diff options
Diffstat (limited to 'src/jpeg-8c/jddctmgr.c')
| -rw-r--r-- | src/jpeg-8c/jddctmgr.c | 384 |
1 files changed, 384 insertions, 0 deletions
diff --git a/src/jpeg-8c/jddctmgr.c b/src/jpeg-8c/jddctmgr.c new file mode 100644 index 00000000..0ded9d57 --- /dev/null +++ b/src/jpeg-8c/jddctmgr.c @@ -0,0 +1,384 @@ +/* + * jddctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2002-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 2): + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 3): + method_ptr = jpeg_idct_3x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 4): + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 5): + method_ptr = jpeg_idct_5x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 6): + method_ptr = jpeg_idct_6x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 7): + method_ptr = jpeg_idct_7x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((9 << 8) + 9): + method_ptr = jpeg_idct_9x9; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 10): + method_ptr = jpeg_idct_10x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((11 << 8) + 11): + method_ptr = jpeg_idct_11x11; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 12): + method_ptr = jpeg_idct_12x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((13 << 8) + 13): + method_ptr = jpeg_idct_13x13; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 14): + method_ptr = jpeg_idct_14x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((15 << 8) + 15): + method_ptr = jpeg_idct_15x15; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 16): + method_ptr = jpeg_idct_16x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 8): + method_ptr = jpeg_idct_16x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 7): + method_ptr = jpeg_idct_14x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 6): + method_ptr = jpeg_idct_12x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 5): + method_ptr = jpeg_idct_10x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 4): + method_ptr = jpeg_idct_8x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 3): + method_ptr = jpeg_idct_6x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 2): + method_ptr = jpeg_idct_4x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 1): + method_ptr = jpeg_idct_2x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 16): + method_ptr = jpeg_idct_8x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 14): + method_ptr = jpeg_idct_7x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 12): + method_ptr = jpeg_idct_6x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 10): + method_ptr = jpeg_idct_5x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 8): + method_ptr = jpeg_idct_4x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 6): + method_ptr = jpeg_idct_3x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 4): + method_ptr = jpeg_idct_2x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((1 << 8) + 2): + method_ptr = jpeg_idct_1x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored as ints to ensure access efficiency. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 1/8. + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * 0.125); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL(void) +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = (struct jpeg_inverse_dct *) idct; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} |