diff options
Diffstat (limited to 'ioq3-r437/src/jpeg-6/jcmaster.c')
| -rw-r--r-- | ioq3-r437/src/jpeg-6/jcmaster.c | 578 |
1 files changed, 0 insertions, 578 deletions
diff --git a/ioq3-r437/src/jpeg-6/jcmaster.c b/ioq3-r437/src/jpeg-6/jcmaster.c deleted file mode 100644 index 84494e62..00000000 --- a/ioq3-r437/src/jpeg-6/jcmaster.c +++ /dev/null @@ -1,578 +0,0 @@ -/* - * jcmaster.c - * - * Copyright (C) 1991-1995, Thomas G. Lane. - * This file is part of the Independent JPEG Group's software. - * For conditions of distribution and use, see the accompanying README file. - * - * This file contains master control logic for the JPEG compressor. - * These routines are concerned with parameter validation, initial setup, - * and inter-pass control (determining the number of passes and the work - * to be done in each pass). - */ - -#define JPEG_INTERNALS -#include "jinclude.h" -#include "jpeglib.h" - - -/* Private state */ - -typedef enum { - main_pass, /* input data, also do first output step */ - huff_opt_pass, /* Huffman code optimization pass */ - output_pass /* data output pass */ -} c_pass_type; - -typedef struct { - struct jpeg_comp_master pub; /* public fields */ - - c_pass_type pass_type; /* the type of the current pass */ - - int pass_number; /* # of passes completed */ - int total_passes; /* total # of passes needed */ - - int scan_number; /* current index in scan_info[] */ -} my_comp_master; - -typedef my_comp_master * my_master_ptr; - - -/* - * Support routines that do various essential calculations. - */ - -LOCAL void -initial_setup (j_compress_ptr cinfo) -/* Do computations that are needed before master selection phase */ -{ - int ci; - jpeg_component_info *compptr; - long samplesperrow; - JDIMENSION jd_samplesperrow; - - /* Sanity check on image dimensions */ - if (cinfo->image_height <= 0 || cinfo->image_width <= 0 - || cinfo->num_components <= 0 || cinfo->input_components <= 0) - ERREXIT(cinfo, JERR_EMPTY_IMAGE); - - /* Make sure image isn't bigger than I can handle */ - if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || - (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) - ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); - - /* Width of an input scanline must be representable as JDIMENSION. */ - samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; - jd_samplesperrow = (JDIMENSION) samplesperrow; - if ((long) jd_samplesperrow != samplesperrow) - ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); - - /* For now, precision must match compiled-in value... */ - if (cinfo->data_precision != BITS_IN_JSAMPLE) - ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); - - /* Check that number of components won't exceed internal array sizes */ - if (cinfo->num_components > MAX_COMPONENTS) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPONENTS); - - /* Compute maximum sampling factors; check factor validity */ - cinfo->max_h_samp_factor = 1; - cinfo->max_v_samp_factor = 1; - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || - compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) - ERREXIT(cinfo, JERR_BAD_SAMPLING); - cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, - compptr->h_samp_factor); - cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, - compptr->v_samp_factor); - } - - /* Compute dimensions of components */ - for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; - ci++, compptr++) { - /* Fill in the correct component_index value; don't rely on application */ - compptr->component_index = ci; - /* For compression, we never do DCT scaling. */ - compptr->DCT_scaled_size = DCTSIZE; - /* Size in DCT blocks */ - compptr->width_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) (cinfo->max_h_samp_factor * DCTSIZE)); - compptr->height_in_blocks = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) (cinfo->max_v_samp_factor * DCTSIZE)); - /* Size in samples */ - compptr->downsampled_width = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, - (long) cinfo->max_h_samp_factor); - compptr->downsampled_height = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, - (long) cinfo->max_v_samp_factor); - /* Mark component needed (this flag isn't actually used for compression) */ - compptr->component_needed = TRUE; - } - - /* Compute number of fully interleaved MCU rows (number of times that - * main controller will call coefficient controller). - */ - cinfo->total_iMCU_rows = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); -} - - -#ifdef C_MULTISCAN_FILES_SUPPORTED - -LOCAL void -validate_script (j_compress_ptr cinfo) -/* Verify that the scan script in cinfo->scan_info[] is valid; also - * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. - */ -{ - const jpeg_scan_info * scanptr; - int scanno, ncomps, ci, coefi, thisi; - int Ss, Se, Ah, Al; - boolean component_sent[MAX_COMPONENTS]; -#ifdef C_PROGRESSIVE_SUPPORTED - int * last_bitpos_ptr; - int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; - /* -1 until that coefficient has been seen; then last Al for it */ -#endif - - if (cinfo->num_scans <= 0) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); - - /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; - * for progressive JPEG, no scan can have this. - */ - scanptr = cinfo->scan_info; - if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { -#ifdef C_PROGRESSIVE_SUPPORTED - cinfo->progressive_mode = TRUE; - last_bitpos_ptr = & last_bitpos[0][0]; - for (ci = 0; ci < cinfo->num_components; ci++) - for (coefi = 0; coefi < DCTSIZE2; coefi++) - *last_bitpos_ptr++ = -1; -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - for (ci = 0; ci < cinfo->num_components; ci++) - component_sent[ci] = FALSE; - } - - for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { - /* Validate component indexes */ - ncomps = scanptr->comps_in_scan; - if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (thisi < 0 || thisi >= cinfo->num_components) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - /* Components must appear in SOF order within each scan */ - if (ci > 0 && thisi <= scanptr->component_index[ci-1]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - } - /* Validate progression parameters */ - Ss = scanptr->Ss; - Se = scanptr->Se; - Ah = scanptr->Ah; - Al = scanptr->Al; - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || - Ah < 0 || Ah > 13 || Al < 0 || Al > 13) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - if (Ss == 0) { - if (Se != 0) /* DC and AC together not OK */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - if (ncomps != 1) /* AC scans must be for only one component */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - for (ci = 0; ci < ncomps; ci++) { - last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; - if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - for (coefi = Ss; coefi <= Se; coefi++) { - if (last_bitpos_ptr[coefi] < 0) { - /* first scan of this coefficient */ - if (Ah != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } else { - /* not first scan */ - if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - } - last_bitpos_ptr[coefi] = Al; - } - } -#endif - } else { - /* For sequential JPEG, all progression parameters must be these: */ - if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) - ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); - /* Make sure components are not sent twice */ - for (ci = 0; ci < ncomps; ci++) { - thisi = scanptr->component_index[ci]; - if (component_sent[thisi]) - ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); - component_sent[thisi] = TRUE; - } - } - } - - /* Now verify that everything got sent. */ - if (cinfo->progressive_mode) { -#ifdef C_PROGRESSIVE_SUPPORTED - /* For progressive mode, we only check that at least some DC data - * got sent for each component; the spec does not require that all bits - * of all coefficients be transmitted. Would it be wiser to enforce - * transmission of all coefficient bits?? - */ - for (ci = 0; ci < cinfo->num_components; ci++) { - if (last_bitpos[ci][0] < 0) - ERREXIT(cinfo, JERR_MISSING_DATA); - } -#endif - } else { - for (ci = 0; ci < cinfo->num_components; ci++) { - if (! component_sent[ci]) - ERREXIT(cinfo, JERR_MISSING_DATA); - } - } -} - -#endif /* C_MULTISCAN_FILES_SUPPORTED */ - - -LOCAL void -select_scan_parameters (j_compress_ptr cinfo) -/* Set up the scan parameters for the current scan */ -{ - int ci; - -#ifdef C_MULTISCAN_FILES_SUPPORTED - if (cinfo->scan_info != NULL) { - /* Prepare for current scan --- the script is already validated */ - my_master_ptr master = (my_master_ptr) cinfo->master; - const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; - - cinfo->comps_in_scan = scanptr->comps_in_scan; - for (ci = 0; ci < scanptr->comps_in_scan; ci++) { - cinfo->cur_comp_info[ci] = - &cinfo->comp_info[scanptr->component_index[ci]]; - } - cinfo->Ss = scanptr->Ss; - cinfo->Se = scanptr->Se; - cinfo->Ah = scanptr->Ah; - cinfo->Al = scanptr->Al; - } - else -#endif - { - /* Prepare for single sequential-JPEG scan containing all components */ - if (cinfo->num_components > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, - MAX_COMPS_IN_SCAN); - cinfo->comps_in_scan = cinfo->num_components; - for (ci = 0; ci < cinfo->num_components; ci++) { - cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; - } - cinfo->Ss = 0; - cinfo->Se = DCTSIZE2-1; - cinfo->Ah = 0; - cinfo->Al = 0; - } -} - - -LOCAL void -per_scan_setup (j_compress_ptr cinfo) -/* Do computations that are needed before processing a JPEG scan */ -/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ -{ - int ci, mcublks, tmp; - jpeg_component_info *compptr; - - if (cinfo->comps_in_scan == 1) { - - /* Noninterleaved (single-component) scan */ - compptr = cinfo->cur_comp_info[0]; - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = compptr->width_in_blocks; - cinfo->MCU_rows_in_scan = compptr->height_in_blocks; - - /* For noninterleaved scan, always one block per MCU */ - compptr->MCU_width = 1; - compptr->MCU_height = 1; - compptr->MCU_blocks = 1; - compptr->MCU_sample_width = DCTSIZE; - compptr->last_col_width = 1; - /* For noninterleaved scans, it is convenient to define last_row_height - * as the number of block rows present in the last iMCU row. - */ - tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); - if (tmp == 0) tmp = compptr->v_samp_factor; - compptr->last_row_height = tmp; - - /* Prepare array describing MCU composition */ - cinfo->blocks_in_MCU = 1; - cinfo->MCU_membership[0] = 0; - - } else { - - /* Interleaved (multi-component) scan */ - if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) - ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, - MAX_COMPS_IN_SCAN); - - /* Overall image size in MCUs */ - cinfo->MCUs_per_row = (JDIMENSION) - jdiv_round_up((long) cinfo->image_width, - (long) (cinfo->max_h_samp_factor*DCTSIZE)); - cinfo->MCU_rows_in_scan = (JDIMENSION) - jdiv_round_up((long) cinfo->image_height, - (long) (cinfo->max_v_samp_factor*DCTSIZE)); - - cinfo->blocks_in_MCU = 0; - - for (ci = 0; ci < cinfo->comps_in_scan; ci++) { - compptr = cinfo->cur_comp_info[ci]; - /* Sampling factors give # of blocks of component in each MCU */ - compptr->MCU_width = compptr->h_samp_factor; - compptr->MCU_height = compptr->v_samp_factor; - compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; - compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE; - /* Figure number of non-dummy blocks in last MCU column & row */ - tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); - if (tmp == 0) tmp = compptr->MCU_width; - compptr->last_col_width = tmp; - tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); - if (tmp == 0) tmp = compptr->MCU_height; - compptr->last_row_height = tmp; - /* Prepare array describing MCU composition */ - mcublks = compptr->MCU_blocks; - if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) - ERREXIT(cinfo, JERR_BAD_MCU_SIZE); - while (mcublks-- > 0) { - cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; - } - } - - } - - /* Convert restart specified in rows to actual MCU count. */ - /* Note that count must fit in 16 bits, so we provide limiting. */ - if (cinfo->restart_in_rows > 0) { - long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; - cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); - } -} - - -/* - * Per-pass setup. - * This is called at the beginning of each pass. We determine which modules - * will be active during this pass and give them appropriate start_pass calls. - * We also set is_last_pass to indicate whether any more passes will be - * required. - */ - -METHODDEF void -prepare_for_pass (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - switch (master->pass_type) { - case main_pass: - /* Initial pass: will collect input data, and do either Huffman - * optimization or data output for the first scan. - */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (! cinfo->raw_data_in) { - (*cinfo->cconvert->start_pass) (cinfo); - (*cinfo->downsample->start_pass) (cinfo); - (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); - } - (*cinfo->fdct->start_pass) (cinfo); - (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); - (*cinfo->coef->start_pass) (cinfo, - (master->total_passes > 1 ? - JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); - (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); - if (cinfo->optimize_coding) { - /* No immediate data output; postpone writing frame/scan headers */ - master->pub.call_pass_startup = FALSE; - } else { - /* Will write frame/scan headers at first jpeg_write_scanlines call */ - master->pub.call_pass_startup = TRUE; - } - break; -#ifdef ENTROPY_OPT_SUPPORTED - case huff_opt_pass: - /* Do Huffman optimization for a scan after the first one. */ - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) { - (*cinfo->entropy->start_pass) (cinfo, TRUE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - master->pub.call_pass_startup = FALSE; - break; - } - /* Special case: Huffman DC refinement scans need no Huffman table - * and therefore we can skip the optimization pass for them. - */ - master->pass_type = output_pass; - master->pass_number++; - /*FALLTHROUGH*/ -#endif - case output_pass: - /* Do a data-output pass. */ - /* We need not repeat per-scan setup if prior optimization pass did it. */ - if (! cinfo->optimize_coding) { - select_scan_parameters(cinfo); - per_scan_setup(cinfo); - } - (*cinfo->entropy->start_pass) (cinfo, FALSE); - (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); - /* We emit frame/scan headers now */ - if (master->scan_number == 0) - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); - master->pub.call_pass_startup = FALSE; - break; - default: - ERREXIT(cinfo, JERR_NOT_COMPILED); - } - - master->pub.is_last_pass = (master->pass_number == master->total_passes-1); - - /* Set up progress monitor's pass info if present */ - if (cinfo->progress != NULL) { - cinfo->progress->completed_passes = master->pass_number; - cinfo->progress->total_passes = master->total_passes; - } -} - - -/* - * Special start-of-pass hook. - * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. - * In single-pass processing, we need this hook because we don't want to - * write frame/scan headers during jpeg_start_compress; we want to let the - * application write COM markers etc. between jpeg_start_compress and the - * jpeg_write_scanlines loop. - * In multi-pass processing, this routine is not used. - */ - -METHODDEF void -pass_startup (j_compress_ptr cinfo) -{ - cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ - - (*cinfo->marker->write_frame_header) (cinfo); - (*cinfo->marker->write_scan_header) (cinfo); -} - - -/* - * Finish up at end of pass. - */ - -METHODDEF void -finish_pass_master (j_compress_ptr cinfo) -{ - my_master_ptr master = (my_master_ptr) cinfo->master; - - /* The entropy coder always needs an end-of-pass call, - * either to analyze statistics or to flush its output buffer. - */ - (*cinfo->entropy->finish_pass) (cinfo); - - /* Update state for next pass */ - switch (master->pass_type) { - case main_pass: - /* next pass is either output of scan 0 (after optimization) - * or output of scan 1 (if no optimization). - */ - master->pass_type = output_pass; - if (! cinfo->optimize_coding) - master->scan_number++; - break; - case huff_opt_pass: - /* next pass is always output of current scan */ - master->pass_type = output_pass; - break; - case output_pass: - /* next pass is either optimization or output of next scan */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - master->scan_number++; - break; - } - - master->pass_number++; -} - - -/* - * Initialize master compression control. - */ - -GLOBAL void -jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) -{ - my_master_ptr master; - - master = (my_master_ptr) - (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, - SIZEOF(my_comp_master)); - cinfo->master = (struct jpeg_comp_master *) master; - master->pub.prepare_for_pass = prepare_for_pass; - master->pub.pass_startup = pass_startup; - master->pub.finish_pass = finish_pass_master; - master->pub.is_last_pass = FALSE; - - /* Validate parameters, determine derived values */ - initial_setup(cinfo); - - if (cinfo->scan_info != NULL) { -#ifdef C_MULTISCAN_FILES_SUPPORTED - validate_script(cinfo); -#else - ERREXIT(cinfo, JERR_NOT_COMPILED); -#endif - } else { - cinfo->progressive_mode = FALSE; - cinfo->num_scans = 1; - } - - if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */ - cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */ - - /* Initialize my private state */ - if (transcode_only) { - /* no main pass in transcoding */ - if (cinfo->optimize_coding) - master->pass_type = huff_opt_pass; - else - master->pass_type = output_pass; - } else { - /* for normal compression, first pass is always this type: */ - master->pass_type = main_pass; - } - master->scan_number = 0; - master->pass_number = 0; - if (cinfo->optimize_coding) - master->total_passes = cinfo->num_scans * 2; - else - master->total_passes = cinfo->num_scans; -} |