remove most libraries from the source tree

1 files changed, 0 insertions, 197 deletions

diff --git a/src/libspeex/include/speex/speex_jitter.h b/src/libspeex/include/speex/speex_jitter.h
deleted file mode 100644
index d68674b1..00000000
--- a/src/libspeex/include/speex/speex_jitter.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin */
-/**
-   @file speex_jitter.h
-   @brief Adaptive jitter buffer for Speex
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef SPEEX_JITTER_H
-#define SPEEX_JITTER_H
-/** @defgroup JitterBuffer JitterBuffer: Adaptive jitter buffer
- *  This is the jitter buffer that reorders UDP/RTP packets and adjusts the buffer size
- * to maintain good quality and low latency.
- *  @{
- */
-
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** Generic adaptive jitter buffer state */
-struct JitterBuffer_;
-
-/** Generic adaptive jitter buffer state */
-typedef struct JitterBuffer_ JitterBuffer;
-
-/** Definition of an incoming packet */
-typedef struct _JitterBufferPacket JitterBufferPacket;
-
-/** Definition of an incoming packet */
-struct _JitterBufferPacket {
-   char        *data;       /**< Data bytes contained in the packet */
-   spx_uint32_t len;        /**< Length of the packet in bytes */
-   spx_uint32_t timestamp;  /**< Timestamp for the packet */
-   spx_uint32_t span;       /**< Time covered by the packet (same units as timestamp) */
-   spx_uint16_t sequence;   /**< RTP Sequence number if available (0 otherwise) */
-   spx_uint32_t user_data;  /**< Put whatever data you like here (it's ignored by the jitter buffer) */
-};
-
-/** Packet has been retrieved */
-#define JITTER_BUFFER_OK 0
-/** Packet is lost or is late */
-#define JITTER_BUFFER_MISSING 1
-/** A "fake" packet is meant to be inserted here to increase buffering */
-#define JITTER_BUFFER_INSERTION 2
-/** There was an error in the jitter buffer */
-#define JITTER_BUFFER_INTERNAL_ERROR -1
-/** Invalid argument */
-#define JITTER_BUFFER_BAD_ARGUMENT -2
-
-
-/** Set minimum amount of extra buffering required (margin) */
-#define JITTER_BUFFER_SET_MARGIN 0
-/** Get minimum amount of extra buffering required (margin) */
-#define JITTER_BUFFER_GET_MARGIN 1
-/* JITTER_BUFFER_SET_AVAILABLE_COUNT wouldn't make sense */
-
-/** Get the amount of available packets currently buffered */
-#define JITTER_BUFFER_GET_AVAILABLE_COUNT 3
-/** Included because of an early misspelling (will remove in next release) */
-#define JITTER_BUFFER_GET_AVALIABLE_COUNT 3
-
-/** Assign a function to destroy unused packet. When setting that, the jitter 
-    buffer no longer copies packet data. */
-#define JITTER_BUFFER_SET_DESTROY_CALLBACK 4
-/**  */
-#define JITTER_BUFFER_GET_DESTROY_CALLBACK 5
-
-/** Tell the jitter buffer to only adjust the delay in multiples of the step parameter provided */
-#define JITTER_BUFFER_SET_DELAY_STEP 6
-/**  */
-#define JITTER_BUFFER_GET_DELAY_STEP 7
-
-/** Tell the jitter buffer to only do concealment in multiples of the size parameter provided */
-#define JITTER_BUFFER_SET_CONCEALMENT_SIZE 8
-#define JITTER_BUFFER_GET_CONCEALMENT_SIZE 9
-
-/** Absolute max amount of loss that can be tolerated regardless of the delay. Typical loss 
-    should be half of that or less. */
-#define JITTER_BUFFER_SET_MAX_LATE_RATE 10
-#define JITTER_BUFFER_GET_MAX_LATE_RATE 11
-
-/** Equivalent cost of one percent late packet in timestamp units */
-#define JITTER_BUFFER_SET_LATE_COST 12
-#define JITTER_BUFFER_GET_LATE_COST 13
-
-
-/** Initialises jitter buffer 
- * 
- * @param step_size Starting value for the size of concleanment packets and delay 
-       adjustment steps. Can be changed at any time using JITTER_BUFFER_SET_DELAY_STEP
-       and JITTER_BUFFER_GET_CONCEALMENT_SIZE.
- * @return Newly created jitter buffer state
- */
-JitterBuffer *jitter_buffer_init(int step_size);
-
-/** Restores jitter buffer to its original state 
- * 
- * @param jitter Jitter buffer state
- */
-void jitter_buffer_reset(JitterBuffer *jitter);
-
-/** Destroys jitter buffer 
- * 
- * @param jitter Jitter buffer state
- */
-void jitter_buffer_destroy(JitterBuffer *jitter);
-
-/** Put one packet into the jitter buffer
- * 
- * @param jitter Jitter buffer state
- * @param packet Incoming packet
-*/
-void jitter_buffer_put(JitterBuffer *jitter, const JitterBufferPacket *packet);
-
-/** Get one packet from the jitter buffer
- * 
- * @param jitter Jitter buffer state
- * @param packet Returned packet
- * @param desired_span Number of samples (or units) we wish to get from the buffer (no guarantee)
- * @param current_timestamp Timestamp for the returned packet 
-*/
-int jitter_buffer_get(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t desired_span, spx_int32_t *start_offset);
-
-/** Used right after jitter_buffer_get() to obtain another packet that would have the same timestamp.
- * This is mainly useful for media where a single "frame" can be split into several packets.
- * 
- * @param jitter Jitter buffer state
- * @param packet Returned packet
- */
-int jitter_buffer_get_another(JitterBuffer *jitter, JitterBufferPacket *packet);
-
-/** Get pointer timestamp of jitter buffer
- * 
- * @param jitter Jitter buffer state
-*/
-int jitter_buffer_get_pointer_timestamp(JitterBuffer *jitter);
-
-/** Advance by one tick
- * 
- * @param jitter Jitter buffer state
-*/
-void jitter_buffer_tick(JitterBuffer *jitter);
-
-/** Telling the jitter buffer about the remaining data in the application buffer
- * @param jitter Jitter buffer state
- * @param rem Amount of data buffered by the application (timestamp units)
- */
-void jitter_buffer_remaining_span(JitterBuffer *jitter, spx_uint32_t rem);
-
-/** Used like the ioctl function to control the jitter buffer parameters
- * 
- * @param jitter Jitter buffer state
- * @param request ioctl-type request (one of the JITTER_BUFFER_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown
-*/
-int jitter_buffer_ctl(JitterBuffer *jitter, int request, void *ptr);
-
-int jitter_buffer_update_delay(JitterBuffer *jitter, JitterBufferPacket *packet, spx_int32_t *start_offset);
-
-/* @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif