diff options
Diffstat (limited to 'src/opus-1.0.2/include/opus_custom.h')
| -rw-r--r-- | src/opus-1.0.2/include/opus_custom.h | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/src/opus-1.0.2/include/opus_custom.h b/src/opus-1.0.2/include/opus_custom.h new file mode 100644 index 00000000..e7861d6f --- /dev/null +++ b/src/opus-1.0.2/include/opus_custom.h @@ -0,0 +1,329 @@ +/* Copyright (c) 2007-2008 CSIRO + Copyright (c) 2007-2009 Xiph.Org Foundation + Copyright (c) 2008-2012 Gregory Maxwell + Written by Jean-Marc Valin and Gregory Maxwell */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER + OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +/** + @file opus_custom.h + @brief Opus-Custom reference implementation API + */ + +#ifndef OPUS_CUSTOM_H +#define OPUS_CUSTOM_H + +#include "opus_defines.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef CUSTOM_MODES +#define OPUS_CUSTOM_EXPORT OPUS_EXPORT +#define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT +#else +#define OPUS_CUSTOM_EXPORT +#ifdef CELT_C +#define OPUS_CUSTOM_EXPORT_STATIC static inline +#else +#define OPUS_CUSTOM_EXPORT_STATIC +#endif +#endif + +/** @defgroup opus_custom Opus Custom + * @{ + * Opus Custom is an optional part of the Opus specification and + * reference implementation which uses a distinct API from the regular + * API and supports frame sizes that are not normally supported.\ Use + * of Opus Custom is discouraged for all but very special applications + * for which a frame size different from 2.5, 5, 10, or 20 ms is needed + * (for either complexity or latency reasons) and where interoperability + * is less important. + * + * In addition to the interoperability limitations the use of Opus custom + * disables a substantial chunk of the codec and generally lowers the + * quality available at a given bitrate. Normally when an application needs + * a different frame size from the codec it should buffer to match the + * sizes but this adds a small amount of delay which may be important + * in some very low latency applications. Some transports (especially + * constant rate RF transports) may also work best with frames of + * particular durations. + * + * Libopus only supports custom modes if they are enabled at compile time. + * + * The Opus Custom API is similar to the regular API but the + * @ref opus_encoder_create and @ref opus_decoder_create calls take + * an additional mode parameter which is a structure produced by + * a call to @ref opus_custom_mode_create. Both the encoder and decoder + * must create a mode using the same sample rate (fs) and frame size + * (frame size) so these parameters must either be signaled out of band + * or fixed in a particular implementation. + * + * Similar to regular Opus the custom modes support on the fly frame size + * switching, but the sizes available depend on the particular frame size in + * use. For some initial frame sizes on a single on the fly size is available. + */ + +/** Contains the state of an encoder. One encoder state is needed + for each stream. It is initialized once at the beginning of the + stream. Do *not* re-initialize the state for every frame. + @brief Encoder state + */ +typedef struct OpusCustomEncoder OpusCustomEncoder; + +/** State of the decoder. One decoder state is needed for each stream. + It is initialized once at the beginning of the stream. Do *not* + re-initialize the state for every frame. + @brief Decoder state + */ +typedef struct OpusCustomDecoder OpusCustomDecoder; + +/** The mode contains all the information necessary to create an + encoder. Both the encoder and decoder need to be initialized + with exactly the same mode, otherwise the output will be + corrupted. + @brief Mode configuration + */ +typedef struct OpusCustomMode OpusCustomMode; + +/** Creates a new mode struct. This will be passed to an encoder or + * decoder. The mode MUST NOT BE DESTROYED until the encoders and + * decoders that use it are destroyed as well. + * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz) + * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each + * packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes) + * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned) + * @return A newly created mode + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error); + +/** Destroys a mode struct. Only call this after all encoders and + * decoders using this mode are destroyed as well. + * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed. + */ +OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode); + +/* Encoder */ +/** Gets the size of an OpusCustomEncoder structure. + * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration + * @param [in] channels <tt>int</tt>: Number of channels + * @returns size + */ +OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size( + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1); + +/** Creates a new encoder state. Each stream needs its own encoder + * state (can't be shared across simultaneous streams). + * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of + * the stream (must be the same characteristics as used for the + * decoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @param [out] error <tt>int*</tt>: Returns an error code + * @return Newly created encoder state. +*/ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create( + const OpusCustomMode *mode, + int channels, + int *error +) OPUS_ARG_NONNULL(1); + +/** Initializes a previously allocated encoder state + * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size. + * This is intended for applications which use their own allocator instead of malloc. + * @see opus_custom_encoder_create(),opus_custom_encoder_get_size() + * To reset a previously initialized state use the OPUS_RESET_STATE CTL. + * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state + * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of + * the stream (must be the same characteristics as used for the + * decoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @return OPUS_OK Success or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT_STATIC int opus_custom_encoder_init( + OpusCustomEncoder *st, + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); + +/** Destroys a an encoder state. + * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed. + */ +OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st); + +/** Encodes a frame of audio. + * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state + * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0. + * Samples with a range beyond +/-1.0 are supported but will + * be clipped by decoders using the integer API and should + * only be used if it is known that the far end supports + * extended dynamic range. There must be exactly + * frame_size samples per channel. + * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal + * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. + * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame + * (can change from one frame to another) + * @return Number of bytes written to "compressed". + * If negative, an error has occurred (see error codes). It is IMPORTANT that + * the length returned be somehow transmitted to the decoder. Otherwise, no + * decoding is possible. + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float( + OpusCustomEncoder *st, + const float *pcm, + int frame_size, + unsigned char *compressed, + int maxCompressedBytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Encodes a frame of audio. + * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state + * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian). + * There must be exactly frame_size samples per channel. + * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal + * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. + * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame + * (can change from one frame to another) + * @return Number of bytes written to "compressed". + * If negative, an error has occurred (see error codes). It is IMPORTANT that + * the length returned be somehow transmitted to the decoder. Otherwise, no + * decoding is possible. + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode( + OpusCustomEncoder *st, + const opus_int16 *pcm, + int frame_size, + unsigned char *compressed, + int maxCompressedBytes +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on an Opus custom encoder. + * + * Generally the request and subsequent arguments are generated + * by a convenience macro. + * @see opus_encoderctls + */ +OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); + +/* Decoder */ + +/** Gets the size of an OpusCustomDecoder structure. + * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration + * @param [in] channels <tt>int</tt>: Number of channels + * @returns size + */ +OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size( + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1); + +/** Creates a new decoder state. Each stream needs its own decoder state (can't + * be shared across simultaneous streams). + * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the + * stream (must be the same characteristics as used for the encoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @param [out] error <tt>int*</tt>: Returns an error code + * @return Newly created decoder state. + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create( + const OpusCustomMode *mode, + int channels, + int *error +) OPUS_ARG_NONNULL(1); + +/** Initializes a previously allocated decoder state + * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size. + * This is intended for applications which use their own allocator instead of malloc. + * @see opus_custom_decoder_create(),opus_custom_decoder_get_size() + * To reset a previously initialized state use the OPUS_RESET_STATE CTL. + * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state + * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of + * the stream (must be the same characteristics as used for the + * encoder) + * @param [in] channels <tt>int</tt>: Number of channels + * @return OPUS_OK Success or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init( + OpusCustomDecoder *st, + const OpusCustomMode *mode, + int channels +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); + +/** Destroys a an decoder state. + * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed. + */ +OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st); + +/** Decode an opus custom frame with floating point output + * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state + * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss + * @param [in] len <tt>int</tt>: Number of bytes in payload + * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length + * is frame_size*channels*sizeof(float) + * @param [in] frame_size Number of samples per channel of available space in *pcm. + * @returns Number of decoded samples or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float( + OpusCustomDecoder *st, + const unsigned char *data, + int len, + float *pcm, + int frame_size +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Decode an opus custom frame + * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state + * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss + * @param [in] len <tt>int</tt>: Number of bytes in payload + * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length + * is frame_size*channels*sizeof(opus_int16) + * @param [in] frame_size Number of samples per channel of available space in *pcm. + * @returns Number of decoded samples or @ref opus_errorcodes + */ +OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode( + OpusCustomDecoder *st, + const unsigned char *data, + int len, + opus_int16 *pcm, + int frame_size +) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); + +/** Perform a CTL function on an Opus custom decoder. + * + * Generally the request and subsequent arguments are generated + * by a convenience macro. + * @see opus_genericctls + */ +OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* OPUS_CUSTOM_H */ |