1 files changed, 358 insertions, 0 deletions
diff --git a/src/jpeg-8c/jcprepct.c b/src/jpeg-8c/jcprepct.c
new file mode 100644
index 00000000..be44cc4b
--- /dev/null
+++ b/src/jpeg-8c/jcprepct.c
@@ -0,0 +1,358 @@
+/*
+ * jcprepct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the compression preprocessing controller.
+ * This controller manages the color conversion, downsampling,
+ * and edge expansion steps.
+ *
+ * Most of the complexity here is associated with buffering input rows
+ * as required by the downsampler.  See the comments at the head of
+ * jcsample.c for the downsampler's needs.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* At present, jcsample.c can request context rows only for smoothing.
+ * In the future, we might also need context rows for CCIR601 sampling
+ * or other more-complex downsampling procedures.  The code to support
+ * context rows should be compiled only if needed.
+ */
+#ifdef INPUT_SMOOTHING_SUPPORTED
+#define CONTEXT_ROWS_SUPPORTED
+#endif
+
+
+/*
+ * For the simple (no-context-row) case, we just need to buffer one
+ * row group's worth of pixels for the downsampling step.  At the bottom of
+ * the image, we pad to a full row group by replicating the last pixel row.
+ * The downsampler's last output row is then replicated if needed to pad
+ * out to a full iMCU row.
+ *
+ * When providing context rows, we must buffer three row groups' worth of
+ * pixels.  Three row groups are physically allocated, but the row pointer
+ * arrays are made five row groups high, with the extra pointers above and
+ * below "wrapping around" to point to the last and first real row groups.
+ * This allows the downsampler to access the proper context rows.
+ * At the top and bottom of the image, we create dummy context rows by
+ * copying the first or last real pixel row.  This copying could be avoided
+ * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the
+ * trouble on the compression side.
+ */
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_prep_controller pub; /* public fields */
+
+  /* Downsampling input buffer.  This buffer holds color-converted data
+   * until we have enough to do a downsample step.
+   */
+  JSAMPARRAY color_buf[MAX_COMPONENTS];
+
+  JDIMENSION rows_to_go;	/* counts rows remaining in source image */
+  int next_buf_row;		/* index of next row to store in color_buf */
+
+#ifdef CONTEXT_ROWS_SUPPORTED	/* only needed for context case */
+  int this_row_group;		/* starting row index of group to process */
+  int next_buf_stop;		/* downsample when we reach this index */
+#endif
+} my_prep_controller;
+
+typedef my_prep_controller * my_prep_ptr;
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+
+  if (pass_mode != JBUF_PASS_THRU)
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  /* Initialize total-height counter for detecting bottom of image */
+  prep->rows_to_go = cinfo->image_height;
+  /* Mark the conversion buffer empty */
+  prep->next_buf_row = 0;
+#ifdef CONTEXT_ROWS_SUPPORTED
+  /* Preset additional state variables for context mode.
+   * These aren't used in non-context mode, so we needn't test which mode.
+   */
+  prep->this_row_group = 0;
+  /* Set next_buf_stop to stop after two row groups have been read in. */
+  prep->next_buf_stop = 2 * cinfo->max_v_samp_factor;
+#endif
+}
+
+
+/*
+ * Expand an image vertically from height input_rows to height output_rows,
+ * by duplicating the bottom row.
+ */
+
+LOCAL(void)
+expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols,
+		    int input_rows, int output_rows)
+{
+  register int row;
+
+  for (row = input_rows; row < output_rows; row++) {
+    jcopy_sample_rows(image_data, input_rows-1, image_data, row,
+		      1, num_cols);
+  }
+}
+
+
+/*
+ * Process some data in the simple no-context case.
+ *
+ * Preprocessor output data is counted in "row groups".  A row group
+ * is defined to be v_samp_factor sample rows of each component.
+ * Downsampling will produce this much data from each max_v_samp_factor
+ * input rows.
+ */
+
+METHODDEF(void)
+pre_process_data (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+		  JDIMENSION in_rows_avail,
+		  JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
+		  JDIMENSION out_row_groups_avail)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int numrows, ci;
+  JDIMENSION inrows;
+  jpeg_component_info * compptr;
+
+  while (*in_row_ctr < in_rows_avail &&
+	 *out_row_group_ctr < out_row_groups_avail) {
+    /* Do color conversion to fill the conversion buffer. */
+    inrows = in_rows_avail - *in_row_ctr;
+    numrows = cinfo->max_v_samp_factor - prep->next_buf_row;
+    numrows = (int) MIN((JDIMENSION) numrows, inrows);
+    (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
+				       prep->color_buf,
+				       (JDIMENSION) prep->next_buf_row,
+				       numrows);
+    *in_row_ctr += numrows;
+    prep->next_buf_row += numrows;
+    prep->rows_to_go -= numrows;
+    /* If at bottom of image, pad to fill the conversion buffer. */
+    if (prep->rows_to_go == 0 &&
+	prep->next_buf_row < cinfo->max_v_samp_factor) {
+      for (ci = 0; ci < cinfo->num_components; ci++) {
+	expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
+			   prep->next_buf_row, cinfo->max_v_samp_factor);
+      }
+      prep->next_buf_row = cinfo->max_v_samp_factor;
+    }
+    /* If we've filled the conversion buffer, empty it. */
+    if (prep->next_buf_row == cinfo->max_v_samp_factor) {
+      (*cinfo->downsample->downsample) (cinfo,
+					prep->color_buf, (JDIMENSION) 0,
+					output_buf, *out_row_group_ctr);
+      prep->next_buf_row = 0;
+      (*out_row_group_ctr)++;
+    }
+    /* If at bottom of image, pad the output to a full iMCU height.
+     * Note we assume the caller is providing a one-iMCU-height output buffer!
+     */
+    if (prep->rows_to_go == 0 &&
+	*out_row_group_ctr < out_row_groups_avail) {
+      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	   ci++, compptr++) {
+	numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
+	expand_bottom_edge(output_buf[ci],
+			   compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+			   (int) (*out_row_group_ctr * numrows),
+			   (int) (out_row_groups_avail * numrows));
+      }
+      *out_row_group_ctr = out_row_groups_avail;
+      break;			/* can exit outer loop without test */
+    }
+  }
+}
+
+
+#ifdef CONTEXT_ROWS_SUPPORTED
+
+/*
+ * Process some data in the context case.
+ */
+
+METHODDEF(void)
+pre_process_context (j_compress_ptr cinfo,
+		     JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+		     JDIMENSION in_rows_avail,
+		     JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
+		     JDIMENSION out_row_groups_avail)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int numrows, ci;
+  int buf_height = cinfo->max_v_samp_factor * 3;
+  JDIMENSION inrows;
+
+  while (*out_row_group_ctr < out_row_groups_avail) {
+    if (*in_row_ctr < in_rows_avail) {
+      /* Do color conversion to fill the conversion buffer. */
+      inrows = in_rows_avail - *in_row_ctr;
+      numrows = prep->next_buf_stop - prep->next_buf_row;
+      numrows = (int) MIN((JDIMENSION) numrows, inrows);
+      (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
+					 prep->color_buf,
+					 (JDIMENSION) prep->next_buf_row,
+					 numrows);
+      /* Pad at top of image, if first time through */
+      if (prep->rows_to_go == cinfo->image_height) {
+	for (ci = 0; ci < cinfo->num_components; ci++) {
+	  int row;
+	  for (row = 1; row <= cinfo->max_v_samp_factor; row++) {
+	    jcopy_sample_rows(prep->color_buf[ci], 0,
+			      prep->color_buf[ci], -row,
+			      1, cinfo->image_width);
+	  }
+	}
+      }
+      *in_row_ctr += numrows;
+      prep->next_buf_row += numrows;
+      prep->rows_to_go -= numrows;
+    } else {
+      /* Return for more data, unless we are at the bottom of the image. */
+      if (prep->rows_to_go != 0)
+	break;
+      /* When at bottom of image, pad to fill the conversion buffer. */
+      if (prep->next_buf_row < prep->next_buf_stop) {
+	for (ci = 0; ci < cinfo->num_components; ci++) {
+	  expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
+			     prep->next_buf_row, prep->next_buf_stop);
+	}
+	prep->next_buf_row = prep->next_buf_stop;
+      }
+    }
+    /* If we've gotten enough data, downsample a row group. */
+    if (prep->next_buf_row == prep->next_buf_stop) {
+      (*cinfo->downsample->downsample) (cinfo,
+					prep->color_buf,
+					(JDIMENSION) prep->this_row_group,
+					output_buf, *out_row_group_ctr);
+      (*out_row_group_ctr)++;
+      /* Advance pointers with wraparound as necessary. */
+      prep->this_row_group += cinfo->max_v_samp_factor;
+      if (prep->this_row_group >= buf_height)
+	prep->this_row_group = 0;
+      if (prep->next_buf_row >= buf_height)
+	prep->next_buf_row = 0;
+      prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor;
+    }
+  }
+}
+
+
+/*
+ * Create the wrapped-around downsampling input buffer needed for context mode.
+ */
+
+LOCAL(void)
+create_context_buffer (j_compress_ptr cinfo)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int rgroup_height = cinfo->max_v_samp_factor;
+  int ci, i;
+  jpeg_component_info * compptr;
+  JSAMPARRAY true_buffer, fake_buffer;
+
+  /* Grab enough space for fake row pointers for all the components;
+   * we need five row groups' worth of pointers for each component.
+   */
+  fake_buffer = (JSAMPARRAY)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(cinfo->num_components * 5 * rgroup_height) *
+				SIZEOF(JSAMPROW));
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate the actual buffer space (3 row groups) for this component.
+     * We make the buffer wide enough to allow the downsampler to edge-expand
+     * horizontally within the buffer, if it so chooses.
+     */
+    true_buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) (((long) compptr->width_in_blocks *
+		      cinfo->min_DCT_h_scaled_size *
+		      cinfo->max_h_samp_factor) / compptr->h_samp_factor),
+       (JDIMENSION) (3 * rgroup_height));
+    /* Copy true buffer row pointers into the middle of the fake row array */
+    MEMCOPY(fake_buffer + rgroup_height, true_buffer,
+	    3 * rgroup_height * SIZEOF(JSAMPROW));
+    /* Fill in the above and below wraparound pointers */
+    for (i = 0; i < rgroup_height; i++) {
+      fake_buffer[i] = true_buffer[2 * rgroup_height + i];
+      fake_buffer[4 * rgroup_height + i] = true_buffer[i];
+    }
+    prep->color_buf[ci] = fake_buffer + rgroup_height;
+    fake_buffer += 5 * rgroup_height; /* point to space for next component */
+  }
+}
+
+#endif /* CONTEXT_ROWS_SUPPORTED */
+
+
+/*
+ * Initialize preprocessing controller.
+ */
+
+GLOBAL(void)
+jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_prep_ptr prep;
+  int ci;
+  jpeg_component_info * compptr;
+
+  if (need_full_buffer)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  prep = (my_prep_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_prep_controller));
+  cinfo->prep = (struct jpeg_c_prep_controller *) prep;
+  prep->pub.start_pass = start_pass_prep;
+
+  /* Allocate the color conversion buffer.
+   * We make the buffer wide enough to allow the downsampler to edge-expand
+   * horizontally within the buffer, if it so chooses.
+   */
+  if (cinfo->downsample->need_context_rows) {
+    /* Set up to provide context rows */
+#ifdef CONTEXT_ROWS_SUPPORTED
+    prep->pub.pre_process_data = pre_process_context;
+    create_context_buffer(cinfo);
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    /* No context, just make it tall enough for one row group */
+    prep->pub.pre_process_data = pre_process_data;
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      prep->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 (JDIMENSION) (((long) compptr->width_in_blocks *
+			cinfo->min_DCT_h_scaled_size *
+			cinfo->max_h_samp_factor) / compptr->h_samp_factor),
+	 (JDIMENSION) cinfo->max_v_samp_factor);
+    }
+  }
+}