diff options
Diffstat (limited to 'src/opus-1.1/include/opus_multistream.h')
| -rw-r--r-- | src/opus-1.1/include/opus_multistream.h | 660 |
1 files changed, 0 insertions, 660 deletions
diff --git a/src/opus-1.1/include/opus_multistream.h b/src/opus-1.1/include/opus_multistream.h deleted file mode 100644 index ae599793..00000000 --- a/src/opus-1.1/include/opus_multistream.h +++ /dev/null @@ -1,660 +0,0 @@ -/* Copyright (c) 2011 Xiph.Org Foundation - Written by Jean-Marc Valin */ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER - OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -/** - * @file opus_multistream.h - * @brief Opus reference implementation multistream API - */ - -#ifndef OPUS_MULTISTREAM_H -#define OPUS_MULTISTREAM_H - -#include "opus.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/** @cond OPUS_INTERNAL_DOC */ - -/** Macros to trigger compilation errors when the wrong types are provided to a - * CTL. */ -/**@{*/ -#define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr))) -#define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr))) -/**@}*/ - -/** These are the actual encoder and decoder CTL ID numbers. - * They should not be used directly by applications. - * In general, SETs should be even and GETs should be odd.*/ -/**@{*/ -#define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120 -#define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122 -/**@}*/ - -/** @endcond */ - -/** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs - * - * These are convenience macros that are specific to the - * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl() - * interface. - * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and - * @ref opus_decoderctls may be applied to a multistream encoder or decoder as - * well. - * In addition, you may retrieve the encoder or decoder state for an specific - * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or - * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually. - */ -/**@{*/ - -/** Gets the encoder state for an individual stream of a multistream encoder. - * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you - * wish to retrieve. - * This must be non-negative and less than - * the <code>streams</code> parameter used - * to initialize the encoder. - * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given - * encoder state. - * @retval OPUS_BAD_ARG The index of the requested stream was out of range. - * @hideinitializer - */ -#define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y) - -/** Gets the decoder state for an individual stream of a multistream decoder. - * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you - * wish to retrieve. - * This must be non-negative and less than - * the <code>streams</code> parameter used - * to initialize the decoder. - * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given - * decoder state. - * @retval OPUS_BAD_ARG The index of the requested stream was out of range. - * @hideinitializer - */ -#define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y) - -/**@}*/ - -/** @defgroup opus_multistream Opus Multistream API - * @{ - * - * The multistream API allows individual Opus streams to be combined into a - * single packet, enabling support for up to 255 channels. Unlike an - * elementary Opus stream, the encoder and decoder must negotiate the channel - * configuration before the decoder can successfully interpret the data in the - * packets produced by the encoder. Some basic information, such as packet - * duration, can be computed without any special negotiation. - * - * The format for multistream Opus packets is defined in the - * <a href="http://tools.ietf.org/html/draft-terriberry-oggopus">Ogg - * encapsulation specification</a> and is based on the self-delimited Opus - * framing described in Appendix B of <a href="http://tools.ietf.org/html/rfc6716">RFC 6716</a>. - * Normal Opus packets are just a degenerate case of multistream Opus packets, - * and can be encoded or decoded with the multistream API by setting - * <code>streams</code> to <code>1</code> when initializing the encoder or - * decoder. - * - * Multistream Opus streams can contain up to 255 elementary Opus streams. - * These may be either "uncoupled" or "coupled", indicating that the decoder - * is configured to decode them to either 1 or 2 channels, respectively. - * The streams are ordered so that all coupled streams appear at the - * beginning. - * - * A <code>mapping</code> table defines which decoded channel <code>i</code> - * should be used for each input/output (I/O) channel <code>j</code>. This table is - * typically provided as an unsigned char array. - * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>. - * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is - * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code> - * is even, or as the right channel of stream <code>(i/2)</code> if - * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as - * mono in stream <code>(i - coupled_streams)</code>, unless it has the special - * value 255, in which case it is omitted from the encoding entirely (the - * decoder will reproduce it as silence). Each value <code>i</code> must either - * be the special value 255 or be less than <code>streams + coupled_streams</code>. - * - * The output channels specified by the encoder - * should use the - * <a href="http://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-800004.3.9">Vorbis - * channel ordering</a>. A decoder may wish to apply an additional permutation - * to the mapping the encoder used to achieve a different output channel - * order (e.g. for outputing in WAV order). - * - * Each multistream packet contains an Opus packet for each stream, and all of - * the Opus packets in a single multistream packet must have the same - * duration. Therefore the duration of a multistream packet can be extracted - * from the TOC sequence of the first stream, which is located at the - * beginning of the packet, just like an elementary Opus stream: - * - * @code - * int nb_samples; - * int nb_frames; - * nb_frames = opus_packet_get_nb_frames(data, len); - * if (nb_frames < 1) - * return nb_frames; - * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames; - * @endcode - * - * The general encoding and decoding process proceeds exactly the same as in - * the normal @ref opus_encoder and @ref opus_decoder APIs. - * See their documentation for an overview of how to use the corresponding - * multistream functions. - */ - -/** Opus multistream encoder state. - * This contains the complete state of a multistream Opus encoder. - * It is position independent and can be freely copied. - * @see opus_multistream_encoder_create - * @see opus_multistream_encoder_init - */ -typedef struct OpusMSEncoder OpusMSEncoder; - -/** Opus multistream decoder state. - * This contains the complete state of a multistream Opus decoder. - * It is position independent and can be freely copied. - * @see opus_multistream_decoder_create - * @see opus_multistream_decoder_init - */ -typedef struct OpusMSDecoder OpusMSDecoder; - -/**\name Multistream encoder functions */ -/**@{*/ - -/** Gets the size of an OpusMSEncoder structure. - * @param streams <tt>int</tt>: The total number of streams to encode from the - * input. - * This must be no more than 255. - * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams - * to encode. - * This must be no larger than the total - * number of streams. - * Additionally, The total number of - * encoded channels (<code>streams + - * coupled_streams</code>) must be no - * more than 255. - * @returns The size in bytes on success, or a negative error code - * (see @ref opus_errorcodes) on error. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size( - int streams, - int coupled_streams -); - -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size( - int channels, - int mapping_family -); - - -/** Allocates and initializes a multistream encoder state. - * Call opus_multistream_encoder_destroy() to release - * this object when finished. - * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). - * This must be one of 8000, 12000, 16000, - * 24000, or 48000. - * @param channels <tt>int</tt>: Number of channels in the input signal. - * This must be at most 255. - * It may be greater than the number of - * coded channels (<code>streams + - * coupled_streams</code>). - * @param streams <tt>int</tt>: The total number of streams to encode from the - * input. - * This must be no more than the number of channels. - * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams - * to encode. - * This must be no larger than the total - * number of streams. - * Additionally, The total number of - * encoded channels (<code>streams + - * coupled_streams</code>) must be no - * more than the number of input channels. - * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from - * encoded channels to input channels, as described in - * @ref opus_multistream. As an extra constraint, the - * multistream encoder does not allow encoding coupled - * streams for which one channel is unused since this - * is never a good idea. - * @param application <tt>int</tt>: The target encoder application. - * This must be one of the following: - * <dl> - * <dt>#OPUS_APPLICATION_VOIP</dt> - * <dd>Process signal for improved speech intelligibility.</dd> - * <dt>#OPUS_APPLICATION_AUDIO</dt> - * <dd>Favor faithfulness to the original input.</dd> - * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> - * <dd>Configure the minimum possible coding delay by disabling certain modes - * of operation.</dd> - * </dl> - * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error - * code (see @ref opus_errorcodes) on - * failure. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create( - opus_int32 Fs, - int channels, - int streams, - int coupled_streams, - const unsigned char *mapping, - int application, - int *error -) OPUS_ARG_NONNULL(5); - -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create( - opus_int32 Fs, - int channels, - int mapping_family, - int *streams, - int *coupled_streams, - unsigned char *mapping, - int application, - int *error -) OPUS_ARG_NONNULL(5); - -/** Initialize a previously allocated multistream encoder state. - * The memory pointed to by \a st must be at least the size returned by - * opus_multistream_encoder_get_size(). - * This is intended for applications which use their own allocator instead of - * malloc. - * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. - * @see opus_multistream_encoder_create - * @see opus_multistream_encoder_get_size - * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. - * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). - * This must be one of 8000, 12000, 16000, - * 24000, or 48000. - * @param channels <tt>int</tt>: Number of channels in the input signal. - * This must be at most 255. - * It may be greater than the number of - * coded channels (<code>streams + - * coupled_streams</code>). - * @param streams <tt>int</tt>: The total number of streams to encode from the - * input. - * This must be no more than the number of channels. - * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams - * to encode. - * This must be no larger than the total - * number of streams. - * Additionally, The total number of - * encoded channels (<code>streams + - * coupled_streams</code>) must be no - * more than the number of input channels. - * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from - * encoded channels to input channels, as described in - * @ref opus_multistream. As an extra constraint, the - * multistream encoder does not allow encoding coupled - * streams for which one channel is unused since this - * is never a good idea. - * @param application <tt>int</tt>: The target encoder application. - * This must be one of the following: - * <dl> - * <dt>#OPUS_APPLICATION_VOIP</dt> - * <dd>Process signal for improved speech intelligibility.</dd> - * <dt>#OPUS_APPLICATION_AUDIO</dt> - * <dd>Favor faithfulness to the original input.</dd> - * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> - * <dd>Configure the minimum possible coding delay by disabling certain modes - * of operation.</dd> - * </dl> - * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) - * on failure. - */ -OPUS_EXPORT int opus_multistream_encoder_init( - OpusMSEncoder *st, - opus_int32 Fs, - int channels, - int streams, - int coupled_streams, - const unsigned char *mapping, - int application -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); - -OPUS_EXPORT int opus_multistream_surround_encoder_init( - OpusMSEncoder *st, - opus_int32 Fs, - int channels, - int mapping_family, - int *streams, - int *coupled_streams, - unsigned char *mapping, - int application -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); - -/** Encodes a multistream Opus frame. - * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. - * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved - * samples. - * This must contain - * <code>frame_size*channels</code> - * samples. - * @param frame_size <tt>int</tt>: Number of samples per channel in the input - * signal. - * This must be an Opus frame size for the - * encoder's sampling rate. - * For example, at 48 kHz the permitted values - * are 120, 240, 480, 960, 1920, and 2880. - * Passing in a duration of less than 10 ms - * (480 samples at 48 kHz) will prevent the - * encoder from using the LPC or hybrid modes. - * @param[out] data <tt>unsigned char*</tt>: Output payload. - * This must contain storage for at - * least \a max_data_bytes. - * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated - * memory for the output - * payload. This may be - * used to impose an upper limit on - * the instant bitrate, but should - * not be used as the only bitrate - * control. Use #OPUS_SET_BITRATE to - * control the bitrate. - * @returns The length of the encoded packet (in bytes) on success or a - * negative error code (see @ref opus_errorcodes) on failure. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode( - OpusMSEncoder *st, - const opus_int16 *pcm, - int frame_size, - unsigned char *data, - opus_int32 max_data_bytes -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); - -/** Encodes a multistream Opus frame from floating point input. - * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. - * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved - * samples with a normal range of - * +/-1.0. - * Samples with a range beyond +/-1.0 - * are supported but will be clipped by - * decoders using the integer API and - * should only be used if it is known - * that the far end supports extended - * dynamic range. - * This must contain - * <code>frame_size*channels</code> - * samples. - * @param frame_size <tt>int</tt>: Number of samples per channel in the input - * signal. - * This must be an Opus frame size for the - * encoder's sampling rate. - * For example, at 48 kHz the permitted values - * are 120, 240, 480, 960, 1920, and 2880. - * Passing in a duration of less than 10 ms - * (480 samples at 48 kHz) will prevent the - * encoder from using the LPC or hybrid modes. - * @param[out] data <tt>unsigned char*</tt>: Output payload. - * This must contain storage for at - * least \a max_data_bytes. - * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated - * memory for the output - * payload. This may be - * used to impose an upper limit on - * the instant bitrate, but should - * not be used as the only bitrate - * control. Use #OPUS_SET_BITRATE to - * control the bitrate. - * @returns The length of the encoded packet (in bytes) on success or a - * negative error code (see @ref opus_errorcodes) on failure. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float( - OpusMSEncoder *st, - const float *pcm, - int frame_size, - unsigned char *data, - opus_int32 max_data_bytes -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); - -/** Frees an <code>OpusMSEncoder</code> allocated by - * opus_multistream_encoder_create(). - * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed. - */ -OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st); - -/** Perform a CTL function on a multistream Opus encoder. - * - * Generally the request and subsequent arguments are generated by a - * convenience macro. - * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state. - * @param request This and all remaining parameters should be replaced by one - * of the convenience macros in @ref opus_genericctls, - * @ref opus_encoderctls, or @ref opus_multistream_ctls. - * @see opus_genericctls - * @see opus_encoderctls - * @see opus_multistream_ctls - */ -OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); - -/**@}*/ - -/**\name Multistream decoder functions */ -/**@{*/ - -/** Gets the size of an <code>OpusMSDecoder</code> structure. - * @param streams <tt>int</tt>: The total number of streams coded in the - * input. - * This must be no more than 255. - * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled - * (2 channel) streams. - * This must be no larger than the total - * number of streams. - * Additionally, The total number of - * coded channels (<code>streams + - * coupled_streams</code>) must be no - * more than 255. - * @returns The size in bytes on success, or a negative error code - * (see @ref opus_errorcodes) on error. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size( - int streams, - int coupled_streams -); - -/** Allocates and initializes a multistream decoder state. - * Call opus_multistream_decoder_destroy() to release - * this object when finished. - * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). - * This must be one of 8000, 12000, 16000, - * 24000, or 48000. - * @param channels <tt>int</tt>: Number of channels to output. - * This must be at most 255. - * It may be different from the number of coded - * channels (<code>streams + - * coupled_streams</code>). - * @param streams <tt>int</tt>: The total number of streams coded in the - * input. - * This must be no more than 255. - * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled - * (2 channel) streams. - * This must be no larger than the total - * number of streams. - * Additionally, The total number of - * coded channels (<code>streams + - * coupled_streams</code>) must be no - * more than 255. - * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from - * coded channels to output channels, as described in - * @ref opus_multistream. - * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error - * code (see @ref opus_errorcodes) on - * failure. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create( - opus_int32 Fs, - int channels, - int streams, - int coupled_streams, - const unsigned char *mapping, - int *error -) OPUS_ARG_NONNULL(5); - -/** Intialize a previously allocated decoder state object. - * The memory pointed to by \a st must be at least the size returned by - * opus_multistream_encoder_get_size(). - * This is intended for applications which use their own allocator instead of - * malloc. - * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. - * @see opus_multistream_decoder_create - * @see opus_multistream_deocder_get_size - * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize. - * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). - * This must be one of 8000, 12000, 16000, - * 24000, or 48000. - * @param channels <tt>int</tt>: Number of channels to output. - * This must be at most 255. - * It may be different from the number of coded - * channels (<code>streams + - * coupled_streams</code>). - * @param streams <tt>int</tt>: The total number of streams coded in the - * input. - * This must be no more than 255. - * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled - * (2 channel) streams. - * This must be no larger than the total - * number of streams. - * Additionally, The total number of - * coded channels (<code>streams + - * coupled_streams</code>) must be no - * more than 255. - * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from - * coded channels to output channels, as described in - * @ref opus_multistream. - * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) - * on failure. - */ -OPUS_EXPORT int opus_multistream_decoder_init( - OpusMSDecoder *st, - opus_int32 Fs, - int channels, - int streams, - int coupled_streams, - const unsigned char *mapping -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); - -/** Decode a multistream Opus packet. - * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. - * @param[in] data <tt>const unsigned char*</tt>: Input payload. - * Use a <code>NULL</code> - * pointer to indicate packet - * loss. - * @param len <tt>opus_int32</tt>: Number of bytes in payload. - * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved - * samples. - * This must contain room for - * <code>frame_size*channels</code> - * samples. - * @param frame_size <tt>int</tt>: The number of samples per channel of - * available space in \a pcm. - * If this is less than the maximum packet duration - * (120 ms; 5760 for 48kHz), this function will not be capable - * of decoding some packets. In the case of PLC (data==NULL) - * or FEC (decode_fec=1), then frame_size needs to be exactly - * the duration of audio that is missing, otherwise the - * decoder will not be in the optimal state to decode the - * next incoming packet. For the PLC and FEC cases, frame_size - * <b>must</b> be a multiple of 2.5 ms. - * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band - * forward error correction data be decoded. - * If no such data is available, the frame is - * decoded as if it were lost. - * @returns Number of samples decoded on success or a negative error code - * (see @ref opus_errorcodes) on failure. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode( - OpusMSDecoder *st, - const unsigned char *data, - opus_int32 len, - opus_int16 *pcm, - int frame_size, - int decode_fec -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); - -/** Decode a multistream Opus packet with floating point output. - * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. - * @param[in] data <tt>const unsigned char*</tt>: Input payload. - * Use a <code>NULL</code> - * pointer to indicate packet - * loss. - * @param len <tt>opus_int32</tt>: Number of bytes in payload. - * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved - * samples. - * This must contain room for - * <code>frame_size*channels</code> - * samples. - * @param frame_size <tt>int</tt>: The number of samples per channel of - * available space in \a pcm. - * If this is less than the maximum packet duration - * (120 ms; 5760 for 48kHz), this function will not be capable - * of decoding some packets. In the case of PLC (data==NULL) - * or FEC (decode_fec=1), then frame_size needs to be exactly - * the duration of audio that is missing, otherwise the - * decoder will not be in the optimal state to decode the - * next incoming packet. For the PLC and FEC cases, frame_size - * <b>must</b> be a multiple of 2.5 ms. - * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band - * forward error correction data be decoded. - * If no such data is available, the frame is - * decoded as if it were lost. - * @returns Number of samples decoded on success or a negative error code - * (see @ref opus_errorcodes) on failure. - */ -OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float( - OpusMSDecoder *st, - const unsigned char *data, - opus_int32 len, - float *pcm, - int frame_size, - int decode_fec -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); - -/** Perform a CTL function on a multistream Opus decoder. - * - * Generally the request and subsequent arguments are generated by a - * convenience macro. - * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state. - * @param request This and all remaining parameters should be replaced by one - * of the convenience macros in @ref opus_genericctls, - * @ref opus_decoderctls, or @ref opus_multistream_ctls. - * @see opus_genericctls - * @see opus_decoderctls - * @see opus_multistream_ctls - */ -OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); - -/** Frees an <code>OpusMSDecoder</code> allocated by - * opus_multistream_decoder_create(). - * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed. - */ -OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st); - -/**@}*/ - -/**@}*/ - -#ifdef __cplusplus -} -#endif - -#endif /* OPUS_MULTISTREAM_H */ |