Add libopus 1.0.2 and libopusfile 0.2

1 files changed, 113 insertions, 0 deletions

diff --git a/src/opus-1.0.2/silk/resampler_private_up2_HQ.c b/src/opus-1.0.2/silk/resampler_private_up2_HQ.c
new file mode 100644
index 00000000..9e6dfc9e
--- /dev/null
+++ b/src/opus-1.0.2/silk/resampler_private_up2_HQ.c
@@ -0,0 +1,113 @@
+/***********************************************************************
+Copyright (c) 2006-2011, Skype Limited. All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+- Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+- Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+- Neither the name of Internet Society, IETF or IETF Trust, nor the 
+names of specific contributors, may be used to endorse or promote
+products derived from this software without specific prior written
+permission.
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS”
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+***********************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "SigProc_FIX.h"
+#include "resampler_private.h"
+
+/* Upsample by a factor 2, high quality */
+/* Uses 2nd order allpass filters for the 2x upsampling, followed by a      */
+/* notch filter just above Nyquist.                                         */
+void silk_resampler_private_up2_HQ(
+    opus_int32                      *S,             /* I/O  Resampler state [ 6 ]       */
+    opus_int16                      *out,           /* O    Output signal [ 2 * len ]   */
+    const opus_int16                *in,            /* I    Input signal [ len ]        */
+    opus_int32                      len             /* I    Number of input samples     */
+)
+{
+    opus_int32 k;
+    opus_int32 in32, out32_1, out32_2, Y, X;
+
+    silk_assert( silk_resampler_up2_hq_0[ 0 ] > 0 );
+    silk_assert( silk_resampler_up2_hq_0[ 1 ] > 0 );
+    silk_assert( silk_resampler_up2_hq_0[ 2 ] < 0 );
+    silk_assert( silk_resampler_up2_hq_1[ 0 ] > 0 );
+    silk_assert( silk_resampler_up2_hq_1[ 1 ] > 0 );
+    silk_assert( silk_resampler_up2_hq_1[ 2 ] < 0 );
+
+    /* Internal variables and state are in Q10 format */
+    for( k = 0; k < len; k++ ) {
+        /* Convert to Q10 */
+        in32 = silk_LSHIFT( (opus_int32)in[ k ], 10 );
+
+        /* First all-pass section for even output sample */
+        Y       = silk_SUB32( in32, S[ 0 ] );
+        X       = silk_SMULWB( Y, silk_resampler_up2_hq_0[ 0 ] );
+        out32_1 = silk_ADD32( S[ 0 ], X );
+        S[ 0 ]  = silk_ADD32( in32, X );
+
+        /* Second all-pass section for even output sample */
+        Y       = silk_SUB32( out32_1, S[ 1 ] );
+        X       = silk_SMULWB( Y, silk_resampler_up2_hq_0[ 1 ] );
+        out32_2 = silk_ADD32( S[ 1 ], X );
+        S[ 1 ]  = silk_ADD32( out32_1, X );
+
+        /* Third all-pass section for even output sample */
+        Y       = silk_SUB32( out32_2, S[ 2 ] );
+        X       = silk_SMLAWB( Y, Y, silk_resampler_up2_hq_0[ 2 ] );
+        out32_1 = silk_ADD32( S[ 2 ], X );
+        S[ 2 ]  = silk_ADD32( out32_2, X );
+
+        /* Apply gain in Q15, convert back to int16 and store to output */
+        out[ 2 * k ] = (opus_int16)silk_SAT16( silk_RSHIFT_ROUND( out32_1, 10 ) );
+
+        /* First all-pass section for odd output sample */
+        Y       = silk_SUB32( in32, S[ 3 ] );
+        X       = silk_SMULWB( Y, silk_resampler_up2_hq_1[ 0 ] );
+        out32_1 = silk_ADD32( S[ 3 ], X );
+        S[ 3 ]  = silk_ADD32( in32, X );
+
+        /* Second all-pass section for odd output sample */
+        Y       = silk_SUB32( out32_1, S[ 4 ] );
+        X       = silk_SMULWB( Y, silk_resampler_up2_hq_1[ 1 ] );
+        out32_2 = silk_ADD32( S[ 4 ], X );
+        S[ 4 ]  = silk_ADD32( out32_1, X );
+
+        /* Third all-pass section for odd output sample */
+        Y       = silk_SUB32( out32_2, S[ 5 ] );
+        X       = silk_SMLAWB( Y, Y, silk_resampler_up2_hq_1[ 2 ] );
+        out32_1 = silk_ADD32( S[ 5 ], X );
+        S[ 5 ]  = silk_ADD32( out32_2, X );
+
+        /* Apply gain in Q15, convert back to int16 and store to output */
+        out[ 2 * k + 1 ] = (opus_int16)silk_SAT16( silk_RSHIFT_ROUND( out32_1, 10 ) );
+    }
+}
+
+void silk_resampler_private_up2_HQ_wrapper(
+    void                            *SS,            /* I/O  Resampler state (unused)    */
+    opus_int16                      *out,           /* O    Output signal [ 2 * len ]   */
+    const opus_int16                *in,            /* I    Input signal [ len ]        */
+    opus_int32                      len             /* I    Number of input samples     */
+)
+{
+    silk_resampler_state_struct *S = (silk_resampler_state_struct *)SS;
+    silk_resampler_private_up2_HQ( S->sIIR, out, in, len );
+}