Add libopus 1.0.2 and libopusfile 0.2

5 files changed, 2678 insertions, 0 deletions

diff --git a/src/opus-1.0.2/include/opus.h b/src/opus-1.0.2/include/opus.h
new file mode 100644
index 00000000..847a07c1
--- /dev/null
+++ b/src/opus-1.0.2/include/opus.h
@@ -0,0 +1,903 @@
+/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
+   Written by Jean-Marc Valin and Koen Vos */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus.h
+ * @brief Opus reference implementation API
+ */
+
+#ifndef OPUS_H
+#define OPUS_H
+
+#include "opus_types.h"
+#include "opus_defines.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @mainpage Opus
+ *
+ * The Opus codec is designed for interactive speech and audio transmission over the Internet.
+ * It is designed by the IETF Codec Working Group and incorporates technology from
+ * Skype's SILK codec and Xiph.Org's CELT codec.
+ *
+ * The Opus codec is designed to handle a wide range of interactive audio applications,
+ * including Voice over IP, videoconferencing, in-game chat, and even remote live music
+ * performances. It can scale from low bit-rate narrowband speech to very high quality
+ * stereo music. Its main features are:
+
+ * @li Sampling rates from 8 to 48 kHz
+ * @li Bit-rates from 6 kb/s to 510 kb/s
+ * @li Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
+ * @li Audio bandwidth from narrowband to full-band
+ * @li Support for speech and music
+ * @li Support for mono and stereo
+ * @li Support for multichannel (up to 255 channels)
+ * @li Frame sizes from 2.5 ms to 60 ms
+ * @li Good loss robustness and packet loss concealment (PLC)
+ * @li Floating point and fixed-point implementation
+ *
+ * Documentation sections:
+ * @li @ref opus_encoder
+ * @li @ref opus_decoder
+ * @li @ref opus_repacketizer
+ * @li @ref opus_multistream
+ * @li @ref opus_libinfo
+ * @li @ref opus_custom
+ */
+
+/** @defgroup opus_encoder Opus Encoder
+  * @{
+  *
+  * @brief This page describes the process and functions used to encode Opus.
+  *
+  * Since Opus is a stateful codec, the encoding process starts with creating an encoder
+  * state. This can be done with:
+  *
+  * @code
+  * int          error;
+  * OpusEncoder *enc;
+  * enc = opus_encoder_create(Fs, channels, application, &error);
+  * @endcode
+  *
+  * From this point, @c enc can be used for encoding an audio stream. An encoder state
+  * @b must @b not be used for more than one stream at the same time. Similarly, the encoder
+  * state @b must @b not be re-initialized for each frame.
+  *
+  * While opus_encoder_create() allocates memory for the state, it's also possible
+  * to initialize pre-allocated memory:
+  *
+  * @code
+  * int          size;
+  * int          error;
+  * OpusEncoder *enc;
+  * size = opus_encoder_get_size(channels);
+  * enc = malloc(size);
+  * error = opus_encoder_init(enc, Fs, channels, application);
+  * @endcode
+  *
+  * where opus_encoder_get_size() returns the required size for the encoder state. Note that
+  * future versions of this code may change the size, so no assuptions should be made about it.
+  *
+  * The encoder state is always continuous in memory and only a shallow copy is sufficient
+  * to copy it (e.g. memcpy())
+  *
+  * It is possible to change some of the encoder's settings using the opus_encoder_ctl()
+  * interface. All these settings already default to the recommended value, so they should
+  * only be changed when necessary. The most common settings one may want to change are:
+  *
+  * @code
+  * opus_encoder_ctl(enc, OPUS_SET_BITRATE(bitrate));
+  * opus_encoder_ctl(enc, OPUS_SET_COMPLEXITY(complexity));
+  * opus_encoder_ctl(enc, OPUS_SET_SIGNAL(signal_type));
+  * @endcode
+  *
+  * where
+  *
+  * @arg bitrate is in bits per second (b/s)
+  * @arg complexity is a value from 1 to 10, where 1 is the lowest complexity and 10 is the highest
+  * @arg signal_type is either OPUS_AUTO (default), OPUS_SIGNAL_VOICE, or OPUS_SIGNAL_MUSIC
+  *
+  * See @ref opus_encoderctls and @ref opus_genericctls for a complete list of parameters that can be set or queried. Most parameters can be set or changed at any time during a stream.
+  *
+  * To encode a frame, opus_encode() or opus_encode_float() must be called with exactly one frame (2.5, 5, 10, 20, 40 or 60 ms) of audio data:
+  * @code
+  * len = opus_encode(enc, audio_frame, frame_size, packet, max_packet);
+  * @endcode
+  *
+  * where
+  * <ul>
+  * <li>audio_frame is the audio data in opus_int16 (or float for opus_encode_float())</li>
+  * <li>frame_size is the duration of the frame in samples (per channel)</li>
+  * <li>packet is the byte array to which the compressed data is written</li>
+  * <li>max_packet is the maximum number of bytes that can be written in the packet (4000 bytes is recommended).
+  *     Do not use max_packet to control VBR target bitrate, instead use the #OPUS_SET_BITRATE CTL.</li>
+  * </ul>
+  *
+  * opus_encode() and opus_encode_float() return the number of bytes actually written to the packet.
+  * The return value <b>can be negative</b>, which indicates that an error has occurred. If the return value
+  * is 1 byte, then the packet does not need to be transmitted (DTX).
+  *
+  * Once the encoder state if no longer needed, it can be destroyed with
+  *
+  * @code
+  * opus_encoder_destroy(enc);
+  * @endcode
+  *
+  * If the encoder was created with opus_encoder_init() rather than opus_encoder_create(),
+  * then no action is required aside from potentially freeing the memory that was manually
+  * allocated for it (calling free(enc) for the example above)
+  *
+  */
+
+/** Opus encoder state.
+  * This contains the complete state of an Opus encoder.
+  * It is position independent and can be freely copied.
+  * @see opus_encoder_create,opus_encoder_init
+  */
+typedef struct OpusEncoder OpusEncoder;
+
+/** Gets the size of an <code>OpusEncoder</code> structure.
+  * @param[in] channels <tt>int</tt>: Number of channels.
+  *                                   This must be 1 or 2.
+  * @returns The size in bytes.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_encoder_get_size(int channels);
+
+/**
+ */
+
+/** Allocates and initializes an encoder state.
+ * There are three coding modes:
+ *
+ * @ref OPUS_APPLICATION_VOIP gives best quality at a given bitrate for voice
+ *    signals. It enhances the  input signal by high-pass filtering and
+ *    emphasizing formants and harmonics. Optionally  it includes in-band
+ *    forward error correction to protect against packet loss. Use this
+ *    mode for typical VoIP applications. Because of the enhancement,
+ *    even at high bitrates the output may sound different from the input.
+ *
+ * @ref OPUS_APPLICATION_AUDIO gives best quality at a given bitrate for most
+ *    non-voice signals like music. Use this mode for music and mixed
+ *    (music/voice) content, broadcast, and applications requiring less
+ *    than 15 ms of coding delay.
+ *
+ * @ref OPUS_APPLICATION_RESTRICTED_LOWDELAY configures low-delay mode that
+ *    disables the speech-optimized mode in exchange for slightly reduced delay.
+ *    This mode can only be set on an newly initialized or freshly reset encoder
+ *    because it changes the codec delay.
+ *
+ * This is useful when the caller knows that the speech-optimized modes will not be needed (use with caution).
+ * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz)
+ *                                     This must be one of 8000, 12000, 16000,
+ *                                     24000, or 48000.
+ * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal
+ * @param [in] application <tt>int</tt>: Coding mode (@ref OPUS_APPLICATION_VOIP/@ref OPUS_APPLICATION_AUDIO/@ref OPUS_APPLICATION_RESTRICTED_LOWDELAY)
+ * @param [out] error <tt>int*</tt>: @ref opus_errorcodes
+ * @note Regardless of the sampling rate and number channels selected, the Opus encoder
+ * can switch to a lower audio bandwidth or number of channels if the bitrate
+ * selected is too low. This also means that it is safe to always use 48 kHz stereo input
+ * and let the encoder optimize the encoding.
+ */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusEncoder *opus_encoder_create(
+    opus_int32 Fs,
+    int channels,
+    int application,
+    int *error
+);
+
+/** Initializes a previously allocated encoder state
+  * The memory pointed to by st must be at least the size returned by opus_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_encoder_create(),opus_encoder_get_size()
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz)
+ *                                      This must be one of 8000, 12000, 16000,
+ *                                      24000, or 48000.
+  * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal
+  * @param [in] application <tt>int</tt>: Coding mode (OPUS_APPLICATION_VOIP/OPUS_APPLICATION_AUDIO/OPUS_APPLICATION_RESTRICTED_LOWDELAY)
+  * @retval #OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_EXPORT int opus_encoder_init(
+    OpusEncoder *st,
+    opus_int32 Fs,
+    int channels,
+    int application
+) OPUS_ARG_NONNULL(1);
+
+/** Encodes an Opus frame.
+  * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>opus_int16*</tt>: Input signal (interleaved if 2 channels). length is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the
+  *                                      input signal.
+  *                                      This must be an Opus frame size for
+  *                                      the encoder's sampling rate.
+  *                                      For example, at 48 kHz the permitted
+  *                                      values are 120, 240, 480, 960, 1920,
+  *                                      and 2880.
+  *                                      Passing in a duration of less than
+  *                                      10 ms (480 samples at 48 kHz) will
+  *                                      prevent the encoder from using the LPC
+  *                                      or hybrid modes.
+  * @param [out] data <tt>unsigned char*</tt>: Output payload.
+  *                                            This must contain storage for at
+  *                                            least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode(
+    OpusEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes an Opus frame from floating point input.
+  * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>float*</tt>: Input in float format (interleaved if 2 channels), with a normal range of +/-1.0.
+  *          Samples with a range beyond +/-1.0 are supported but will
+  *          be clipped by decoders using the integer API and should
+  *          only be used if it is known that the far end supports
+  *          extended dynamic range.
+  *          length is frame_size*channels*sizeof(float)
+  * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the
+  *                                      input signal.
+  *                                      This must be an Opus frame size for
+  *                                      the encoder's sampling rate.
+  *                                      For example, at 48 kHz the permitted
+  *                                      values are 120, 240, 480, 960, 1920,
+  *                                      and 2880.
+  *                                      Passing in a duration of less than
+  *                                      10 ms (480 samples at 48 kHz) will
+  *                                      prevent the encoder from using the LPC
+  *                                      or hybrid modes.
+  * @param [out] data <tt>unsigned char*</tt>: Output payload.
+  *                                            This must contain storage for at
+  *                                            least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode_float(
+    OpusEncoder *st,
+    const float *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Frees an <code>OpusEncoder</code> allocated by opus_encoder_create().
+  * @param[in] st <tt>OpusEncoder*</tt>: State to be freed.
+  */
+OPUS_EXPORT void opus_encoder_destroy(OpusEncoder *st);
+
+/** Perform a CTL function on an Opus encoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @param st <tt>OpusEncoder*</tt>: Encoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls or
+  *                @ref opus_encoderctls.
+  * @see opus_genericctls
+  * @see opus_encoderctls
+  */
+OPUS_EXPORT int opus_encoder_ctl(OpusEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+/**@}*/
+
+/** @defgroup opus_decoder Opus Decoder
+  * @{
+  *
+  * @brief This page describes the process and functions used to decode Opus.
+  *
+  * The decoding process also starts with creating a decoder
+  * state. This can be done with:
+  * @code
+  * int          error;
+  * OpusDecoder *dec;
+  * dec = opus_decoder_create(Fs, channels, &error);
+  * @endcode
+  * where
+  * @li Fs is the sampling rate and must be 8000, 12000, 16000, 24000, or 48000
+  * @li channels is the number of channels (1 or 2)
+  * @li error will hold the error code in case of failure (or #OPUS_OK on success)
+  * @li the return value is a newly created decoder state to be used for decoding
+  *
+  * While opus_decoder_create() allocates memory for the state, it's also possible
+  * to initialize pre-allocated memory:
+  * @code
+  * int          size;
+  * int          error;
+  * OpusDecoder *dec;
+  * size = opus_decoder_get_size(channels);
+  * dec = malloc(size);
+  * error = opus_decoder_init(dec, Fs, channels);
+  * @endcode
+  * where opus_decoder_get_size() returns the required size for the decoder state. Note that
+  * future versions of this code may change the size, so no assuptions should be made about it.
+  *
+  * The decoder state is always continuous in memory and only a shallow copy is sufficient
+  * to copy it (e.g. memcpy())
+  *
+  * To decode a frame, opus_decode() or opus_decode_float() must be called with a packet of compressed audio data:
+  * @code
+  * frame_size = opus_decode(dec, packet, len, decoded, max_size, 0);
+  * @endcode
+  * where
+  *
+  * @li packet is the byte array containing the compressed data
+  * @li len is the exact number of bytes contained in the packet
+  * @li decoded is the decoded audio data in opus_int16 (or float for opus_decode_float())
+  * @li max_size is the max duration of the frame in samples (per channel) that can fit into the decoded_frame array
+  *
+  * opus_decode() and opus_decode_float() return the number of samples (per channel) decoded from the packet.
+  * If that value is negative, then an error has occurred. This can occur if the packet is corrupted or if the audio
+  * buffer is too small to hold the decoded audio.
+  *
+  * Opus is a stateful codec with overlapping blocks and as a result Opus
+  * packets are not coded independently of each other. Packets must be
+  * passed into the decoder serially and in the correct order for a correct
+  * decode. Lost packets can be replaced with loss concealment by calling
+  * the decoder with a null pointer and zero length for the missing packet.
+  *
+  * A single codec state may only be accessed from a single thread at
+  * a time and any required locking must be performed by the caller. Separate
+  * streams must be decoded with separate decoder states and can be decoded
+  * in parallel unless the library was compiled with NONTHREADSAFE_PSEUDOSTACK
+  * defined.
+  *
+  */
+
+/** Opus decoder state.
+  * This contains the complete state of an Opus decoder.
+  * It is position independent and can be freely copied.
+  * @see opus_decoder_create,opus_decoder_init
+  */
+typedef struct OpusDecoder OpusDecoder;
+
+/** Gets the size of an <code>OpusDecoder</code> structure.
+  * @param [in] channels <tt>int</tt>: Number of channels.
+  *                                    This must be 1 or 2.
+  * @returns The size in bytes.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_size(int channels);
+
+/** Allocates and initializes a decoder state.
+  * @param [in] Fs <tt>opus_int32</tt>: Sample rate to decode at (Hz).
+  *                                     This must be one of 8000, 12000, 16000,
+  *                                     24000, or 48000.
+  * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode
+  * @param [out] error <tt>int*</tt>: #OPUS_OK Success or @ref opus_errorcodes
+  *
+  * Internally Opus stores data at 48000 Hz, so that should be the default
+  * value for Fs. However, the decoder can efficiently decode to buffers
+  * at 8, 12, 16, and 24 kHz so if for some reason the caller cannot use
+  * data at the full sample rate, or knows the compressed data doesn't
+  * use the full frequency range, it can request decoding at a reduced
+  * rate. Likewise, the decoder is capable of filling in either mono or
+  * interleaved stereo pcm buffers, at the caller's request.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusDecoder *opus_decoder_create(
+    opus_int32 Fs,
+    int channels,
+    int *error
+);
+
+/** Initializes a previously allocated decoder state.
+  * The state must be at least the size returned by opus_decoder_get_size().
+  * This is intended for applications which use their own allocator instead of malloc. @see opus_decoder_create,opus_decoder_get_size
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusDecoder*</tt>: Decoder state.
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate to decode to (Hz).
+  *                                     This must be one of 8000, 12000, 16000,
+  *                                     24000, or 48000.
+  * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode
+  * @retval #OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_EXPORT int opus_decoder_init(
+    OpusDecoder *st,
+    opus_int32 Fs,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+/** Decode an Opus packet.
+  * @param [in] st <tt>OpusDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload*
+  * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size Number of samples per channel of available space in \a pcm.
+  *  If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will
+  *  not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1),
+  *  then frame_size needs to be exactly the duration of audio that is missing, otherwise the
+  *  decoder will not be in the optimal state to decode the next incoming packet. For the PLC and
+  *  FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms.
+  * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be
+  *  decoded. If no such data is available, the frame is decoded as if it were lost.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode(
+    OpusDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    opus_int16 *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode an Opus packet with floating point output.
+  * @param [in] st <tt>OpusDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(float)
+  * @param [in] frame_size Number of samples per channel of available space in \a pcm.
+  *  If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will
+  *  not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1),
+  *  then frame_size needs to be exactly the duration of audio that is missing, otherwise the
+  *  decoder will not be in the optimal state to decode the next incoming packet. For the PLC and
+  *  FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms.
+  * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be
+  *  decoded. If no such data is available the frame is decoded as if it were lost.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode_float(
+    OpusDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    float *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus decoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @param st <tt>OpusDecoder*</tt>: Decoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls or
+  *                @ref opus_decoderctls.
+  * @see opus_genericctls
+  * @see opus_decoderctls
+  */
+OPUS_EXPORT int opus_decoder_ctl(OpusDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/** Frees an <code>OpusDecoder</code> allocated by opus_decoder_create().
+  * @param[in] st <tt>OpusDecoder*</tt>: State to be freed.
+  */
+OPUS_EXPORT void opus_decoder_destroy(OpusDecoder *st);
+
+/** Parse an opus packet into one or more frames.
+  * Opus_decode will perform this operation internally so most applications do
+  * not need to use this function.
+  * This function does not copy the frames, the returned pointers are pointers into
+  * the input packet.
+  * @param [in] data <tt>char*</tt>: Opus packet to be parsed
+  * @param [in] len <tt>opus_int32</tt>: size of data
+  * @param [out] out_toc <tt>char*</tt>: TOC pointer
+  * @param [out] frames <tt>char*[48]</tt> encapsulated frames
+  * @param [out] size <tt>short[48]</tt> sizes of the encapsulated frames
+  * @param [out] payload_offset <tt>int*</tt>: returns the position of the payload within the packet (in bytes)
+  * @returns number of frames
+  */
+OPUS_EXPORT int opus_packet_parse(
+   const unsigned char *data,
+   opus_int32 len,
+   unsigned char *out_toc,
+   const unsigned char *frames[48],
+   short size[48],
+   int *payload_offset
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Gets the bandwidth of an Opus packet.
+  * @param [in] data <tt>char*</tt>: Opus packet
+  * @retval OPUS_BANDWIDTH_NARROWBAND Narrowband (4kHz bandpass)
+  * @retval OPUS_BANDWIDTH_MEDIUMBAND Mediumband (6kHz bandpass)
+  * @retval OPUS_BANDWIDTH_WIDEBAND Wideband (8kHz bandpass)
+  * @retval OPUS_BANDWIDTH_SUPERWIDEBAND Superwideband (12kHz bandpass)
+  * @retval OPUS_BANDWIDTH_FULLBAND Fullband (20kHz bandpass)
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_bandwidth(const unsigned char *data) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of samples per frame from an Opus packet.
+  * @param [in] data <tt>char*</tt>: Opus packet.
+  *                                  This must contain at least one byte of
+  *                                  data.
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz.
+  *                                     This must be a multiple of 400, or
+  *                                     inaccurate results will be returned.
+  * @returns Number of samples per frame.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_samples_per_frame(const unsigned char *data, opus_int32 Fs) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of channels from an Opus packet.
+  * @param [in] data <tt>char*</tt>: Opus packet
+  * @returns Number of channels
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_channels(const unsigned char *data) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of frames in an Opus packet.
+  * @param [in] packet <tt>char*</tt>: Opus packet
+  * @param [in] len <tt>opus_int32</tt>: Length of packet
+  * @returns Number of frames
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_frames(const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of samples of an Opus packet.
+  * @param [in] packet <tt>char*</tt>: Opus packet
+  * @param [in] len <tt>opus_int32</tt>: Length of packet
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz.
+  *                                     This must be a multiple of 400, or
+  *                                     inaccurate results will be returned.
+  * @returns Number of samples
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_samples(const unsigned char packet[], opus_int32 len, opus_int32 Fs) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of samples of an Opus packet.
+  * @param [in] dec <tt>OpusDecoder*</tt>: Decoder state
+  * @param [in] packet <tt>char*</tt>: Opus packet
+  * @param [in] len <tt>opus_int32</tt>: Length of packet
+  * @returns Number of samples
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_nb_samples(const OpusDecoder *dec, const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+/**@}*/
+
+/** @defgroup opus_repacketizer Repacketizer
+  * @{
+  *
+  * The repacketizer can be used to merge multiple Opus packets into a single
+  * packet or alternatively to split Opus packets that have previously been
+  * merged. Splitting valid Opus packets is always guaranteed to succeed,
+  * whereas merging valid packets only succeeds if all frames have the same
+  * mode, bandwidth, and frame size, and when the total duration of the merged
+  * packet is no more than 120 ms.
+  * The repacketizer currently only operates on elementary Opus
+  * streams. It will not manipualte multistream packets successfully, except in
+  * the degenerate case where they consist of data from a single stream.
+  *
+  * The repacketizing process starts with creating a repacketizer state, either
+  * by calling opus_repacketizer_create() or by allocating the memory yourself,
+  * e.g.,
+  * @code
+  * OpusRepacketizer *rp;
+  * rp = (OpusRepacketizer*)malloc(opus_repacketizer_get_size());
+  * if (rp != NULL)
+  *     opus_repacketizer_init(rp);
+  * @endcode
+  *
+  * Then the application should submit packets with opus_repacketizer_cat(),
+  * extract new packets with opus_repacketizer_out() or
+  * opus_repacketizer_out_range(), and then reset the state for the next set of
+  * input packets via opus_repacketizer_init().
+  *
+  * For example, to split a sequence of packets into individual frames:
+  * @code
+  * unsigned char *data;
+  * int len;
+  * while (get_next_packet(&data, &len))
+  * {
+  *   unsigned char out[1276];
+  *   opus_int32 out_len;
+  *   int nb_frames;
+  *   int err;
+  *   int i;
+  *   err = opus_repacketizer_cat(rp, data, len);
+  *   if (err != OPUS_OK)
+  *   {
+  *     release_packet(data);
+  *     return err;
+  *   }
+  *   nb_frames = opus_repacketizer_get_nb_frames(rp);
+  *   for (i = 0; i < nb_frames; i++)
+  *   {
+  *     out_len = opus_repacketizer_out_range(rp, i, i+1, out, sizeof(out));
+  *     if (out_len < 0)
+  *     {
+  *        release_packet(data);
+  *        return (int)out_len;
+  *     }
+  *     output_next_packet(out, out_len);
+  *   }
+  *   opus_repacketizer_init(rp);
+  *   release_packet(data);
+  * }
+  * @endcode
+  *
+  * Alternatively, to combine a sequence of frames into packets that each
+  * contain up to <code>TARGET_DURATION_MS</code> milliseconds of data:
+  * @code
+  * // The maximum number of packets with duration TARGET_DURATION_MS occurs
+  * // when the frame size is 2.5 ms, for a total of (TARGET_DURATION_MS*2/5)
+  * // packets.
+  * unsigned char *data[(TARGET_DURATION_MS*2/5)+1];
+  * opus_int32 len[(TARGET_DURATION_MS*2/5)+1];
+  * int nb_packets;
+  * unsigned char out[1277*(TARGET_DURATION_MS*2/2)];
+  * opus_int32 out_len;
+  * int prev_toc;
+  * nb_packets = 0;
+  * while (get_next_packet(data+nb_packets, len+nb_packets))
+  * {
+  *   int nb_frames;
+  *   int err;
+  *   nb_frames = opus_packet_get_nb_frames(data[nb_packets], len[nb_packets]);
+  *   if (nb_frames < 1)
+  *   {
+  *     release_packets(data, nb_packets+1);
+  *     return nb_frames;
+  *   }
+  *   nb_frames += opus_repacketizer_get_nb_frames(rp);
+  *   // If adding the next packet would exceed our target, or it has an
+  *   // incompatible TOC sequence, output the packets we already have before
+  *   // submitting it.
+  *   // N.B., The nb_packets > 0 check ensures we've submitted at least one
+  *   // packet since the last call to opus_repacketizer_init(). Otherwise a
+  *   // single packet longer than TARGET_DURATION_MS would cause us to try to
+  *   // output an (invalid) empty packet. It also ensures that prev_toc has
+  *   // been set to a valid value. Additionally, len[nb_packets] > 0 is
+  *   // guaranteed by the call to opus_packet_get_nb_frames() above, so the
+  *   // reference to data[nb_packets][0] should be valid.
+  *   if (nb_packets > 0 && (
+  *       ((prev_toc & 0xFC) != (data[nb_packets][0] & 0xFC)) ||
+  *       opus_packet_get_samples_per_frame(data[nb_packets], 48000)*nb_frames >
+  *       TARGET_DURATION_MS*48))
+  *   {
+  *     out_len = opus_repacketizer_out(rp, out, sizeof(out));
+  *     if (out_len < 0)
+  *     {
+  *        release_packets(data, nb_packets+1);
+  *        return (int)out_len;
+  *     }
+  *     output_next_packet(out, out_len);
+  *     opus_repacketizer_init(rp);
+  *     release_packets(data, nb_packets);
+  *     data[0] = data[nb_packets];
+  *     len[0] = len[nb_packets];
+  *     nb_packets = 0;
+  *   }
+  *   err = opus_repacketizer_cat(rp, data[nb_packets], len[nb_packets]);
+  *   if (err != OPUS_OK)
+  *   {
+  *     release_packets(data, nb_packets+1);
+  *     return err;
+  *   }
+  *   prev_toc = data[nb_packets][0];
+  *   nb_packets++;
+  * }
+  * // Output the final, partial packet.
+  * if (nb_packets > 0)
+  * {
+  *   out_len = opus_repacketizer_out(rp, out, sizeof(out));
+  *   release_packets(data, nb_packets);
+  *   if (out_len < 0)
+  *     return (int)out_len;
+  *   output_next_packet(out, out_len);
+  * }
+  * @endcode
+  *
+  * An alternate way of merging packets is to simply call opus_repacketizer_cat()
+  * unconditionally until it fails. At that point, the merged packet can be
+  * obtained with opus_repacketizer_out() and the input packet for which
+  * opus_repacketizer_cat() needs to be re-added to a newly reinitialized
+  * repacketizer state.
+  */
+
+typedef struct OpusRepacketizer OpusRepacketizer;
+
+/** Gets the size of an <code>OpusRepacketizer</code> structure.
+  * @returns The size in bytes.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_size(void);
+
+/** (Re)initializes a previously allocated repacketizer state.
+  * The state must be at least the size returned by opus_repacketizer_get_size().
+  * This can be used for applications which use their own allocator instead of
+  * malloc().
+  * It must also be called to reset the queue of packets waiting to be
+  * repacketized, which is necessary if the maximum packet duration of 120 ms
+  * is reached or if you wish to submit packets with a different Opus
+  * configuration (coding mode, audio bandwidth, frame size, or channel count).
+  * Failure to do so will prevent a new packet from being added with
+  * opus_repacketizer_cat().
+  * @see opus_repacketizer_create
+  * @see opus_repacketizer_get_size
+  * @see opus_repacketizer_cat
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to
+  *                                       (re)initialize.
+  * @returns A pointer to the same repacketizer state that was passed in.
+  */
+OPUS_EXPORT OpusRepacketizer *opus_repacketizer_init(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1);
+
+/** Allocates memory and initializes the new repacketizer with
+ * opus_repacketizer_init().
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusRepacketizer *opus_repacketizer_create(void);
+
+/** Frees an <code>OpusRepacketizer</code> allocated by
+  * opus_repacketizer_create().
+  * @param[in] rp <tt>OpusRepacketizer*</tt>: State to be freed.
+  */
+OPUS_EXPORT void opus_repacketizer_destroy(OpusRepacketizer *rp);
+
+/** Add a packet to the current repacketizer state.
+  * This packet must match the configuration of any packets already submitted
+  * for repacketization since the last call to opus_repacketizer_init().
+  * This means that it must have the same coding mode, audio bandwidth, frame
+  * size, and channel count.
+  * This can be checked in advance by examining the top 6 bits of the first
+  * byte of the packet, and ensuring they match the top 6 bits of the first
+  * byte of any previously submitted packet.
+  * The total duration of audio in the repacketizer state also must not exceed
+  * 120 ms, the maximum duration of a single packet, after adding this packet.
+  *
+  * The contents of the current repacketizer state can be extracted into new
+  * packets using opus_repacketizer_out() or opus_repacketizer_out_range().
+  *
+  * In order to add a packet with a different configuration or to add more
+  * audio beyond 120 ms, you must clear the repacketizer state by calling
+  * opus_repacketizer_init().
+  * If a packet is too large to add to the current repacketizer state, no part
+  * of it is added, even if it contains multiple frames, some of which might
+  * fit.
+  * If you wish to be able to add parts of such packets, you should first use
+  * another repacketizer to split the packet into pieces and add them
+  * individually.
+  * @see opus_repacketizer_out_range
+  * @see opus_repacketizer_out
+  * @see opus_repacketizer_init
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to which to
+  *                                       add the packet.
+  * @param[in] data <tt>const unsigned char*</tt>: The packet data.
+  *                                                The application must ensure
+  *                                                this pointer remains valid
+  *                                                until the next call to
+  *                                                opus_repacketizer_init() or
+  *                                                opus_repacketizer_destroy().
+  * @param len <tt>opus_int32</tt>: The number of bytes in the packet data.
+  * @returns An error code indicating whether or not the operation succeeded.
+  * @retval #OPUS_OK The packet's contents have been added to the repacketizer
+  *                  state.
+  * @retval #OPUS_INVALID_PACKET The packet did not have a valid TOC sequence,
+  *                              the packet's TOC sequence was not compatible
+  *                              with previously submitted packets (because
+  *                              the coding mode, audio bandwidth, frame size,
+  *                              or channel count did not match), or adding
+  *                              this packet would increase the total amount of
+  *                              audio stored in the repacketizer state to more
+  *                              than 120 ms.
+  */
+OPUS_EXPORT int opus_repacketizer_cat(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+
+/** Construct a new packet from data previously submitted to the repacketizer
+  * state via opus_repacketizer_cat().
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to
+  *                                       construct the new packet.
+  * @param begin <tt>int</tt>: The index of the first frame in the current
+  *                            repacketizer state to include in the output.
+  * @param end <tt>int</tt>: One past the index of the last frame in the
+  *                          current repacketizer state to include in the
+  *                          output.
+  * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to
+  *                                                 store the output packet.
+  * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in
+  *                                    the output buffer. In order to guarantee
+  *                                    success, this should be at least
+  *                                    <code>1276</code> for a single frame,
+  *                                    or for multiple frames,
+  *                                    <code>1277*(end-begin)</code>.
+  *                                    However, <code>1*(end-begin)</code> plus
+  *                                    the size of all packet data submitted to
+  *                                    the repacketizer since the last call to
+  *                                    opus_repacketizer_init() or
+  *                                    opus_repacketizer_create() is also
+  *                                    sufficient, and possibly much smaller.
+  * @returns The total size of the output packet on success, or an error code
+  *          on failure.
+  * @retval #OPUS_BAD_ARG <code>[begin,end)</code> was an invalid range of
+  *                       frames (begin < 0, begin >= end, or end >
+  *                       opus_repacketizer_get_nb_frames()).
+  * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the
+  *                                complete output packet.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out_range(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Return the total number of frames contained in packet data submitted to
+  * the repacketizer state so far via opus_repacketizer_cat() since the last
+  * call to opus_repacketizer_init() or opus_repacketizer_create().
+  * This defines the valid range of packets that can be extracted with
+  * opus_repacketizer_out_range() or opus_repacketizer_out().
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state containing the
+  *                                       frames.
+  * @returns The total number of frames contained in the packet data submitted
+  *          to the repacketizer state.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_nb_frames(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1);
+
+/** Construct a new packet from data previously submitted to the repacketizer
+  * state via opus_repacketizer_cat().
+  * This is a convenience routine that returns all the data submitted so far
+  * in a single packet.
+  * It is equivalent to calling
+  * @code
+  * opus_repacketizer_out_range(rp, 0, opus_repacketizer_get_nb_frames(rp),
+  *                             data, maxlen)
+  * @endcode
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to
+  *                                       construct the new packet.
+  * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to
+  *                                                 store the output packet.
+  * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in
+  *                                    the output buffer. In order to guarantee
+  *                                    success, this should be at least
+  *                                    <code>1277*opus_repacketizer_get_nb_frames(rp)</code>.
+  *                                    However,
+  *                                    <code>1*opus_repacketizer_get_nb_frames(rp)</code>
+  *                                    plus the size of all packet data
+  *                                    submitted to the repacketizer since the
+  *                                    last call to opus_repacketizer_init() or
+  *                                    opus_repacketizer_create() is also
+  *                                    sufficient, and possibly much smaller.
+  * @returns The total size of the output packet on success, or an error code
+  *          on failure.
+  * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the
+  *                                complete output packet.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out(OpusRepacketizer *rp, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_H */
diff --git a/src/opus-1.0.2/include/opus_custom.h b/src/opus-1.0.2/include/opus_custom.h
new file mode 100644
index 00000000..e7861d6f
--- /dev/null
+++ b/src/opus-1.0.2/include/opus_custom.h
@@ -0,0 +1,329 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2009 Xiph.Org Foundation
+   Copyright (c) 2008-2012 Gregory Maxwell
+   Written by Jean-Marc Valin and Gregory Maxwell */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+  @file opus_custom.h
+  @brief Opus-Custom reference implementation API
+ */
+
+#ifndef OPUS_CUSTOM_H
+#define OPUS_CUSTOM_H
+
+#include "opus_defines.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef CUSTOM_MODES
+#define OPUS_CUSTOM_EXPORT OPUS_EXPORT
+#define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT
+#else
+#define OPUS_CUSTOM_EXPORT
+#ifdef CELT_C
+#define OPUS_CUSTOM_EXPORT_STATIC static inline
+#else
+#define OPUS_CUSTOM_EXPORT_STATIC
+#endif
+#endif
+
+/** @defgroup opus_custom Opus Custom
+  * @{
+  *  Opus Custom is an optional part of the Opus specification and
+  * reference implementation which uses a distinct API from the regular
+  * API and supports frame sizes that are not normally supported.\ Use
+  * of Opus Custom is discouraged for all but very special applications
+  * for which a frame size different from 2.5, 5, 10, or 20 ms is needed
+  * (for either complexity or latency reasons) and where interoperability
+  * is less important.
+  *
+  * In addition to the interoperability limitations the use of Opus custom
+  * disables a substantial chunk of the codec and generally lowers the
+  * quality available at a given bitrate. Normally when an application needs
+  * a different frame size from the codec it should buffer to match the
+  * sizes but this adds a small amount of delay which may be important
+  * in some very low latency applications. Some transports (especially
+  * constant rate RF transports) may also work best with frames of
+  * particular durations.
+  *
+  * Libopus only supports custom modes if they are enabled at compile time.
+  *
+  * The Opus Custom API is similar to the regular API but the
+  * @ref opus_encoder_create and @ref opus_decoder_create calls take
+  * an additional mode parameter which is a structure produced by
+  * a call to @ref opus_custom_mode_create. Both the encoder and decoder
+  * must create a mode using the same sample rate (fs) and frame size
+  * (frame size) so these parameters must either be signaled out of band
+  * or fixed in a particular implementation.
+  *
+  * Similar to regular Opus the custom modes support on the fly frame size
+  * switching, but the sizes available depend on the particular frame size in
+  * use. For some initial frame sizes on a single on the fly size is available.
+  */
+
+/** Contains the state of an encoder. One encoder state is needed
+    for each stream. It is initialized once at the beginning of the
+    stream. Do *not* re-initialize the state for every frame.
+   @brief Encoder state
+ */
+typedef struct OpusCustomEncoder OpusCustomEncoder;
+
+/** State of the decoder. One decoder state is needed for each stream.
+    It is initialized once at the beginning of the stream. Do *not*
+    re-initialize the state for every frame.
+   @brief Decoder state
+ */
+typedef struct OpusCustomDecoder OpusCustomDecoder;
+
+/** The mode contains all the information necessary to create an
+    encoder. Both the encoder and decoder need to be initialized
+    with exactly the same mode, otherwise the output will be
+    corrupted.
+   @brief Mode configuration
+ */
+typedef struct OpusCustomMode OpusCustomMode;
+
+/** Creates a new mode struct. This will be passed to an encoder or
+  * decoder. The mode MUST NOT BE DESTROYED until the encoders and
+  * decoders that use it are destroyed as well.
+  * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz)
+  * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each
+  *        packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes)
+  * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned)
+  * @return A newly created mode
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error);
+
+/** Destroys a mode struct. Only call this after all encoders and
+  * decoders using this mode are destroyed as well.
+  * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode);
+
+/* Encoder */
+/** Gets the size of an OpusCustomEncoder structure.
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @returns size
+  */
+OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size(
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+/** Creates a new encoder state. Each stream needs its own encoder
+  * state (can't be shared across simultaneous streams).
+  * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  decoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [out] error <tt>int*</tt>: Returns an error code
+  * @return Newly created encoder state.
+*/
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create(
+    const OpusCustomMode *mode,
+    int channels,
+    int *error
+) OPUS_ARG_NONNULL(1);
+
+/** Initializes a previously allocated encoder state
+  * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size.
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_custom_encoder_create(),opus_custom_encoder_get_size()
+  * To reset a previously initialized state use the OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  decoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @return OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT_STATIC int opus_custom_encoder_init(
+    OpusCustomEncoder *st,
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+/** Destroys a an encoder state.
+  * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0.
+  *          Samples with a range beyond +/-1.0 are supported but will
+  *          be clipped by decoders using the integer API and should
+  *          only be used if it is known that the far end supports
+  *          extended dynamic range. There must be exactly
+  *          frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float(
+    OpusCustomEncoder *st,
+    const float *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian).
+  *          There must be exactly frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+ */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode(
+    OpusCustomEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus custom encoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @see opus_encoderctls
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/* Decoder */
+
+/** Gets the size of an OpusCustomDecoder structure.
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @returns size
+  */
+OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size(
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+/** Creates a new decoder state. Each stream needs its own decoder state (can't
+  * be shared across simultaneous streams).
+  * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the
+  *          stream (must be the same characteristics as used for the encoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [out] error <tt>int*</tt>: Returns an error code
+  * @return Newly created decoder state.
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create(
+    const OpusCustomMode *mode,
+    int channels,
+    int *error
+) OPUS_ARG_NONNULL(1);
+
+/** Initializes a previously allocated decoder state
+  * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size.
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_custom_decoder_create(),opus_custom_decoder_get_size()
+  * To reset a previously initialized state use the OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  encoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @return OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init(
+    OpusCustomDecoder *st,
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+/** Destroys a an decoder state.
+  * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st);
+
+/** Decode an opus custom frame with floating point output
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(float)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    float *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode an opus custom frame
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    opus_int16 *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus custom decoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @see opus_genericctls
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_CUSTOM_H */
diff --git a/src/opus-1.0.2/include/opus_defines.h b/src/opus-1.0.2/include/opus_defines.h
new file mode 100644
index 00000000..cdde061a
--- /dev/null
+++ b/src/opus-1.0.2/include/opus_defines.h
@@ -0,0 +1,655 @@
+/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
+   Written by Jean-Marc Valin and Koen Vos */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus_defines.h
+ * @brief Opus reference implementation constants
+ */
+
+#ifndef OPUS_DEFINES_H
+#define OPUS_DEFINES_H
+
+#include "opus_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup opus_errorcodes Error codes
+ * @{
+ */
+/** No error @hideinitializer*/
+#define OPUS_OK                0
+/** One or more invalid/out of range arguments @hideinitializer*/
+#define OPUS_BAD_ARG          -1
+/** The mode struct passed is invalid @hideinitializer*/
+#define OPUS_BUFFER_TOO_SMALL -2
+/** An internal error was detected @hideinitializer*/
+#define OPUS_INTERNAL_ERROR   -3
+/** The compressed data passed is corrupted @hideinitializer*/
+#define OPUS_INVALID_PACKET   -4
+/** Invalid/unsupported request number @hideinitializer*/
+#define OPUS_UNIMPLEMENTED    -5
+/** An encoder or decoder structure is invalid or already freed @hideinitializer*/
+#define OPUS_INVALID_STATE    -6
+/** Memory allocation has failed @hideinitializer*/
+#define OPUS_ALLOC_FAIL       -7
+/**@}*/
+
+/** @cond OPUS_INTERNAL_DOC */
+/**Export control for opus functions */
+
+#ifndef OPUS_EXPORT
+# if defined(__GNUC__) && defined(OPUS_BUILD)
+#  define OPUS_EXPORT __attribute__ ((visibility ("default")))
+# elif defined(WIN32) && !defined(__MINGW32__)
+#  ifdef OPUS_BUILD
+#   define OPUS_EXPORT __declspec(dllexport)
+#  else
+#   define OPUS_EXPORT
+#  endif
+# else
+#  define OPUS_EXPORT
+# endif
+#endif
+
+# if !defined(OPUS_GNUC_PREREQ)
+#  if defined(__GNUC__)&&defined(__GNUC_MINOR__)
+#   define OPUS_GNUC_PREREQ(_maj,_min) \
+ ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min))
+#  else
+#   define OPUS_GNUC_PREREQ(_maj,_min) 0
+#  endif
+# endif
+
+#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
+# if OPUS_GNUC_PREREQ(3,0)
+#  define OPUS_RESTRICT __restrict__
+# elif (defined(_MSC_VER) && _MSC_VER >= 1400)
+#  define OPUS_RESTRICT __restrict
+# else
+#  define OPUS_RESTRICT
+# endif
+#else
+# define OPUS_RESTRICT restrict
+#endif
+
+/**Warning attributes for opus functions
+  * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out
+  * some paranoid null checks. */
+#if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
+# define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__))
+#else
+# define OPUS_WARN_UNUSED_RESULT
+#endif
+#if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
+# define OPUS_ARG_NONNULL(_x)  __attribute__ ((__nonnull__(_x)))
+#else
+# define OPUS_ARG_NONNULL(_x)
+#endif
+
+/** These are the actual Encoder CTL ID numbers.
+  * They should not be used directly by applications.
+  * In general, SETs should be even and GETs should be odd.*/
+#define OPUS_SET_APPLICATION_REQUEST         4000
+#define OPUS_GET_APPLICATION_REQUEST         4001
+#define OPUS_SET_BITRATE_REQUEST             4002
+#define OPUS_GET_BITRATE_REQUEST             4003
+#define OPUS_SET_MAX_BANDWIDTH_REQUEST       4004
+#define OPUS_GET_MAX_BANDWIDTH_REQUEST       4005
+#define OPUS_SET_VBR_REQUEST                 4006
+#define OPUS_GET_VBR_REQUEST                 4007
+#define OPUS_SET_BANDWIDTH_REQUEST           4008
+#define OPUS_GET_BANDWIDTH_REQUEST           4009
+#define OPUS_SET_COMPLEXITY_REQUEST          4010
+#define OPUS_GET_COMPLEXITY_REQUEST          4011
+#define OPUS_SET_INBAND_FEC_REQUEST          4012
+#define OPUS_GET_INBAND_FEC_REQUEST          4013
+#define OPUS_SET_PACKET_LOSS_PERC_REQUEST    4014
+#define OPUS_GET_PACKET_LOSS_PERC_REQUEST    4015
+#define OPUS_SET_DTX_REQUEST                 4016
+#define OPUS_GET_DTX_REQUEST                 4017
+#define OPUS_SET_VBR_CONSTRAINT_REQUEST      4020
+#define OPUS_GET_VBR_CONSTRAINT_REQUEST      4021
+#define OPUS_SET_FORCE_CHANNELS_REQUEST      4022
+#define OPUS_GET_FORCE_CHANNELS_REQUEST      4023
+#define OPUS_SET_SIGNAL_REQUEST              4024
+#define OPUS_GET_SIGNAL_REQUEST              4025
+#define OPUS_GET_LOOKAHEAD_REQUEST           4027
+/* #define OPUS_RESET_STATE 4028 */
+#define OPUS_GET_SAMPLE_RATE_REQUEST         4029
+#define OPUS_GET_FINAL_RANGE_REQUEST         4031
+#define OPUS_GET_PITCH_REQUEST               4033
+#define OPUS_SET_GAIN_REQUEST                4034
+#define OPUS_GET_GAIN_REQUEST                4045 /* Should have been 4035 */
+#define OPUS_SET_LSB_DEPTH_REQUEST           4036
+#define OPUS_GET_LSB_DEPTH_REQUEST           4037
+
+#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039
+
+/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */
+
+/* Macros to trigger compilation errors when the wrong types are provided to a CTL */
+#define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x))
+#define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr)))
+#define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr)))
+/** @endcond */
+
+/** @defgroup opus_ctlvalues Pre-defined values for CTL interface
+  * @see opus_genericctls, opus_encoderctls
+  * @{
+  */
+/* Values for the various encoder CTLs */
+#define OPUS_AUTO                           -1000 /**<Auto/default setting @hideinitializer*/
+#define OPUS_BITRATE_MAX                       -1 /**<Maximum bitrate @hideinitializer*/
+
+/** Best for most VoIP/videoconference applications where listening quality and intelligibility matter most
+ * @hideinitializer */
+#define OPUS_APPLICATION_VOIP                2048
+/** Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input
+ * @hideinitializer */
+#define OPUS_APPLICATION_AUDIO               2049
+/** Only use when lowest-achievable latency is what matters most. Voice-optimized modes cannot be used.
+ * @hideinitializer */
+#define OPUS_APPLICATION_RESTRICTED_LOWDELAY 2051
+
+#define OPUS_SIGNAL_VOICE                    3001 /**< Signal being encoded is voice */
+#define OPUS_SIGNAL_MUSIC                    3002 /**< Signal being encoded is music */
+#define OPUS_BANDWIDTH_NARROWBAND            1101 /**< 4 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_MEDIUMBAND            1102 /**< 6 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_WIDEBAND              1103 /**< 8 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_SUPERWIDEBAND         1104 /**<12 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_FULLBAND              1105 /**<20 kHz bandpass @hideinitializer*/
+
+/**@}*/
+
+
+/** @defgroup opus_encoderctls Encoder related CTLs
+  *
+  * These are convenience macros for use with the \c opus_encode_ctl
+  * interface. They are used to generate the appropriate series of
+  * arguments for that call, passing the correct type, size and so
+  * on as expected for each particular request.
+  *
+  * Some usage examples:
+  *
+  * @code
+  * int ret;
+  * ret = opus_encoder_ctl(enc_ctx, OPUS_SET_BANDWIDTH(OPUS_AUTO));
+  * if (ret != OPUS_OK) return ret;
+  *
+  * opus_int32 rate;
+  * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&rate));
+  *
+  * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
+  * @endcode
+  *
+  * @see opus_genericctls, opus_encoder
+  * @{
+  */
+
+/** Configures the encoder's computational complexity.
+  * The supported range is 0-10 inclusive with 10 representing the highest complexity.
+  * @see OPUS_GET_COMPLEXITY
+  * @param[in] x <tt>opus_int32</tt>: Allowed values: 0-10, inclusive.
+  *
+  * @hideinitializer */
+#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x)
+/** Gets the encoder's complexity configuration.
+  * @see OPUS_SET_COMPLEXITY
+  * @param[out] x <tt>opus_int32 *</tt>: Returns a value in the range 0-10,
+  *                                      inclusive.
+  * @hideinitializer */
+#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the bitrate in the encoder.
+  * Rates from 500 to 512000 bits per second are meaningful, as well as the
+  * special values #OPUS_AUTO and #OPUS_BITRATE_MAX.
+  * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much
+  * rate as it can, which is useful for controlling the rate by adjusting the
+  * output buffer size.
+  * @see OPUS_GET_BITRATE
+  * @param[in] x <tt>opus_int32</tt>: Bitrate in bits per second. The default
+  *                                   is determined based on the number of
+  *                                   channels and the input sampling rate.
+  * @hideinitializer */
+#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x)
+/** Gets the encoder's bitrate configuration.
+  * @see OPUS_SET_BITRATE
+  * @param[out] x <tt>opus_int32 *</tt>: Returns the bitrate in bits per second.
+  *                                      The default is determined based on the
+  *                                      number of channels and the input
+  *                                      sampling rate.
+  * @hideinitializer */
+#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x)
+
+/** Enables or disables variable bitrate (VBR) in the encoder.
+  * The configured bitrate may not be met exactly because frames must
+  * be an integer number of bytes in length.
+  * @warning Only the MDCT mode of Opus can provide hard CBR behavior.
+  * @see OPUS_GET_VBR
+  * @see OPUS_SET_VBR_CONSTRAINT
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Hard CBR. For LPC/hybrid modes at very low bit-rate, this can
+  *               cause noticeable quality degradation.</dd>
+  * <dt>1</dt><dd>VBR (default). The exact type of VBR is controlled by
+  *               #OPUS_SET_VBR_CONSTRAINT.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x)
+/** Determine if variable bitrate (VBR) is enabled in the encoder.
+  * @see OPUS_SET_VBR
+  * @see OPUS_GET_VBR_CONSTRAINT
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Hard CBR.</dd>
+  * <dt>1</dt><dd>VBR (default). The exact type of VBR may be retrieved via
+  *               #OPUS_GET_VBR_CONSTRAINT.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x)
+
+/** Enables or disables constrained VBR in the encoder.
+  * This setting is ignored when the encoder is in CBR mode.
+  * @warning Only the MDCT mode of Opus currently heeds the constraint.
+  *  Speech mode ignores it completely, hybrid mode may fail to obey it
+  *  if the LPC layer uses more bitrate than the constraint would have
+  *  permitted.
+  * @see OPUS_GET_VBR_CONSTRAINT
+  * @see OPUS_SET_VBR
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Unconstrained VBR.</dd>
+  * <dt>1</dt><dd>Constrained VBR (default). This creates a maximum of one
+  *               frame of buffering delay assuming a transport with a
+  *               serialization speed of the nominal bitrate.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x)
+/** Determine if constrained VBR is enabled in the encoder.
+  * @see OPUS_SET_VBR_CONSTRAINT
+  * @see OPUS_GET_VBR
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Unconstrained VBR.</dd>
+  * <dt>1</dt><dd>Constrained VBR (default).</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures mono/stereo forcing in the encoder.
+  * This can force the encoder to produce packets encoded as either mono or
+  * stereo, regardless of the format of the input audio. This is useful when
+  * the caller knows that the input signal is currently a mono source embedded
+  * in a stereo stream.
+  * @see OPUS_GET_FORCE_CHANNELS
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
+  * <dt>1</dt>         <dd>Forced mono</dd>
+  * <dt>2</dt>         <dd>Forced stereo</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x)
+/** Gets the encoder's forced channel configuration.
+  * @see OPUS_SET_FORCE_CHANNELS
+  * @param[out] x <tt>opus_int32 *</tt>:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
+  * <dt>1</dt>         <dd>Forced mono</dd>
+  * <dt>2</dt>         <dd>Forced stereo</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the maximum bandpass that the encoder will select automatically.
+  * Applications should normally use this instead of #OPUS_SET_BANDWIDTH
+  * (leaving that set to the default, #OPUS_AUTO). This allows the
+  * application to set an upper bound based on the type of input it is
+  * providing, but still gives the encoder the freedom to reduce the bandpass
+  * when the bitrate becomes too low, for better overall quality.
+  * @see OPUS_GET_MAX_BANDWIDTH
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband (default)</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x)
+
+/** Gets the encoder's configured maximum allowed bandpass.
+  * @see OPUS_SET_MAX_BANDWIDTH
+  * @param[out] x <tt>opus_int32 *</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband (default)</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
+
+/** Sets the encoder's bandpass to a specific value.
+  * This prevents the encoder from automatically selecting the bandpass based
+  * on the available bitrate. If an application knows the bandpass of the input
+  * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH
+  * instead, which still gives the encoder the freedom to reduce the bandpass
+  * when the bitrate becomes too low, for better overall quality.
+  * @see OPUS_GET_BANDWIDTH
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>                    <dd>(default)</dd>
+  * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x)
+
+/** Configures the type of signal being encoded.
+  * This is a hint which helps the encoder's mode selection.
+  * @see OPUS_GET_SIGNAL
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>        <dd>(default)</dd>
+  * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
+  * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured signal type.
+  * @see OPUS_SET_SIGNAL
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>        <dd>(default)</dd>
+  * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
+  * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x)
+
+
+/** Configures the encoder's intended application.
+  * The initial value is a mandatory argument to the encoder_create function.
+  * @see OPUS_GET_APPLICATION
+  * @param[in] x <tt>opus_int32</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured application.
+  * @see OPUS_SET_APPLICATION
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the sampling rate the encoder or decoder was initialized with.
+  * This simply returns the <code>Fs</code> value passed to opus_encoder_init()
+  * or opus_decoder_init().
+  * @param[out] x <tt>opus_int32 *</tt>: Sampling rate of encoder or decoder.
+  * @hideinitializer
+  */
+#define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the total samples of delay added by the entire codec.
+  * This can be queried by the encoder and then the provided number of samples can be
+  * skipped on from the start of the decoder's output to provide time aligned input
+  * and output. From the perspective of a decoding application the real data begins this many
+  * samples late.
+  *
+  * The decoder contribution to this delay is identical for all decoders, but the
+  * encoder portion of the delay may vary from implementation to implementation,
+  * version to version, or even depend on the encoder's initial configuration.
+  * Applications needing delay compensation should call this CTL rather than
+  * hard-coding a value.
+  * @param[out] x <tt>opus_int32 *</tt>:   Number of lookahead samples
+  * @hideinitializer */
+#define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's use of inband forward error correction (FEC).
+  * @note This is only applicable to the LPC layer
+  * @see OPUS_GET_INBAND_FEC
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Disable inband FEC (default).</dd>
+  * <dt>1</dt><dd>Enable inband FEC.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x)
+/** Gets encoder's configured use of inband forward error correction.
+  * @see OPUS_SET_INBAND_FEC
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Inband FEC disabled (default).</dd>
+  * <dt>1</dt><dd>Inband FEC enabled.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's expected packet loss percentage.
+  * Higher values with trigger progressively more loss resistant behavior in the encoder
+  * at the expense of quality at a given bitrate in the lossless case, but greater quality
+  * under loss.
+  * @see OPUS_GET_PACKET_LOSS_PERC
+  * @param[in] x <tt>opus_int32</tt>:   Loss percentage in the range 0-100, inclusive (default: 0).
+  * @hideinitializer */
+#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured packet loss percentage.
+  * @see OPUS_SET_PACKET_LOSS_PERC
+  * @param[out] x <tt>opus_int32 *</tt>: Returns the configured loss percentage
+  *                                      in the range 0-100, inclusive (default: 0).
+  * @hideinitializer */
+#define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's use of discontinuous transmission (DTX).
+  * @note This is only applicable to the LPC layer
+  * @see OPUS_GET_DTX
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Disable DTX (default).</dd>
+  * <dt>1</dt><dd>Enabled DTX.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x)
+/** Gets encoder's configured use of discontinuous transmission.
+  * @see OPUS_SET_DTX
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>DTX disabled (default).</dd>
+  * <dt>1</dt><dd>DTX enabled.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x)
+/** Configures the depth of signal being encoded.
+  * This is a hint which helps the encoder identify silence and near-silence.
+  * @see OPUS_GET_LSB_DEPTH
+  * @param[in] x <tt>opus_int32</tt>: Input precision in bits, between 8 and 24
+  *                                   (default: 24).
+  * @hideinitializer */
+#define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured signal depth.
+  * @see OPUS_SET_LSB_DEPTH
+  * @param[out] x <tt>opus_int32 *</tt>: Input precision in bits, between 8 and
+  *                                      24 (default: 24).
+  * @hideinitializer */
+#define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the duration (in samples) of the last packet successfully decoded or concealed.
+  * @param[out] x <tt>opus_int32 *</tt>: Number of samples (at current sampling rate).
+  * @hideinitializer */
+#define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x)
+/**@}*/
+
+/** @defgroup opus_genericctls Generic CTLs
+  *
+  * These macros are used with the \c opus_decoder_ctl and
+  * \c opus_encoder_ctl calls to generate a particular
+  * request.
+  *
+  * When called on an \c OpusDecoder they apply to that
+  * particular decoder instance. When called on an
+  * \c OpusEncoder they apply to the corresponding setting
+  * on that encoder instance, if present.
+  *
+  * Some usage examples:
+  *
+  * @code
+  * int ret;
+  * opus_int32 pitch;
+  * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch));
+  * if (ret == OPUS_OK) return ret;
+  *
+  * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
+  * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE);
+  *
+  * opus_int32 enc_bw, dec_bw;
+  * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw));
+  * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw));
+  * if (enc_bw != dec_bw) {
+  *   printf("packet bandwidth mismatch!\n");
+  * }
+  * @endcode
+  *
+  * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls
+  * @{
+  */
+
+/** Resets the codec state to be equivalent to a freshly initialized state.
+  * This should be called when switching streams in order to prevent
+  * the back to back decoding from giving different results from
+  * one at a time decoding.
+  * @hideinitializer */
+#define OPUS_RESET_STATE 4028
+
+/** Gets the final state of the codec's entropy coder.
+  * This is used for testing purposes,
+  * The encoder and decoder state should be identical after coding a payload
+  * (assuming no data corruption or software bugs)
+  *
+  * @param[out] x <tt>opus_uint32 *</tt>: Entropy coder state
+  *
+  * @hideinitializer */
+#define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x)
+
+/** Gets the pitch of the last decoded frame, if available.
+  * This can be used for any post-processing algorithm requiring the use of pitch,
+  * e.g. time stretching/shortening. If the last frame was not voiced, or if the
+  * pitch was not coded in the frame, then zero is returned.
+  *
+  * This CTL is only implemented for decoder instances.
+  *
+  * @param[out] x <tt>opus_int32 *</tt>: pitch period at 48 kHz (or 0 if not available)
+  *
+  * @hideinitializer */
+#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the encoder's configured bandpass or the decoder's last bandpass.
+  * @see OPUS_SET_BANDWIDTH
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>                    <dd>(default)</dd>
+  * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
+
+/**@}*/
+
+/** @defgroup opus_decoderctls Decoder related CTLs
+  * @see opus_genericctls, opus_encoderctls, opus_decoder
+  * @{
+  */
+
+/** Configures decoder gain adjustment.
+  * Scales the decoded output by a factor specified in Q8 dB units.
+  * This has a maximum range of -32768 to 32767 inclusive, and returns
+  * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment.
+  * This setting survives decoder reset.
+  *
+  * gain = pow(10, x/(20.0*256))
+  *
+  * @param[in] x <tt>opus_int32</tt>:   Amount to scale PCM signal by in Q8 dB units.
+  * @hideinitializer */
+#define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x)
+/** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN
+  *
+  * @param[out] x <tt>opus_int32 *</tt>: Amount to scale PCM signal by in Q8 dB units.
+  * @hideinitializer */
+#define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x)
+
+/**@}*/
+
+/** @defgroup opus_libinfo Opus library information functions
+  * @{
+  */
+
+/** Converts an opus error code into a human readable string.
+  *
+  * @param[in] error <tt>int</tt>: Error number
+  * @returns Error string
+  */
+OPUS_EXPORT const char *opus_strerror(int error);
+
+/** Gets the libopus version string.
+  *
+  * @returns Version string
+  */
+OPUS_EXPORT const char *opus_get_version_string(void);
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_DEFINES_H */
diff --git a/src/opus-1.0.2/include/opus_multistream.h b/src/opus-1.0.2/include/opus_multistream.h
new file mode 100644
index 00000000..658067f7
--- /dev/null
+++ b/src/opus-1.0.2/include/opus_multistream.h
@@ -0,0 +1,632 @@
+/* Copyright (c) 2011 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus_multistream.h
+ * @brief Opus reference implementation multistream API
+ */
+
+#ifndef OPUS_MULTISTREAM_H
+#define OPUS_MULTISTREAM_H
+
+#include "opus.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @cond OPUS_INTERNAL_DOC */
+
+/** Macros to trigger compilation errors when the wrong types are provided to a
+  * CTL. */
+/**@{*/
+#define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr)))
+#define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr)))
+/**@}*/
+
+/** These are the actual encoder and decoder CTL ID numbers.
+  * They should not be used directly by applications.
+  * In general, SETs should be even and GETs should be odd.*/
+/**@{*/
+#define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120
+#define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122
+/**@}*/
+
+/** @endcond */
+
+/** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs
+  *
+  * These are convenience macros that are specific to the
+  * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl()
+  * interface.
+  * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and
+  * @ref opus_decoderctls may be applied to a multistream encoder or decoder as
+  * well.
+  * In addition, you may retrieve the encoder or decoder state for an specific
+  * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or
+  * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually.
+  */
+/**@{*/
+
+/** Gets the encoder state for an individual stream of a multistream encoder.
+  * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you
+  *                                   wish to retrieve.
+  *                                   This must be non-negative and less than
+  *                                   the <code>streams</code> parameter used
+  *                                   to initialize the encoder.
+  * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given
+  *                                       encoder state.
+  * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
+  * @hideinitializer
+  */
+#define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y)
+
+/** Gets the decoder state for an individual stream of a multistream decoder.
+  * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you
+  *                                   wish to retrieve.
+  *                                   This must be non-negative and less than
+  *                                   the <code>streams</code> parameter used
+  *                                   to initialize the decoder.
+  * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given
+  *                                       decoder state.
+  * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
+  * @hideinitializer
+  */
+#define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y)
+
+/**@}*/
+
+/** @defgroup opus_multistream Opus Multistream API
+  * @{
+  *
+  * The multistream API allows individual Opus streams to be combined into a
+  * single packet, enabling support for up to 255 channels. Unlike an
+  * elementary Opus stream, the encoder and decoder must negotiate the channel
+  * configuration before the decoder can successfully interpret the data in the
+  * packets produced by the encoder. Some basic information, such as packet
+  * duration, can be computed without any special negotiation.
+  *
+  * The format for multistream Opus packets is defined in the
+  * <a href="http://tools.ietf.org/html/draft-terriberry-oggopus">Ogg
+  * encapsulation specification</a> and is based on the self-delimited Opus
+  * framing described in Appendix B of <a href="http://tools.ietf.org/html/rfc6716">RFC 6716</a>.
+  * Normal Opus packets are just a degenerate case of multistream Opus packets,
+  * and can be encoded or decoded with the multistream API by setting
+  * <code>streams</code> to <code>1</code> when initializing the encoder or
+  * decoder.
+  *
+  * Multistream Opus streams can contain up to 255 elementary Opus streams.
+  * These may be either "uncoupled" or "coupled", indicating that the decoder
+  * is configured to decode them to either 1 or 2 channels, respectively.
+  * The streams are ordered so that all coupled streams appear at the
+  * beginning.
+  *
+  * A <code>mapping</code> table defines which decoded channel <code>i</code>
+  * should be used for each input/output (I/O) channel <code>j</code>. This table is
+  * typically provided as an unsigned char array.
+  * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>.
+  * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is
+  * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code>
+  * is even, or  as the right channel of stream <code>(i/2)</code> if
+  * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as
+  * mono in stream <code>(i - coupled_streams)</code>, unless it has the special
+  * value 255, in which case it is omitted from the encoding entirely (the
+  * decoder will reproduce it as silence). Each value <code>i</code> must either
+  * be the special value 255 or be less than <code>streams + coupled_streams</code>.
+  *
+  * The output channels specified by the encoder
+  * should use the
+  * <a href="http://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-800004.3.9">Vorbis
+  * channel ordering</a>. A decoder may wish to apply an additional permutation
+  * to the mapping the encoder used to achieve a different output channel
+  * order (e.g. for outputing in WAV order).
+  *
+  * Each multistream packet contains an Opus packet for each stream, and all of
+  * the Opus packets in a single multistream packet must have the same
+  * duration. Therefore the duration of a multistream packet can be extracted
+  * from the TOC sequence of the first stream, which is located at the
+  * beginning of the packet, just like an elementary Opus stream:
+  *
+  * @code
+  * int nb_samples;
+  * int nb_frames;
+  * nb_frames = opus_packet_get_nb_frames(data, len);
+  * if (nb_frames < 1)
+  *   return nb_frames;
+  * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames;
+  * @endcode
+  *
+  * The general encoding and decoding process proceeds exactly the same as in
+  * the normal @ref opus_encoder and @ref opus_decoder APIs.
+  * See their documentation for an overview of how to use the corresponding
+  * multistream functions.
+  */
+
+/** Opus multistream encoder state.
+  * This contains the complete state of a multistream Opus encoder.
+  * It is position independent and can be freely copied.
+  * @see opus_multistream_encoder_create
+  * @see opus_multistream_encoder_init
+  */
+typedef struct OpusMSEncoder OpusMSEncoder;
+
+/** Opus multistream decoder state.
+  * This contains the complete state of a multistream Opus decoder.
+  * It is position independent and can be freely copied.
+  * @see opus_multistream_decoder_create
+  * @see opus_multistream_decoder_init
+  */
+typedef struct OpusMSDecoder OpusMSDecoder;
+
+/**\name Multistream encoder functions */
+/**@{*/
+
+/** Gets the size of an OpusMSEncoder structure.
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @returns The size in bytes on success, or a negative error code
+  *          (see @ref opus_errorcodes) on error.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size(
+      int streams,
+      int coupled_streams
+);
+
+/** Allocates and initializes a multistream encoder state.
+  * Call opus_multistream_encoder_destroy() to release
+  * this object when finished.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels in the input signal.
+  *                               This must be at most 255.
+  *                               It may be greater than the number of
+  *                               coded channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than the number of channels.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than the number of input channels.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    encoded channels to input channels, as described in
+  *                    @ref opus_multistream. As an extra constraint, the
+  *                    multistream encoder does not allow encoding coupled
+  *                    streams for which one channel is unused since this
+  *                    is never a good idea.
+  * @param application <tt>int</tt>: The target encoder application.
+  *                                  This must be one of the following:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
+  *                                   code (see @ref opus_errorcodes) on
+  *                                   failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create(
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping,
+      int application,
+      int *error
+) OPUS_ARG_NONNULL(5);
+
+/** Initialize a previously allocated multistream encoder state.
+  * The memory pointed to by \a st must be at least the size returned by
+  * opus_multistream_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of
+  * malloc.
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @see opus_multistream_encoder_create
+  * @see opus_multistream_encoder_get_size
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels in the input signal.
+  *                               This must be at most 255.
+  *                               It may be greater than the number of
+  *                               coded channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than the number of channels.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than the number of input channels.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    encoded channels to input channels, as described in
+  *                    @ref opus_multistream. As an extra constraint, the
+  *                    multistream encoder does not allow encoding coupled
+  *                    streams for which one channel is unused since this
+  *                    is never a good idea.
+  * @param application <tt>int</tt>: The target encoder application.
+  *                                  This must be one of the following:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
+  *          on failure.
+  */
+OPUS_EXPORT int opus_multistream_encoder_init(
+      OpusMSEncoder *st,
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping,
+      int application
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
+
+/** Encodes a multistream Opus frame.
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
+  * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved
+  *                                            samples.
+  *                                            This must contain
+  *                                            <code>frame_size*channels</code>
+  *                                            samples.
+  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
+  *                                 signal.
+  *                                 This must be an Opus frame size for the
+  *                                 encoder's sampling rate.
+  *                                 For example, at 48 kHz the permitted values
+  *                                 are 120, 240, 480, 960, 1920, and 2880.
+  *                                 Passing in a duration of less than 10 ms
+  *                                 (480 samples at 48 kHz) will prevent the
+  *                                 encoder from using the LPC or hybrid modes.
+  * @param[out] data <tt>unsigned char*</tt>: Output payload.
+  *                                           This must contain storage for at
+  *                                           least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode(
+    OpusMSEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes a multistream Opus frame from floating point input.
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
+  * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved
+  *                                       samples with a normal range of
+  *                                       +/-1.0.
+  *                                       Samples with a range beyond +/-1.0
+  *                                       are supported but will be clipped by
+  *                                       decoders using the integer API and
+  *                                       should only be used if it is known
+  *                                       that the far end supports extended
+  *                                       dynamic range.
+  *                                       This must contain
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
+  *                                 signal.
+  *                                 This must be an Opus frame size for the
+  *                                 encoder's sampling rate.
+  *                                 For example, at 48 kHz the permitted values
+  *                                 are 120, 240, 480, 960, 1920, and 2880.
+  *                                 Passing in a duration of less than 10 ms
+  *                                 (480 samples at 48 kHz) will prevent the
+  *                                 encoder from using the LPC or hybrid modes.
+  * @param[out] data <tt>unsigned char*</tt>: Output payload.
+  *                                           This must contain storage for at
+  *                                           least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float(
+      OpusMSEncoder *st,
+      const float *pcm,
+      int frame_size,
+      unsigned char *data,
+      opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Frees an <code>OpusMSEncoder</code> allocated by
+  * opus_multistream_encoder_create().
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed.
+  */
+OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st);
+
+/** Perform a CTL function on a multistream Opus encoder.
+  *
+  * Generally the request and subsequent arguments are generated by a
+  * convenience macro.
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls,
+  *                @ref opus_encoderctls, or @ref opus_multistream_ctls.
+  * @see opus_genericctls
+  * @see opus_encoderctls
+  * @see opus_multistream_ctls
+  */
+OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/**@}*/
+
+/**\name Multistream decoder functions */
+/**@{*/
+
+/** Gets the size of an <code>OpusMSDecoder</code> structure.
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @returns The size in bytes on success, or a negative error code
+  *          (see @ref opus_errorcodes) on error.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size(
+      int streams,
+      int coupled_streams
+);
+
+/** Allocates and initializes a multistream decoder state.
+  * Call opus_multistream_decoder_destroy() to release
+  * this object when finished.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels to output.
+  *                               This must be at most 255.
+  *                               It may be different from the number of coded
+  *                               channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    coded channels to output channels, as described in
+  *                    @ref opus_multistream.
+  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
+  *                                   code (see @ref opus_errorcodes) on
+  *                                   failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create(
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping,
+      int *error
+) OPUS_ARG_NONNULL(5);
+
+/** Intialize a previously allocated decoder state object.
+  * The memory pointed to by \a st must be at least the size returned by
+  * opus_multistream_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of
+  * malloc.
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @see opus_multistream_decoder_create
+  * @see opus_multistream_deocder_get_size
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels to output.
+  *                               This must be at most 255.
+  *                               It may be different from the number of coded
+  *                               channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    coded channels to output channels, as described in
+  *                    @ref opus_multistream.
+  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
+  *          on failure.
+  */
+OPUS_EXPORT int opus_multistream_decoder_init(
+      OpusMSDecoder *st,
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
+
+/** Decode a multistream Opus packet.
+  * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
+  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
+  *                                                Use a <code>NULL</code>
+  *                                                pointer to indicate packet
+  *                                                loss.
+  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
+  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
+  *                                       samples.
+  *                                       This must contain room for
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: The number of samples per channel of
+  *                                 available space in \a pcm.
+  *                                 If this is less than the maximum packet duration
+  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
+  *                                 of decoding some packets. In the case of PLC (data==NULL)
+  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
+  *                                 the duration of audio that is missing, otherwise the
+  *                                 decoder will not be in the optimal state to decode the
+  *                                 next incoming packet. For the PLC and FEC cases, frame_size
+  *                                 <b>must</b> be a multiple of 2.5 ms.
+  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
+  *                                 forward error correction data be decoded.
+  *                                 If no such data is available, the frame is
+  *                                 decoded as if it were lost.
+  * @returns Number of samples decoded on success or a negative error code
+  *          (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode(
+    OpusMSDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    opus_int16 *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode a multistream Opus packet with floating point output.
+  * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
+  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
+  *                                                Use a <code>NULL</code>
+  *                                                pointer to indicate packet
+  *                                                loss.
+  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
+  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
+  *                                       samples.
+  *                                       This must contain room for
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: The number of samples per channel of
+  *                                 available space in \a pcm.
+  *                                 If this is less than the maximum packet duration
+  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
+  *                                 of decoding some packets. In the case of PLC (data==NULL)
+  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
+  *                                 the duration of audio that is missing, otherwise the
+  *                                 decoder will not be in the optimal state to decode the
+  *                                 next incoming packet. For the PLC and FEC cases, frame_size
+  *                                 <b>must</b> be a multiple of 2.5 ms.
+  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
+  *                                 forward error correction data be decoded.
+  *                                 If no such data is available, the frame is
+  *                                 decoded as if it were lost.
+  * @returns Number of samples decoded on success or a negative error code
+  *          (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float(
+    OpusMSDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    float *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on a multistream Opus decoder.
+  *
+  * Generally the request and subsequent arguments are generated by a
+  * convenience macro.
+  * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls,
+  *                @ref opus_decoderctls, or @ref opus_multistream_ctls.
+  * @see opus_genericctls
+  * @see opus_decoderctls
+  * @see opus_multistream_ctls
+  */
+OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/** Frees an <code>OpusMSDecoder</code> allocated by
+  * opus_multistream_decoder_create().
+  * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed.
+  */
+OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st);
+
+/**@}*/
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_MULTISTREAM_H */
diff --git a/src/opus-1.0.2/include/opus_types.h b/src/opus-1.0.2/include/opus_types.h
new file mode 100644
index 00000000..b28e03ae
--- /dev/null
+++ b/src/opus-1.0.2/include/opus_types.h
@@ -0,0 +1,159 @@
+/* (C) COPYRIGHT 1994-2002 Xiph.Org Foundation */
+/* Modified by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/* opus_types.h based on ogg_types.h from libogg */
+
+/**
+   @file opus_types.h
+   @brief Opus reference implementation types
+*/
+#ifndef OPUS_TYPES_H
+#define OPUS_TYPES_H
+
+/* Use the real stdint.h if it's there (taken from Paul Hsieh's pstdint.h) */
+#if (defined(__STDC__) && __STDC__ && __STDC_VERSION__ >= 199901L) || (defined(__GNUC__) && (defined(_STDINT_H) || defined(_STDINT_H_)) || defined (HAVE_STDINT_H))
+#include <stdint.h>
+
+   typedef int16_t opus_int16;
+   typedef uint16_t opus_uint16;
+   typedef int32_t opus_int32;
+   typedef uint32_t opus_uint32;
+#elif defined(_WIN32)
+
+#  if defined(__CYGWIN__)
+#    include <_G_config.h>
+     typedef _G_int32_t opus_int32;
+     typedef _G_uint32_t opus_uint32;
+     typedef _G_int16 opus_int16;
+     typedef _G_uint16 opus_uint16;
+#  elif defined(__MINGW32__)
+     typedef short opus_int16;
+     typedef unsigned short opus_uint16;
+     typedef int opus_int32;
+     typedef unsigned int opus_uint32;
+#  elif defined(__MWERKS__)
+     typedef int opus_int32;
+     typedef unsigned int opus_uint32;
+     typedef short opus_int16;
+     typedef unsigned short opus_uint16;
+#  else
+     /* MSVC/Borland */
+     typedef __int32 opus_int32;
+     typedef unsigned __int32 opus_uint32;
+     typedef __int16 opus_int16;
+     typedef unsigned __int16 opus_uint16;
+#  endif
+
+#elif defined(__MACOS__)
+
+#  include <sys/types.h>
+   typedef SInt16 opus_int16;
+   typedef UInt16 opus_uint16;
+   typedef SInt32 opus_int32;
+   typedef UInt32 opus_uint32;
+
+#elif (defined(__APPLE__) && defined(__MACH__)) /* MacOS X Framework build */
+
+#  include <sys/types.h>
+   typedef int16_t opus_int16;
+   typedef u_int16_t opus_uint16;
+   typedef int32_t opus_int32;
+   typedef u_int32_t opus_uint32;
+
+#elif defined(__BEOS__)
+
+   /* Be */
+#  include <inttypes.h>
+   typedef int16 opus_int16;
+   typedef u_int16 opus_uint16;
+   typedef int32_t opus_int32;
+   typedef u_int32_t opus_uint32;
+
+#elif defined (__EMX__)
+
+   /* OS/2 GCC */
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#elif defined (DJGPP)
+
+   /* DJGPP */
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#elif defined(R5900)
+
+   /* PS2 EE */
+   typedef int opus_int32;
+   typedef unsigned opus_uint32;
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+
+#elif defined(__SYMBIAN32__)
+
+   /* Symbian GCC */
+   typedef signed short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef signed int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
+
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef long opus_int32;
+   typedef unsigned long opus_uint32;
+
+#elif defined(CONFIG_TI_C6X)
+
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#else
+
+   /* Give up, take a reasonable guess */
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#endif
+
+#define opus_int         int                     /* used for counters etc; at least 16 bits */
+#define opus_int64       long long
+#define opus_int8        signed char
+
+#define opus_uint        unsigned int            /* used for counters etc; at least 16 bits */
+#define opus_uint64      unsigned long long
+#define opus_uint8       unsigned char
+
+#endif  /* OPUS_TYPES_H */