created preprocessor state
-*/
-SpeexPreprocessState *speex_preprocess_state_init(int frame_size, int sampling_rate);
-
-/** Destroys a preprocessor state 
- * @param st Preprocessor state to destroy
-*/
-void speex_preprocess_state_destroy(SpeexPreprocessState *st);
-
-/** Preprocess a frame 
- * @param st Preprocessor state
- * @param x Audio sample vector (in and out). Must be same size as specified in speex_preprocess_state_init().
- * @return Bool value for voice activity (1 for speech, 0 for noise/silence), ONLY if VAD turned on.
-*/
-int speex_preprocess_run(SpeexPreprocessState *st, spx_int16_t *x);
-
-/** Preprocess a frame (deprecated, use speex_preprocess_run() instead)*/
-int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo);
-
-/** Update preprocessor state, but do not compute the output
- * @param st Preprocessor state
- * @param x Audio sample vector (in only). Must be same size as specified in speex_preprocess_state_init().
-*/
-void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x);
-
-/** Used like the ioctl function to control the preprocessor parameters 
- * @param st Preprocessor state
- * @param request ioctl-type request (one of the SPEEX_PREPROCESS_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown
-*/
-int speex_preprocess_ctl(SpeexPreprocessState *st, int request, void *ptr);
-
-
-
-/** Set preprocessor denoiser state */
-#define SPEEX_PREPROCESS_SET_DENOISE 0
-/** Get preprocessor denoiser state */
-#define SPEEX_PREPROCESS_GET_DENOISE 1
-
-/** Set preprocessor Automatic Gain Control state */
-#define SPEEX_PREPROCESS_SET_AGC 2
-/** Get preprocessor Automatic Gain Control state */
-#define SPEEX_PREPROCESS_GET_AGC 3
-
-/** Set preprocessor Voice Activity Detection state */
-#define SPEEX_PREPROCESS_SET_VAD 4
-/** Get preprocessor Voice Activity Detection state */
-#define SPEEX_PREPROCESS_GET_VAD 5
-
-/** Set preprocessor Automatic Gain Control level */
-#define SPEEX_PREPROCESS_SET_AGC_LEVEL 6
-/** Get preprocessor Automatic Gain Control level */
-#define SPEEX_PREPROCESS_GET_AGC_LEVEL 7
-
-/** Set preprocessor dereverb state */
-#define SPEEX_PREPROCESS_SET_DEREVERB 8
-/** Get preprocessor dereverb state */
-#define SPEEX_PREPROCESS_GET_DEREVERB 9
-
-/** Set preprocessor dereverb level */
-#define SPEEX_PREPROCESS_SET_DEREVERB_LEVEL 10
-/** Get preprocessor dereverb level */
-#define SPEEX_PREPROCESS_GET_DEREVERB_LEVEL 11
-
-/** Set preprocessor dereverb decay */
-#define SPEEX_PREPROCESS_SET_DEREVERB_DECAY 12
-/** Get preprocessor dereverb decay */
-#define SPEEX_PREPROCESS_GET_DEREVERB_DECAY 13
-
-/** Set probability required for the VAD to go from silence to voice */
-#define SPEEX_PREPROCESS_SET_PROB_START 14
-/** Get probability required for the VAD to go from silence to voice */
-#define SPEEX_PREPROCESS_GET_PROB_START 15
-
-/** Set probability required for the VAD to stay in the voice state (integer percent) */
-#define SPEEX_PREPROCESS_SET_PROB_CONTINUE 16
-/** Get probability required for the VAD to stay in the voice state (integer percent) */
-#define SPEEX_PREPROCESS_GET_PROB_CONTINUE 17
-
-/** Set maximum attenuation of the noise in dB (negative number) */
-#define SPEEX_PREPROCESS_SET_NOISE_SUPPRESS 18
-/** Get maximum attenuation of the noise in dB (negative number) */
-#define SPEEX_PREPROCESS_GET_NOISE_SUPPRESS 19
-
-/** Set maximum attenuation of the residual echo in dB (negative number) */
-#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS 20
-/** Get maximum attenuation of the residual echo in dB (negative number) */
-#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS 21
-
-/** Set maximum attenuation of the residual echo in dB when near end is active (negative number) */
-#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS_ACTIVE 22
-/** Get maximum attenuation of the residual echo in dB when near end is active (negative number) */
-#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS_ACTIVE 23
-
-/** Set the corresponding echo canceller state so that residual echo suppression can be performed (NULL for no residual echo suppression) */
-#define SPEEX_PREPROCESS_SET_ECHO_STATE 24
-/** Get the corresponding echo canceller state */
-#define SPEEX_PREPROCESS_GET_ECHO_STATE 25
-
-/** Set maximal gain increase in dB/second (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_INCREMENT 26
-
-/** Get maximal gain increase in dB/second (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_INCREMENT 27
-
-/** Set maximal gain decrease in dB/second (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_DECREMENT 28
-
-/** Get maximal gain decrease in dB/second (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_DECREMENT 29
-
-/** Set maximal gain in dB (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_MAX_GAIN 30
-
-/** Get maximal gain in dB (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_MAX_GAIN 31
-
-/*  Can't set loudness */
-/** Get loudness */
-#define SPEEX_PREPROCESS_GET_AGC_LOUDNESS 33
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @}*/
-#endif
diff --git a/src/libspeex/include/speex/speex_resampler.h b/src/libspeex/include/speex/speex_resampler.h
deleted file mode 100644
index 54eef8d7..00000000
--- a/src/libspeex/include/speex/speex_resampler.h
+++ /dev/null
@@ -1,340 +0,0 @@
-/* Copyright (C) 2007 Jean-Marc Valin
-      
-   File: speex_resampler.h
-   Resampling code
-      
-   The design goals of this code are:
-      - Very fast algorithm
-      - Low memory requirement
-      - Good *perceptual* quality (and not best SNR)
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-   1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-   2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   3. The name of the author may not be used to endorse or promote products
-   derived from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-#ifndef SPEEX_RESAMPLER_H
-#define SPEEX_RESAMPLER_H
-
-#ifdef OUTSIDE_SPEEX
-
-/********* WARNING: MENTAL SANITY ENDS HERE *************/
-
-/* If the resampler is defined outside of Speex, we change the symbol names so that 
-   there won't be any clash if linking with Speex later on. */
-
-/* #define RANDOM_PREFIX your software name here */
-#ifndef RANDOM_PREFIX
-#error "Please define RANDOM_PREFIX (above) to something specific to your project to prevent symbol name clashes"
-#endif
-
-#define CAT_PREFIX2(a,b) a ## b
-#define CAT_PREFIX(a,b) CAT_PREFIX2(a, b)
-      
-#define speex_resampler_init CAT_PREFIX(RANDOM_PREFIX,_resampler_init)
-#define speex_resampler_init_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_init_frac)
-#define speex_resampler_destroy CAT_PREFIX(RANDOM_PREFIX,_resampler_destroy)
-#define speex_resampler_process_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_float)
-#define speex_resampler_process_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_int)
-#define speex_resampler_process_interleaved_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_float)
-#define speex_resampler_process_interleaved_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_int)
-#define speex_resampler_set_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate)
-#define speex_resampler_get_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_get_rate)
-#define speex_resampler_set_rate_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate_frac)
-#define speex_resampler_get_ratio CAT_PREFIX(RANDOM_PREFIX,_resampler_get_ratio)
-#define speex_resampler_set_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_set_quality)
-#define speex_resampler_get_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_get_quality)
-#define speex_resampler_set_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_input_stride)
-#define speex_resampler_get_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_stride)
-#define speex_resampler_set_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_output_stride)
-#define speex_resampler_get_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_stride)
-#define speex_resampler_get_input_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_latency)
-#define speex_resampler_get_output_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_latency)
-#define speex_resampler_skip_zeros CAT_PREFIX(RANDOM_PREFIX,_resampler_skip_zeros)
-#define speex_resampler_reset_mem CAT_PREFIX(RANDOM_PREFIX,_resampler_reset_mem)
-#define speex_resampler_strerror CAT_PREFIX(RANDOM_PREFIX,_resampler_strerror)
-
-#define spx_int16_t short
-#define spx_int32_t int
-#define spx_uint16_t unsigned short
-#define spx_uint32_t unsigned int
-      
-#else /* OUTSIDE_SPEEX */
-
-#include "speex/speex_types.h"
-
-#endif /* OUTSIDE_SPEEX */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define SPEEX_RESAMPLER_QUALITY_MAX 10
-#define SPEEX_RESAMPLER_QUALITY_MIN 0
-#define SPEEX_RESAMPLER_QUALITY_DEFAULT 4
-#define SPEEX_RESAMPLER_QUALITY_VOIP 3
-#define SPEEX_RESAMPLER_QUALITY_DESKTOP 5
-
-enum {
-   RESAMPLER_ERR_SUCCESS         = 0,
-   RESAMPLER_ERR_ALLOC_FAILED    = 1,
-   RESAMPLER_ERR_BAD_STATE       = 2,
-   RESAMPLER_ERR_INVALID_ARG     = 3,
-   RESAMPLER_ERR_PTR_OVERLAP     = 4,
-   
-   RESAMPLER_ERR_MAX_ERROR
-};
-
-struct SpeexResamplerState_;
-typedef struct SpeexResamplerState_ SpeexResamplerState;
-
-/** Create a new resampler with integer input and output rates.
- * @param nb_channels Number of channels to be processed
- * @param in_rate Input sampling rate (integer number of Hz).
- * @param out_rate Output sampling rate (integer number of Hz).
- * @param quality Resampling quality between 0 and 10, where 0 has poor quality
- * and 10 has very high quality.
- * @return Newly created resampler state
- * @retval NULL Error: not enough memory
- */
-SpeexResamplerState *speex_resampler_init(spx_uint32_t nb_channels, 
-                                          spx_uint32_t in_rate, 
-                                          spx_uint32_t out_rate, 
-                                          int quality,
-                                          int *err);
-
-/** Create a new resampler with fractional input/output rates. The sampling 
- * rate ratio is an arbitrary rational number with both the numerator and 
- * denominator being 32-bit integers.
- * @param nb_channels Number of channels to be processed
- * @param ratio_num Numerator of the sampling rate ratio
- * @param ratio_den Denominator of the sampling rate ratio
- * @param in_rate Input sampling rate rounded to the nearest integer (in Hz).
- * @param out_rate Output sampling rate rounded to the nearest integer (in Hz).
- * @param quality Resampling quality between 0 and 10, where 0 has poor quality
- * and 10 has very high quality.
- * @return Newly created resampler state
- * @retval NULL Error: not enough memory
- */
-SpeexResamplerState *speex_resampler_init_frac(spx_uint32_t nb_channels, 
-                                               spx_uint32_t ratio_num, 
-                                               spx_uint32_t ratio_den, 
-                                               spx_uint32_t in_rate, 
-                                               spx_uint32_t out_rate, 
-                                               int quality,
-                                               int *err);
-
-/** Destroy a resampler state.
- * @param st Resampler state
- */
-void speex_resampler_destroy(SpeexResamplerState *st);
-
-/** Resample a float array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param channel_index Index of the channel to process for the multi-channel 
- * base (0 otherwise)
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the 
- * number of samples processed
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written
- */
-int speex_resampler_process_float(SpeexResamplerState *st, 
-                                   spx_uint32_t channel_index, 
-                                   const float *in, 
-                                   spx_uint32_t *in_len, 
-                                   float *out, 
-                                   spx_uint32_t *out_len);
-
-/** Resample an int array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param channel_index Index of the channel to process for the multi-channel 
- * base (0 otherwise)
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the number
- * of samples processed
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written
- */
-int speex_resampler_process_int(SpeexResamplerState *st, 
-                                 spx_uint32_t channel_index, 
-                                 const spx_int16_t *in, 
-                                 spx_uint32_t *in_len, 
-                                 spx_int16_t *out, 
-                                 spx_uint32_t *out_len);
-
-/** Resample an interleaved float array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the number
- * of samples processed. This is all per-channel.
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written.
- * This is all per-channel.
- */
-int speex_resampler_process_interleaved_float(SpeexResamplerState *st, 
-                                               const float *in, 
-                                               spx_uint32_t *in_len, 
-                                               float *out, 
-                                               spx_uint32_t *out_len);
-
-/** Resample an interleaved int array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the number
- * of samples processed. This is all per-channel.
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written.
- * This is all per-channel.
- */
-int speex_resampler_process_interleaved_int(SpeexResamplerState *st, 
-                                             const spx_int16_t *in, 
-                                             spx_uint32_t *in_len, 
-                                             spx_int16_t *out, 
-                                             spx_uint32_t *out_len);
-
-/** Set (change) the input/output sampling rates (integer value).
- * @param st Resampler state
- * @param in_rate Input sampling rate (integer number of Hz).
- * @param out_rate Output sampling rate (integer number of Hz).
- */
-int speex_resampler_set_rate(SpeexResamplerState *st, 
-                              spx_uint32_t in_rate, 
-                              spx_uint32_t out_rate);
-
-/** Get the current input/output sampling rates (integer value).
- * @param st Resampler state
- * @param in_rate Input sampling rate (integer number of Hz) copied.
- * @param out_rate Output sampling rate (integer number of Hz) copied.
- */
-void speex_resampler_get_rate(SpeexResamplerState *st, 
-                              spx_uint32_t *in_rate, 
-                              spx_uint32_t *out_rate);
-
-/** Set (change) the input/output sampling rates and resampling ratio 
- * (fractional values in Hz supported).
- * @param st Resampler state
- * @param ratio_num Numerator of the sampling rate ratio
- * @param ratio_den Denominator of the sampling rate ratio
- * @param in_rate Input sampling rate rounded to the nearest integer (in Hz).
- * @param out_rate Output sampling rate rounded to the nearest integer (in Hz).
- */
-int speex_resampler_set_rate_frac(SpeexResamplerState *st, 
-                                   spx_uint32_t ratio_num, 
-                                   spx_uint32_t ratio_den, 
-                                   spx_uint32_t in_rate, 
-                                   spx_uint32_t out_rate);
-
-/** Get the current resampling ratio. This will be reduced to the least
- * common denominator.
- * @param st Resampler state
- * @param ratio_num Numerator of the sampling rate ratio copied
- * @param ratio_den Denominator of the sampling rate ratio copied
- */
-void speex_resampler_get_ratio(SpeexResamplerState *st, 
-                               spx_uint32_t *ratio_num, 
-                               spx_uint32_t *ratio_den);
-
-/** Set (change) the conversion quality.
- * @param st Resampler state
- * @param quality Resampling quality between 0 and 10, where 0 has poor 
- * quality and 10 has very high quality.
- */
-int speex_resampler_set_quality(SpeexResamplerState *st, 
-                                 int quality);
-
-/** Get the conversion quality.
- * @param st Resampler state
- * @param quality Resampling quality between 0 and 10, where 0 has poor 
- * quality and 10 has very high quality.
- */
-void speex_resampler_get_quality(SpeexResamplerState *st, 
-                                 int *quality);
-
-/** Set (change) the input stride.
- * @param st Resampler state
- * @param stride Input stride
- */
-void speex_resampler_set_input_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t stride);
-
-/** Get the input stride.
- * @param st Resampler state
- * @param stride Input stride copied
- */
-void speex_resampler_get_input_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t *stride);
-
-/** Set (change) the output stride.
- * @param st Resampler state
- * @param stride Output stride
- */
-void speex_resampler_set_output_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t stride);
-
-/** Get the output stride.
- * @param st Resampler state copied
- * @param stride Output stride
- */
-void speex_resampler_get_output_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t *stride);
-
-/** Get the latency in input samples introduced by the resampler.
- * @param st Resampler state
- */
-int speex_resampler_get_input_latency(SpeexResamplerState *st);
-
-/** Get the latency in output samples introduced by the resampler.
- * @param st Resampler state
- */
-int speex_resampler_get_output_latency(SpeexResamplerState *st);
-
-/** Make sure that the first samples to go out of the resamplers don't have 
- * leading zeros. This is only useful before starting to use a newly created 
- * resampler. It is recommended to use that when resampling an audio file, as
- * it will generate a file with the same length. For real-time processing,
- * it is probably easier not to use this call (so that the output duration
- * is the same for the first frame).
- * @param st Resampler state
- */
-int speex_resampler_skip_zeros(SpeexResamplerState *st);
-
-/** Reset a resampler so a new (unrelated) stream can be processed.
- * @param st Resampler state
- */
-int speex_resampler_reset_mem(SpeexResamplerState *st);
-
-/** Returns the English meaning for an error code
- * @param err Error code
- * @return English string
- */
-const char *speex_resampler_strerror(int err);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/src/libspeex/include/speex/speex_stereo.h b/src/libspeex/include/speex/speex_stereo.h
deleted file mode 100644
index 415915db..00000000
--- a/src/libspeex/include/speex/speex_stereo.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin*/
-/**
-   @file speex_stereo.h
-   @brief Describes the handling for intensity stereo
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef STEREO_H
-#define STEREO_H
-/** @defgroup SpeexStereoState SpeexStereoState: Handling Speex stereo files
- *  This describes the Speex intensity stereo encoding/decoding
- *  @{
- */
-
-#include "speex/speex_types.h"
-#include "speex/speex_bits.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** If you access any of these fields directly, I'll personally come and bite you */
-typedef struct SpeexStereoState {
-   float balance;      /**< Left/right balance info */
-   float e_ratio;      /**< Ratio of energies: E(left+right)/[E(left)+E(right)]  */
-   float smooth_left;  /**< Smoothed left channel gain */
-   float smooth_right; /**< Smoothed right channel gain */
-   float reserved1;    /**< Reserved for future use */
-   float reserved2;    /**< Reserved for future use */
-} SpeexStereoState;
-
-/** Deprecated. Use speex_stereo_state_init() instead. */
-#define SPEEX_STEREO_STATE_INIT {1,.5,1,1,0,0}
-
-/** Initialise/create a stereo stereo state */
-SpeexStereoState *speex_stereo_state_init(void);
-
-/** Reset/re-initialise an already allocated stereo state */
-void speex_stereo_state_reset(SpeexStereoState *stereo);
-
-/** Destroy a stereo stereo state */
-void speex_stereo_state_destroy(SpeexStereoState *stereo);
-
-/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */
-void speex_encode_stereo(float *data, int frame_size, SpeexBits *bits);
-
-/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */
-void speex_encode_stereo_int(spx_int16_t *data, int frame_size, SpeexBits *bits);
-
-/** Transforms a mono frame into a stereo frame using intensity stereo info */
-void speex_decode_stereo(float *data, int frame_size, SpeexStereoState *stereo);
-
-/** Transforms a mono frame into a stereo frame using intensity stereo info */
-void speex_decode_stereo_int(spx_int16_t *data, int frame_size, SpeexStereoState *stereo);
-
-/** Callback handler for intensity stereo info */
-int speex_std_stereo_request_handler(SpeexBits *bits, void *state, void *data);
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @} */
-#endif
diff --git a/src/libspeex/include/speex/speex_types.h b/src/libspeex/include/speex/speex_types.h
deleted file mode 100644
index 852fed80..00000000
--- a/src/libspeex/include/speex/speex_types.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* speex_types.h taken from libogg */
-/********************************************************************
- *                                                                  *
- * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
- * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
- * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
- * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
- *                                                                  *
- * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2002             *
- * by the Xiph.Org Foundation http://www.xiph.org/                  *
- *                                                                  *
- ********************************************************************
-
- function: #ifdef jail to whip a few platforms into the UNIX ideal.
- last mod: $Id: os_types.h 7524 2004-08-11 04:20:36Z conrad $
-
- ********************************************************************/
-/**
-   @file speex_types.h
-   @brief Speex types
-*/
-#ifndef _SPEEX_TYPES_H
-#define _SPEEX_TYPES_H
-
-#if defined(_WIN32) 
-
-#  if defined(__CYGWIN__)
-#    include <_G_config.h>
-     typedef _G_int32_t spx_int32_t;
-     typedef _G_uint32_t spx_uint32_t;
-     typedef _G_int16_t spx_int16_t;
-     typedef _G_uint16_t spx_uint16_t;
-#  elif defined(__MINGW32__)
-     typedef short spx_int16_t;
-     typedef unsigned short spx_uint16_t;
-     typedef int spx_int32_t;
-     typedef unsigned int spx_uint32_t;
-#  elif defined(__MWERKS__)
-     typedef int spx_int32_t;
-     typedef unsigned int spx_uint32_t;
-     typedef short spx_int16_t;
-     typedef unsigned short spx_uint16_t;
-#  else
-     /* MSVC/Borland */
-     typedef __int32 spx_int32_t;
-     typedef unsigned __int32 spx_uint32_t;
-     typedef __int16 spx_int16_t;
-     typedef unsigned __int16 spx_uint16_t;
-#  endif
-
-#elif defined(__MACOS__)
-
-#  include <sys/types.h>
-   typedef SInt16 spx_int16_t;
-   typedef UInt16 spx_uint16_t;
-   typedef SInt32 spx_int32_t;
-   typedef UInt32 spx_uint32_t;
-
-#elif (defined(__APPLE__) && defined(__MACH__)) /* MacOS X Framework build */
-
-#  include <sys/types.h>
-   typedef int16_t spx_int16_t;
-   typedef u_int16_t spx_uint16_t;
-   typedef int32_t spx_int32_t;
-   typedef u_int32_t spx_uint32_t;
-
-#elif defined(__BEOS__)
-
-   /* Be */
-#  include <inttypes.h>
-   typedef int16_t spx_int16_t;
-   typedef u_int16_t spx_uint16_t;
-   typedef int32_t spx_int32_t;
-   typedef u_int32_t spx_uint32_t;
-
-#elif defined (__EMX__)
-
-   /* OS/2 GCC */
-   typedef short spx_int16_t;
-   typedef unsigned short spx_uint16_t;
-   typedef int spx_int32_t;
-   typedef unsigned int spx_uint32_t;
-
-#elif defined (DJGPP)
-
-   /* DJGPP */
-   typedef short spx_int16_t;
-   typedef int spx_int32_t;
-   typedef unsigned int spx_uint32_t;
-
-#elif defined(R5900)
-
-   /* PS2 EE */
-   typedef int spx_int32_t;
-   typedef unsigned spx_uint32_t;
-   typedef short spx_int16_t;
-
-#elif defined(__SYMBIAN32__)
-
-   /* Symbian GCC */
-   typedef signed short spx_int16_t;
-   typedef unsigned short spx_uint16_t;
-   typedef signed int spx_int32_t;
-   typedef unsigned int spx_uint32_t;
-
-#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
-
-   typedef short spx_int16_t;
-   typedef unsigned short spx_uint16_t;
-   typedef long spx_int32_t;
-   typedef unsigned long spx_uint32_t;
-
-#elif defined(CONFIG_TI_C6X)
-
-   typedef short spx_int16_t;
-   typedef unsigned short spx_uint16_t;
-   typedef int spx_int32_t;
-   typedef unsigned int spx_uint32_t;
-
-#else
-
-#  include <speex/speex_config_types.h>
-
-#endif
-
-#endif  /* _SPEEX_TYPES_H */